rotary lobe blower Equipment

62 Results found
Only show results in Virginia?
OK
  • Keyword: rotary lobe blower ×

Model SdB Series - Rotary Lobe Blowers

by Air Power Products Limited     based in Cambridge, ONTARIO (CANADA)

Efficient and Long-Lasting SDB Rotary Lobe Blowers. Rotary lobe blowers are used to provide air flow under pressure or vacuum conditions for industrial and commercial processes. Air Power Products Ltd. offers Greatech G-series and SdB Series rotary lobe blowers for this purpose. These blowers are designed to provide the most economical operation ...


AERZEN Delta Hybrid - Rotary Lobe Compressor Units

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The unique combined experience from the worlds of rotary lobe blowers and screw compressors is the foundation upon which the new groundbreaking and futureoriented Delta Hybrid technology has been developed – the first series of AERZEN Rotary Lobe Compressors. Delta Hybrid, the groundbreaking Rotary Lobe Compressor, is the result of a synergy ...

Volumetric Rotary Lobe Blower

by Mion Ventoltermica Depurazioni S.p.A.     based in Maserada sul Piave, ITALY

Volumetric rotary lobe blower designed specifically for blowing air and materials at a long distance (with ratio of 0.3 cubic meters per Kilo ). It enables the material to be conveyed with reduced-diameter pipes without any wear to the machine because only clean air passes through, and this enables energy saving, as  well as no abrasions or ...

Elmo Rietschle - Model R-Series - Rotary Lobe Blowers

by Gardner Denver     based in Quincy, ILLINOIS (USA)

These compact rotary lobe blowers belong to the group of dry running positive displacement pumps. This means that there is no need for oil or grease in the compression chamber. Only gear box and bearings, which are separated from the pumping chamber, are oil lubricated. Two non contacting triple lobed rotary lobe rotors rotate against ...

Model R-Series - Rotary Lobe Blowers: rugged and economical

by Gardner Denver Schopfheim GmbH     based in Schopfheim, GERMANY

These compact rotary lobe blowers belong to the group of dry running positive displacement pumps. This means that there is no need for oil or grease in the compression chamber. Only gear box and bearings, which are separated from the pumping chamber, are oil lubricated. Two non contacting triple lobed rotary lobe rotors rotate against each other ...

Rotary Lobe Blower units & Exhausters Robox

by ROBUSCHI S.p.A.     based in Parma, ITALY

The innovative blower group for a wide range of applications.

Delta Blower - Model 5 - Blower Units Generation

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The Delta Blower Generation 5 is the synthesis of the successful characteristics developed in previous generations combined with new technical innovations that already meet the market requirements of the future.

AERZEN Turbo Generation - Model 5 - Turbo Blowers Generation for Sewage Treatment Processes

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Both positive displacement and turbo machines are used in sewage treatment processes. The experienced application specialist Aerzener Maschinenfabrik GmbH now offers both technologies from one single source. Therefore, plant operators can rest assured to receive tailor-made solutions from Aerzen.

Aerzen - Bulk Vehicle Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

AERZEN Bulk Vehicle Blowers are manufactured in two- and three-lobe design and usable for conveying of air. Intake volume flow approx. 600 up to 2.250 m³/h.

Model Series GR - Process Gas Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The Process Gas Blower series GR is usable for nearly all technical gases and gas mixtures, which may also be aggressive. Intake volume flow approx. 100 up to 50.000 m³/h.

Model Series GQ - Process Gas Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The process gas blowers series GQ is usable for nearly all technical gases and gas mixtures in all industrial ranges. Intake volume flow approx. 1.500 up to 100.000 m3/h.

Vacuum Blowers With Pre-Inlet Cooling

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Experts in vacuum: AERZEN blowers with pre-inlet coolingFor pre-inlet cooling the housing is equipped with an additional third socket on the suction side. The lube oil supply is effected by splash oil lubrication. The conveying chamber is sealed vacuum-tightly by a sealing system. The driving shaft is sealed by double radial seal rings with grease ...

Model Series GM - Positive Displacement Blower

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower type GM is suitable for oil-free conveying of air and neutral gases. Intake volume flow approx. 30 to 65.000 m³/h.

Model Series CM - Vacuum Blowers With Canned Drive

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The new AERZEN blowers with canned drive are designed for the conveyance of air and neutral gases and are especially applied in the industrial high-vacuum technology. The blowers cover with a total of 14 sizes theoretical intake volume flows from 105 m³/h to 15.330 m³/h and pressure ranges up to 10-5 mbar abs.

Aerzen - Model Series HV - Vacuum Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

AERZEN vacuum blowers, series HV are designed for conveyance of air and neutral gases. These machines are especially used in the industrial vacuum technology, such as the coating of glass and foil, the packing technology, metallurgy and many other applications. These blowers represent the most extensive vacuum series world-wide and cover with ...

Model Series GM...DZ - High-Pressure Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Special solutions for preadmission applicationsThe direct-drive GM ... dz blowers from AERZEN are highperformance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. Available in a wide ...

Model RBDV - 3 Lobe Rotary Blowers

by ROBUSCHI S.p.A.     based in Parma, ITALY

The RB-DV series consists of 3 lobe rotary blowers used as exhausters which makes it possible to reach a high compression ratio by means of a patented atmospheric air injection device ROBUSCHI that reduces overheating of the gas and the power absorbed by the blower.

Model AQUA SERIES - Twin Lobe Rotary Air Blowers

by TMC Fluid Systems, Inc.     based in Tustin, CALIFORNIA (USA)

Aqua Series Twin Lobe Rotary Air Blowers (Roots Blowers) are specifically designed to meet the electroplating, aquaculture, and aqua-farming requirements which essentially demand 100% Oil Free Air. These roots blowers are totally dry machines and lubricating chambers are physically isolated from the main gas chamber ensuring 100% oil free air ...

Model R-VWP - Volume Flow Vacuum Pumps

by Gardner Denver Schopfheim GmbH     based in Schopfheim, GERMANY

Contact-free operating two (R-WVB 25) or three (R-WVB 120 - 8,300) lobed rotary blower designed for use with vacuum operations to a maximum 0.5 bar (abs.). R-WVB (01): Base unit with bare shaft extension, no motor. R-WVB (30): Compact unit. R-WVB (70): Compact unit with an acoustic enclosure. Low noise level and low pulsation, high efficiency due ...

Model R-VPR - Volume Flow Vacuum Pumps

by Gardner Denver Schopfheim GmbH     based in Schopfheim, GERMANY

A pump set consisting of V-VC in combination with rotary lobe vacuum pump. Primarily used for production of fine vacuum for general industrial applications. Ultimate vacuum until 0,01 mbar (abs.) possible.

Need help finding the right suppliers?

Let the XPRTs do the work for you