Sample Automation Equipment Available In Uruguay
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Bringing the analytical power of MALDI-TOF-MS to uHTS: MALDI spotting of 1536 samples in less than 10 minutes. Parallel transfers of 96, 384 and 1536 samples with CyBio Well vario. No interferences thanks to intelligent washing routines. Highly homogenous target spots thanks to active sample drying. Highly precise spotting for reliable, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Sample Processor for the automated analysis of routine samples using 916 Ti-Touch or 915 KF Ti-Touch. Sample Processor with one workstation and one built-in membrane pump for the automatic processing of potentiometric as well as Karl Fischer titrations, in series with small to medium quantities. In addition to the built-in pump, ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
Single sample automation with powerful overpressure sampling for any kind of sample. Automatic sampling, rinsing and drying of the density meter. Performs sample delivery with pressurized air, automatic rinsing with two different solutions and complete drying with a desiccator. Contamination free ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
Multiple sample automation with powerful overpressure sampling for any kind of sample. Automatic sampling, rinsing and drying of the density meter. The SC30 is a sample changer with 30 positions. It performs sample delivery with pressurized air, automatic rinsing with two ...
-
Manufactured by PIKE Technologiesbased in USA
The AutoDiff is a high performance, automated diffuse reflectance accessory developed to analyze multiple samples with minimal user intervention. Typical applications include powdered pharmaceutical samples, high throughput forensic sampling, kidney stone analysis, soils and analysis of many other powdered ...
-
based in GERMANY
are suitable for use on the Agilent Bravo platform. Meeting the demands of reproducible, robust and sensitive proteomics sample preparation for LC-MS analysis, these applications allow research labs to partially automate proteomics processing, decreasing the hands on ...
-
Manufactured by LCTech GmbHbased in GERMANY
. The FREESTYLE BASIC consists of a xyz-robot including injection pump, sample loop, solvent distribution and double-walled ...
-
Manufactured by PPM Technologybased in UNITED KINGDOM
The PPM Technology interface board (ifB) has been designed to connect the Formaldemeter or Glutaraldemeter to third party systems. The interface board can be configured to give different voltage outputs; a 4–20mA current output and also give a relay alarm output. Various modes of operation are available to suit a whole array of uses, applications and ...
-
Manufactured by Teledyne CETAC Technologiesbased in USA
The APS-1650 Automated Preparation Station prepares off-line sample dilutions with specific intentions for use in the oil analysis industry. Before wear metals samples can be analyzed, they must be prepared by means of a relatively simple dilution (usually by a factor of ten). However, these dilutions are time consuming and carry the ...
-
based in USA
The SmartCEMS Remote Automated Sample and Calibration, or RASCAL, interfaces with the PEMS or DAHS and performs automatic audits and report generation for PS-16 compliant RAAs. The remote calibrator is used with a portable analyzer to provide a complete automated compliance package minimizing maintenance staff and costs for PEMS QA onsite. ...
-
Manufactured by AcouSort ABbased in SWEDEN
AcouSort is developing OEM modules based on our proprietary acoustic technology, enabling streamlined integration of sample preparation into third-party analytical or diagnostic systems or consumables for point-of-care diagnostics. The OEM modules are the size of an USB flash drive and are integrated in-line with the sample flow ...
-
Manufactured by Thomas Cain, Inc.based in USA
The ERICA system is very similar to the DEENA II, except the ERICA only dispenses the reagents. It does not heat the samples. It is fully automated with four BELL-Art racks that hold the vials for ease of handling and portability. The Machine will handle up to four reagents, or eight with upgrade, and allows up to six ...
-
based in GERMANY
contamination, sample loss and reproducibility? The solution: Automate! Introducing the PreON® platform; built to address the demands of reproducible, robust and sensitive proteomics sample preparation for LC-MS analysis. It allows research labs to automate proteomics processing at the push of a button decreasing the ...
-
Manufactured by LEAP Technologies by Trajan Scientific and Medicalbased in USA
LEAP has developed a 'Press' accessory,LEAP X-Press, for the PAL which allows samples to be filtered reliably and repeatably. It does not require external pneumatics, but compress the filter chambers. Samples can be processes in batch mode or 'just in time' before direct injection to the LC valve. The LEAP X-Press can be used for ...
-
Manufactured by Gerstel Incbased in USA
GERSTEL provides unmatched sample preparation capabilities by combining GERSTEL sample preparation and introduction modules with various configurations of the MultiPurpose Autosampler (MPS). The GERSTEL MPS is fully programmable in each configuration using advanced MAESTRO software functions to perform automated sample ...
-
Manufactured by AusDiagnosticsbased in AUSTRALIA
MT-Prep™ XL is the synergy between innovative Hamilton robotics with custom-designed Kingfisher Presto technology. This platform enables fully automated high-throughput sample purification. ...
-
Manufactured by bbi-biotech GmbHbased in GERMANY
The perfect split of all transfer hoses of the bioPROBE quad allows simultaneous automatic sampling from up to four bioreactors in parallel operation – all around the clock. This protects from fallible manual diligence work during bioreactor and fermenter operations, which often occurs when tiny sampling intervals are ...
-
Manufactured by Formulatrixbased in USA
The PULSE - TFF System is a fully-automated, true walk away system that uses miniaturized tangential flow filtration (TFF) for sample concentration and diafiltration (buffer exchange, desalting). Gone are the frequent trips to the centrifuge to check on samples and balancing tubes! ...
-
Manufactured by Elemental Scientific (ESI)based in USA
The new prepFAST S is an ultraclean automated sample introduction system for direct analysis of high purity chemicals by ICPMS. The prepFAST S uses inline syringe-driven flows of UPW, high purity HNO3 and standard spike to automate sample and standard preparation.The ICPMS may be calibrated using either external autocalibration ...
-
Manufactured by ECH Elektrochemie Halle GmbHbased in GERMANY
The Aquamax KF PRO LPG fulfils the requirements of the standard ASTM D 7995 - 19: Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you