Resistivity Meter Equipment Near Chile
-
Manufactured by RephiLe Bioscience, Ltdbased in USA
The PURIST Lab Ultrapure Water System produces ultrapure water from EDI, reverse osmosis (RO), distilled or deionized ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Capacity range 1.0 – 30.6 l/h, 10 – 2 bar. The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction ...
-
Manufactured by MoHo s.r.l.based in ITALY
A new approach to geoelectrical surveying. Electra is the MoHo’s digital system for geoelectrical surveys. A number of unique features make it a very special georesistivimeter. Acquisition times are considerably reduced due to the simultaneous acquisition on all channels and the use of alternate current. Weight, size and consumption are orders of magnitude lower than traditional systems. ...
-
Manufactured by California Analytical Instruments, Inc. (CAI)based in USA
Provides temperature-control circuits for oven, pump, internal heated sample line (up to 10 ft. between sampler and analyzer) and heated jacket(entry to analyzer). Ensures that critical components are heated to 191 ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Standard Features: 316 Stainless Steel Electro-polished & Passivated UV Chamber Construction. UV Lamp Status Indicator. Fan Cool Feature. Simple Dual Compression Seals. UV Sensor Port and Drain Port. UV System Run Time Meter. UV Resistant O-Rings and Gaskets. High Output UV Lamps. System capable of using 185nM or 254nM UV Lamps. ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Limiting drawdown is one of the basic requirements of proper low-flow sampling. The MicroPurge® MP30 (U.S. Patent Number 6,456,201) Drawdown/Water Level Meter provides a unique and simpler way to assure proper drawdown control. The MP30 switches between two modes- as a drawdown sensor and control when connected to the MicroPurge ...
-
Manufactured by In-Situ Environmentalbased in USA
Submersible stainless steel probe. Nylon or aluminum reels (for tapes longer than 150 m or 400 ft) mounted on sturdy polyurethane-coated steel frames. Available in metric or U.S. units in lengths up to 600 m (2,000 ft). Accuracy to each millimeter or 0.01 foot. Breaking load over 45 kg (100 lbs). DC to AC conversion prevents corrosion and mineral buildup on probe. Sensitivity dial filters out ...
-
Manufactured by In-Situ Environmentalbased in USA
. Yellow tape is easy to read and resists stretching under loads of 127 kg (280 lbs). With static and drawdown modes, the Water Level Meter 200 can take static level readings and then switch to drawdown mode to perform low-flow and pump tests. Additionally, the IP68-rated probe can be submerged in depths of up to 300 m (1,000 ft) to determine the ...
-
Manufactured by In-Situ Environmentalbased in USA
The In-Situ Water Level Meter 100 is an economical model of the Water Level Meter 200, with a Kevlar-reinforced polyethylene tape and stainless steel conductors. This affordable water level tape offers long-lasting performance for well drillers, pump installers, and other service users. With static and drawdown modes, the Water Level Meter 100 ...
-
PremiumManufactured by Myron L Companybased in USA
Conductivity or TDS & pH . No water supply is completely pure. Every industrial, commercial or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant ...
-
Manufactured by ZENNER International GmbH & Co. KGbased in GERMANY
to the use of high-grade materials, the diaphragm gas meter is resistant to ...
-
Manufactured by ZENNER International GmbH & Co. KGbased in GERMANY
The multi-jet wet dial meter MNK is an ideal domestic water meter for tamper-proof, high-precision consumption measurement. MNK is an MID compliant water meter, proven by the million, for service connection. Continuous further development guarantees the most precise measurement results and the best long-term stability. Its construction, ...
-
Manufactured by Sigma-Aldrichbased in USA
To reach the most reliable pure water quality, Elix High-Throughput systems are built on an optimized purification sequence: Tap water first enters the Progard pretreatment cartridge which efficiently removes particles & colloids, free chlorine and hardness before reverse osmosis (RO) purification. Elix systems benefit from advanced RO technology and E.R.A. technology, which controls water ...
-
Manufactured by Delmhorst Instrument Cobased in USA
The G-7 is a rugged resistance-type meter, great for testing the moisture content of grain at harvest time and while in storage. The integral double-disc electrode cup holds only 3-4 grams, allowing for more uniform sampling and providing accurate and repeatable readings. You can even attach optional accessories to check moisture in bulk ...
-
Manufactured by Delmhorst Instrument Cobased in USA
Moisture meter for paper and cardboard. Multifunctional moisture meter for quick and accurate measurements of moisture residu. For measurements in and on the surface of the materials. Special electrodes for measuring the moisture content in books, paper bales and cardboard, thin paper or tissue sheets, ...
-
Manufactured by TSI Incorporatedbased in USA
The Kestrel 5400 is revolutionary in size, cost and capability for those in need of measuring Heat Stress. The Kestrel 5400 is revolutionary in size, cost and capability for those in need of measuring Heat Stress. Available with or without LiNK (Bluetooth) and / or a compass. Along with having a Wet Bulb Global Temperature reading, the Kestrel 5400 displays thermal work limit (“TWL”), ...
-
Manufactured by HydroTech Inc.based in USA
Standard Apollo EDI models are available for any high-purity application from 15,000 to over 150,000 GPD. Feed water must be R.O. water or the equivalent. Apollo EDI systems are designed to produce 16-18 meg-ohm ultrapure permeate water suitable for most electronics, semi-conductor, and pharmaceutical applications. Apollo EDI systems offer a compact, modular, and reliable solution for production ...
-
Manufactured by Wyo-Ben, Inc.based in USA
BIG HORN 20 is a specially sized pure sodium bentonite for use in binding, sealing, absorbing and general ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you