Injectors for chlorine gas, series DULCO Vaq, generate a stable vacuum even at high operating pressures. Safe vacuum technology: A defined vacuum adapted to the operating statuses and performance requirements is required to meter chlorine gas safely and on-demand.
1 – 2,000 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 10,000 m3/h. Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon CDVc can be easily and safely integrated into any water treatment process.
8 – 12,000 g/h chlorine dioxide. Max. flow rate at 0.2 ppm ClO2 metering is 60,000 m3/h. Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.
For swimming pools with volumes up to 100 m3. Chlorine-free water treatment system for environmentally operated private pools. Safe water disinfection with active oxygen as a turnkey complete solution.
The transmitter DULCOMETER® DMTa converts the sensor signals for pH, ORP value, chlorine concentration and conductivity into an interference-insensitive 4-20 mA analogue signal. Flexible, safe and always the optimum resolution of measured value.
Ozone is the most powerful oxidizer and disinfectant commercially available that can be safely used in water treatment. It is an environmentally friendly alternative to chemicals. Due to the instability of the ozone molecule, it is generated at the point of use and is easily converted back to oxygen. Ozone can literally oxidize material in water ...
ESP Safety’s SSS-903 Toxic Gas Detector is designed to safely detect and monitor a variety of toxic gases in the air, including hydrogen sulfide, carbon monoxide, chlorine, nitric oxide, and sulfur dioxide, over a range of 0-100 ppm. By connecting the sensor to the transmitter, the SSS-903 is programmed to automatically recognize a ...