Relief Valve Equipment Near Utah
-
Manufactured by Mueller Water Productsbased in CANADA
The 18-FR is a remote sensing, high capacity, spring and diaphragm operated, normally closed valve. The inner valve is held closed by the spring. When the sensed pressure increases above the spring setting, the valve ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-D and 206-RPS-D pressure differential sustaining valves are based on the 106-PG or 06-PG main valve. The RPS-D uses the 81-RPD pilot valve and has two sensing connections. The valve and pilot remain closed until the difference between the two pressures exceeds the pilot setting. Under flowing conditions, the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. The SAP panel energizes the control valve pilot solenoid on an abnormally low pressure reading and/or power ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Safety Selector Valve is designed specifically to function as an effective ‘switch-over’ device that permits routine or emergency servicing of redundant pressure relief devices with no process interruption, providing continuous system over-pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high ...
-
Manufactured by Mueller Water Productsbased in CANADA
The A106-Dynamic Lifter (DL) sewage pressure relief valve is a direct acting spring loaded relief valve. The valve is adjusted to open when the pressure exceeds the set-point, which is approximately 10% above the normal operating pressure. The valve closes drip-tight when pressure falls below the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The constant mixing of the biosolids in the digester could potentially create excessive foam build-up, which can clog digester cover equipment. The foam could clog the flame arresters installed with the Pressure and Vacuum Relief (PVR) Valves, especially without proper and routine maintenance. This leaves the PVR valves unable to perform ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-8700 pressure relief valve, which is UL / FM labelled and listed, automatically relieves excess pressure in the fire protection system to discharge. The RPS series valves will also automatically modulate to relieve excess pump capacity during pump start up and shut down, allowing the pump to operate without causing surges. These ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Aqua Power Mini Nozzle is an excellent grease removal nozzle that quickly cuts through grease while cleaning out pipes and saving time. The Aqua Power Mini Nozzle is an excellent all-around cleaning and grease removal nozzle for pipelines. The sleeve is included as a valuable tool when working in service laterals. The sleeve prolongs the life of the Aqua Power Mini by elevating the rotating ...
-
Manufactured by HotJet USAbased in USA
HotJet’s Xtreme Flow Drain Line Jetters are engineered for the Rooter and Plumber Professional and built to tackle the toughest blockages. Easy to operate and priced right - the unit will handle small lateral lines with the jumper hose assembly as well as larger lines up 12”. the unit includes our exclusive engineering features and the best warranty in the ...
-
Manufactured by HotJet USAbased in USA
HotJet’s Xtreme Flow Drain Line Jetters are engineered for the Rooter and Plumber Professional and built to tackle the toughest blockages. Easy to operate and priced right - the unit will handle small lateral lines with the jumper hose assembly as well as larger lines up 12”. the unit includes our exclusive engineering features and the best warranty in the ...
-
Manufactured by HotJet USAbased in USA
HotJet’s Xtreme Flow Drain Line Jetters are engineered for the Rooter and Plumber professional in mind. The cold water sewer and drain line jetters by HotJet USA are built to tackle the toughest blockages, are easy to operate and priced right – the dual engine 70HP unit will clear larger lines up to ...
-
Manufactured by HotJet USAbased in USA
HotJet’s Xtreme Flow Drain Line Jetters are engineered for the Rooter and Plumber Professional and built to tackle the toughest blockages. Easy to operate and priced right - the unit will handle small lateral lines with the jumper hose assembly as well as larger lines up 12”. the unit includes our exclusive engineering features and the best warranty in the ...
-
Manufactured by HotJet USAbased in USA
HotJet’s Dual Engine Hot and Cold Water Sewer Drain Line Jetters are engineered for theProfessional Rooter, Plumber and Municipalitiesand will tackle the toughest blockages!Extremely effective in removing grease, soils, ice build ups, and blockages in drain lines from 2” to 24”– Easy to operate and priced right! Our Hot Jet Units are truly versatile workhorses – and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you