Sample Bag Equipment
-
Manufactured by JS Holdingsbased in UNITED KINGDOM
Sample Bags, 13″ x 18″, plain (pkt of ...
-
Manufactured by JS Holdingsbased in UNITED KINGDOM
Sample Bags, 11″ x 16″, plain (pkt of ...
-
Manufactured by CEL Scientific Corporationbased in USA
CEL Scientific Kynar gas sampling bags are made of 3mil or 4mil Kynar PVDF (PolyVinyliDene Fluoride) film. Kynar is transparent, tough, durable, and has excellent chemical resistance because of its unique properties. We can offer Kynar bags in all sizes up to 1000L. All of our stock bags feature an eyelet and our patent-pending ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Fabricated from five layers of very distinct materials to achieve low permeability numbers. These bags are used when the sample must be kept in the bag for long periods of time. However, one must adjust for the inner layer of polyethylene which might affect the stored sample. These bags are tough, economical and ...
-
Manufactured by Vitrocell Systems GmbHbased in GERMANY
A sampling bag can be easily and directly connected to the module using the VITROCELL® SPIDER. The bag can be filled from various sources. If samples must be taken from the indoor/outdoor environment, VITROCELL® offers a special vacuum filling system for the sampling bag which is then ...
-
Manufactured by EMLab P&Kbased in USA
These 3x5 ziplock bags are specially marked for asbestos samples. These bags can be used for transport of bulk or asbestos cassette samples to the laboratory. 1,000 per ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Polyvinylidene Difluoride, or PVDF is a highly non-reactive and pure thermoplastic fluoropolymer. Analytical Specialties is pleased to announce the formal introduction of our line of Kynar® film Sampling Bags. The development of this film began many years ago when the automotive industry realized that the present film specified in the ...
-
Manufactured by Analytical Specialties, Inc.based in USA
This innovative change to sampling bag design allows for total evacuation of a sample bag. The Krinkle bags eliminate the need for extensive fitting configurations without concerns about dead air space created by special fittings. The Black Krinkle bags are light ...
-
Manufactured by Tisch Environmental Inc. - Tisch Internationalbased in USA
on the valve. Due to the single barb design, a 1/4 inch compression fitting may also be utilized. The removal of a gas sample from a filled bag can be difficult to accomplish without contamination from the ambient environment. This may now be accomplished with complete confidence by using the BGI Zero Head Space ...
-
Manufactured by Labplasbased in CANADA
These sterile sampling bags with their built-in secure closure tabs are ideal for the shipping and storage of all forms of sample material. Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® ...
-
Manufactured by Jensen Inert Productsbased in USA
ALTEF is a proprietary fluoropolymer film devel oped specially for the air sampling market.ALTEF meets or exceeds many of the desired characteristics of Tedlar at a significantly lower ...
-
Manufactured by CEL Scientific Corporationbased in USA
2-in-1 fittings available in polypropylene (left), stainless steel (middle), and PTFE (right). New design fully automatic vacuum air sampling box is available to order NOW!, CEL Scientific gas sampling bags are made of DuPont's 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide ...
-
Manufactured by Analytical Specialties, Inc.based in USA
DuPont Tedlar, a good choice for your sampling bag needs. Tedlar bags are tough, chemically inert, low permeability and re-usable when purged with nitrogen before each re-use. This re-use property makes Tedlar sampling bags very economical. Rated for continuous use up to 225° F when used with the ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Fluropolymer (FEP) Film | Fluropolymer (FEP) Gas Samplign Bags. The most inert material available for storage of samples available, Fluropolymer's (FEP) only drawbacks are permeability and cost. Fluropolymer (FEP) offers the highest use temperatures of all the sampling materials from -400°F to +400°F. FEP type, -400°F to ...
-
Manufactured by Adtech Polymer Engineeringbased in UNITED KINGDOM
Tedlar® gas sample bags are generally used for gas, odour and automotive emission sampling for VOC’s. Tedlar® film is tougher and more economical than FEP and is commonly used in vehicle emission testing. Our gas sampling bags are manufactured in a range of standard sizes, from 1 to 300 litres, and ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Double Weight, Aged Saran Bags: These Saran Gas Sampling Bags are made of a double weight, 2 mil (0.002 inch) thick type 18-100 Saran, specially treated to minimize permeability. Our Saran Gas Sampling Bags are as chemically inert as Teflon Bags, but are less ...
-
Manufactured by Calibrated Instruments, LLCbased in USA
The construction and materials of Cali-5-Bond™ gas sampling bags ensure the physical integrity of any sample taken, it remains truly representative of its collection environment or medium conditions. Cali-5-Bond™ bags allow all samples to be stored without change over ...
-
Manufactured by Sigma-Aldrichbased in USA
General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and ...
-
Manufactured by Advantec MFS, Inc.based in USA
For sterile sampling of soild and/or liquid samples. Composed of polyethylene blended with ethyl vinyl acetate for transparency and strength Bags seal easily yet seal tightly Approved by the FDA and USDA for food sampling Also available with absorbent, sterile sponge (free from growth inhibitors) or sodium thiosulfate tablet (for ...
-
Manufactured by Jensen Inert Productsbased in USA
Prices include Locking Combo Valve with septum. Bags with grommets available. 3/16' OD stem for use with most 1/4' OD plastic and fluropolymer tubing. Bags with multiple fittings available. Swagelok® PTFE and other fittings available upon ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you