Sample Gas Equipment
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
These micro gas sampling pumps are designed to provide a constant flow of air across any of our sample draw sensors, or sensors with tube cap kits. This makes them perfect for bench-top testing of sensors for closed-loop sampling ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
The Gasmet portable sampling system has been designed for portable emission monitoring measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are all ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Maximum flue gas temperature: 600°C. Ambient operating temperature: -20°C to +80°C. Protection degree: IP65. Filtration chamber volume: 120 ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
GSP-300 explosion-proof sampling probe is for the explosion-proof occasions. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
With SysMoG GH2ASBUSTERS, depth-specific gas sampling is carried out with a SysMoG® probe and a winch (to a depth of 1500 m, 3000 m is under development). The system consists of a borehole probe with a chamber into which the gases (dissolved in the groundwater) diffuse. When the gas pressure in the probe has stabilised, the ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Pro Multi-Gas Sampling Data Logger (CM-1000) is designed to simultaneously measure multiple gas concentrations through a sampling method. Utilizing a micropump, the device will draw samples into the sensing chambers allowing each sensor to take a fast and accurate measurement of the ...
-
PremiumManufactured by AMS, Inc.based in USA
Soil gas sampling and monitoring with direct push methods are commonly used with soil gas surveys for the investigation of volatile organic compounds. AMS offers soil gas sampling systems with several options to allow sampling for a wide variety of regulatory and standard ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and ...
-
Manufactured by Subhash Instrumentsbased in INDIA
Design: Surface-mounting housing 1/2 19 inch, 6 height units. Mounting: On the wall with mounting brackets supplied or in a 19-inch cabinet / rack. Housing material and color: Sheet steel; light gray (RAL 7035), basalt gray (RAL 7012). Degree of protection of housing: IP 20 to EN 60529. Weight: approx. 15.6 /16.5 kg with 1/2 heat ...
-
Manufactured by Axis Solutions Pvt. Ltd.based in INDIA
The reliable and long-term operation of an analyzer system depends upon the efficiency of the sample conditioning system for which a stable dew point of the sample is ...
-
Manufactured by BHB – Sistemas de Controlo e Medidabased in PORTUGAL
The sample gas conditioning system is intended to condition and treat the gas sample until it reaches the gas analyzer. As the NDIR gas analyzers need a completely dry gas sample for the measurement procedure, it is recommended to have a Gas ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis For emission and process monitoring For continuous pumping of sample gas For installation in gas analysis systems Suitable for mobile devices Applicable for long tube and hose ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For removal of dust and contamination from sample gas. For protection of the analysers. For integration in gas analysis ...
-
Manufactured by Subhash Instrumentsbased in INDIA
Design: Surface-mounting housing 1/2 19 inch, 6 height units. Mounting: On the wall with the mounting brackets supplied or in a 19 inch cabinet / rack. Housing material and color: Sheet steel; light gray (RAL 7035), basalt gray (RAL 7012). Degree of protection of housing: IP 20 to EN ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For e.g. biogas plants. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you