Showing results for: Respirable Dust Sampling Equipment
-
Manufactured by Vaibhav Equipment Servicebased in INDIA
, arrangement for parallel gaseous sampling, light provision for working in night & dark area, design to runs continuously 24 hours or more, common body (housing) structure for all the model which will easy converted to any of the below model, suitable for outdoor use, corrosion free lockable ...
-
Manufactured by Drop Enviro Engineers & Servicesbased in INDIA
DROP Enviro Engineers & Service made Respirable dust sampler ,PMI-410 NL sampler uses an improved cyclone (with sharper cutoff) to separate the coarser particles (>10 microns) from the air stream before filtering it on the 0.5 micron pore size filter allowing measurement of both TSP and Respirable fraction of suspended Particulate ...
-
Manufactured by Vaibhav Equipment Servicebased in INDIA
Special features: confirm to bis 5182 (part 23) : 2006 standard, sampling flow rate will maintain automatic at pre set level even during filter chocking, ampere & voltage variation with electronic feedback controller, digital manometer with volume totalizing (waterless manometer, no need of filling and adjusting zero lever with distilled ...
-
Manufactured by Amaze Instrumentsbased in INDIA
Particles In The Air Are Sampled At Constant Rate Of 0.9 To 1.3 M3 /Min Through The Inlet Of Cyclone. By Virtue Of Their Momentum, Particles Greater Than 10 Microns Are Carried Vertically Upwards By The Air Flow And Collected On A Filter Paper Of 8 X 10 Inch ...
-
Manufactured by Soniya Scientific Equipment Solutions Pvt. Ltd.based in INDIA
SSES-APD-001 suck ambient air using low maintenance brushless and noiseless blower through corrosion free aluminum modular pipe and pass thorough a sharp cutoff cyclone which divides the particulate matters in two fractions: one below 10 microns (10µ). The Respirable dust (below 10 microns) directly get deposited on the glass micro ...
-
Manufactured by Yash Engineersbased in INDIA
The instrument is used for the measurement of Suspended particulate matters having size less than 10 microns. Respirable Dust Sampler is supplied with seperate Cyclone Assembly alongwith Yash High Volume Sampler(H.V.S) Unit. PM10 is defined as particulate matter (PM) with a mass median aerodynamic diameter less than 10 micrometers (um) - ...
-
Manufactured by VayomTechbased in INDIA
VYOMTECH Respirable Dust Sampler VTM-560BL is latest Dust sampler for monitoring of Respirable Dust (PM10) using the sharp cut-off cyclone and collected on the glass Microfibre filter paper. It can also be used for simultaneously monitoring of gaseous pollutants like SO2, NOx etc. using the Gaseous attachment. ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon 10mm Conductive Nylon Cyclone (Dorr-Oliver style) is used in conjunction with 37mm filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a respirable ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Respirable Dust Aluminum Cyclone is used in conjunction with 37mm 3 piece open face filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon’s 10mm Nylon Cyclone is designed to separate respirable dust particles from non-respirable particles and allow the respirable particles to be collected on a filter cassette. Model 456243 is designed to fit Zefon mining cassettes and is specified for use in coal mine dust sampling per 30 ...
-
Manufactured by Envirotech Instruments Pvt. Ltd. (EIPL)based in INDIA
The Respirable Dust Sampler is essentially a particulate sampling system requiring a high flow-rate. Gaseous sampling requires only a few LPM of air flow. All models of Envirotech Respirable Dust Samplers are provided with a suction port and mounting hardware to facilitate interface of the ...
-
Manufactured by Soniya Scientific Equipment Solutions Pvt. Ltd.based in INDIA
The Respirable Dust Sampler is essentially a particulate sampling system requiring a high flow-rate. Gaseous sampling (for NO2, SO2, CL2, NH3, O3, H2S, etc) requires only a few LPM of air flow. Soniya Scientific Equipment Solution Respirable Dust Samplers SSES-APD-001 and PM10/2.5 Sampler ...
-
Manufactured by Envirotech Instruments Pvt. Ltd. (EIPL)based in INDIA
Envirotech introduced the APM 451 Respirable Dust Sampler based on CSIR NEERI knowhow. The system was upgraded to APM 460 in 1997. The APM 460 sampler uses an improved cyclone with sharper cutoff (D50 at 10 microns) to separate the coarser particulates from the air stream before filtering it on the glass microfibre filter. By using the APM ...
-
Manufactured by GSA Messgerätebau GmbHbased in GERMANY
The air sampler SG10-2A incl. charger, personal air sampling system for the determination of hazardous substances in the air at work places (total dust and fine dust), flow rate 3.5-10 l/min. It has been developed for the sampling of gaseous and particulate matter, particularly for the sampling with 10 l/min, the ...
-
Manufactured by Sterlitech Corporationbased in USA
Sterlitech Silver Metal Filter Membranes are pure metallic silver (99.97% pure silver) and are available with particle retention ratings of 0.2 to 5.0 microns. Silver metal membrane cells are used in a variety of filtration applications, and their ability to withstand extreme chemical and thermal stress makes them ideal for applications involving aggressive fluids and/or high ...
-
Manufactured by SKCbased in USA
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which means the Sidekick is suitable for dust and gas sampling projects. The lower flows are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you