Sample Gas Equipment Near Australasia
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 500 mL, PTFE ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Stopcock Plug ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 250 mL, PTFE ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 1000 mL, glass ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 125 mL, glass ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 125 mL, PTFE ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 500 mL, glass ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 1000 mL, PTFE ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Gas Sampling Bulb size 250 mL, glass ...
-
Manufactured by Tanabyte Engineering, Inc.based in USA
The Model 726 is a basic analyzer, like the 722, but includes a Cal/Sample valve that can direct either sample gas or calibration gas to the Equivalent Method Photometer. The valve can be switeched either by external control via digital inputs or by internal timer control. Installed in either Docking Station, the Model 726 is an ...
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GD 4508/16 is a 1 to 16 point gas sampling system for use in commercial buildings to control fresh air make up in rooms relative to external fresh air. Available for: Carbon Monoxide (CO), Oxygen (Oâ‚‚) or Carbon Dioxide (CO2). Designed, manufactured and supported locally in ...
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GDA 4500 is designed to be used where sensors are placed in areas that are difficult to gain access such as pits and elevated areas. Designed, manufactured and supported locally in ...
-
Distributed by Australian Dynamic Technologies (ADT)based in AUSTRALIA
This gas analyzer (ZRE) is capable of measuring the concentration of NO, SO2, CO2, CO, CH4 and O2 components in sample gas. NO,SO2,CO2,CO and CH4 are measured by non-dispersion infrared method (NDIR), while O2 is measured by fuel cell, or zirconia method. Up to 5 components including O2 can be measured ...
-
Manufactured by CAC Gas & Instrumentationbased in AUSTRALIA
The Welker HGS Heated Gas Sampler is a composite sampling solution for natural gas at or near the hydrocarbon dew point The HGS maintains the sampling equipment above the hydrocarbon dew point to ensure composite samples are representative and not distorted by phase change. Connect the HGS to a ...
-
Manufactured by CAC Gas & Instrumentationbased in AUSTRALIA
With an unparalleled history of representative sampling, repeatability, and accuracy, the Welker GSS-4PM Gas Sampling System has proven itself to be the superior composite sampling solution for natural gas—wet or dry. clean or dirty. The self-purging probe-mounted system collects fresh ...
-
Manufactured by EffecTech Limitedbased in UNITED KINGDOM
Measurement errors can occur at any stage in the gas quality measurement system. EffecTech’s ISO 17020 accredited inspection provides an objective assessment of the sampling system, pressure reduction system, carrier and calibration gas systems against industry best practice. This gives confidence that the sampled ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you