sample preparation Equipment | Environmental XPRT

Showcase

Fritsch Pulverisette - Model 19 - Universal Cutting Mill - Variable Speed 300-3000 rpm

Variable 300 – 3000 rpm for fine comminution: Due to the variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm you can fine tune the comminution process for each sample within a very wide range of applications. The high-speed Universal Cutting Mill PULVERISETTE 19 with a ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Cutting Mills Product line

Premium

Analytik Jena - Model TOPwave - Sample Preparation System

and few consumables. This intelligent vessel design minimizes subsequent costs and simplifies the handling. All vessel types can be opened and closed by hand, without any tools. An optional evaporation unit can be used for sample ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Sample Preparation Product line

Premium

Metrohm - Sample Preparation for VA: UV Digestion

Voltammetry, being highly specific, can deal with high salt loads. Organic contamination of a sample, however, can interfere with the VA trace analysis of heavy metals. The 909 UV Digester quickly and effectively breaks down organic molecules by UV photolysis, thereby enabling reliable determinations. ...

By Metrohm AG based in Herisau, SWITZERLAND. from Voltammetry/CVS Product line

Premium

Analytik Jena - Model MALDI-TOF-MS - Automated Sample Preparation for uHTS

Bringing the analytical power of MALDI-TOF-MS to uHTS: MALDI spotting of 1536 samples in less than 10 minutes. Parallel transfers of 96, 384 and 1536 samples with CyBio Well vario. No interferences thanks to intelligent washing routines. Highly homogenous target spots thanks to active sample drying. Highly ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Liquid Handling & Automation - MALDI-TOF-MS Product line

Premium

Metrohm - Model 2.815.0010 - 815 Robotic USB Sample Processor XL (1T/1P)

Robotic USB Sample Processor XL with one workstation and one built-in membrane pump for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. In addition to the built-in pump, an additional one (membrane or peristaltic) and up to three ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

Metrohm - Model 2.814.0110 - 814 USB Sample Processor (2T/2P)

USB Sample Processor with two workstations and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, two additional pumps (membrane or peristaltic) and up to three dosing devices for Liquid Handling tasks ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

FRITSCH - Model PULVERISETTE 9 - Vibrating Cup Mill

The new, completely modified FRITSCH Vibrating Cup Mill PULVERISETTE 9 offers many practical advantages in all areas in which hard, brittle and fibrous material must be ground extremely quick down to analytical fineness. The PULVERISETTE 9 is very powerful, especially quiet, simple to operate, quick to clean and has a well-conceived drive concept and the grinding set is safe and easy to ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Disk Mills Product line

Premium

Metrohm - Model 2.815.0130 - 815 Robotic USB Sample Processor XL for the Automatic Processing

Robotic USB Sample Processor XL for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to four pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected. Because of the multitude of ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

Fritsch Pulverisette - Model 19 large - Universal Cutting Mill - Variable Speed 50-700 rpm

Variable 50 – 700 rpm for powerful comminution of larger amounts: The PULVERISETTE 19 large is our powerful low-speed Universal Cutting Mill for fast reproducible comminution of hard, tough-elastic and temperature sensitive materials and plastics with a maximum feed size of 120 x 85 mm and a throughput of up to 85 l/h with a low rotational speed of 50-700 rpm and a maintenance-free 2.8 kW ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Cutting Mills Product line

Premium

AIRSENSE - Sampling and Sample Preparation Kit

On-site sampling for later analysis through GC/MS or TD/GC/MS. In case of chemical accidents or fires where there was a release of chemicals, it is necessary to put appropriate analytical technologies in place as soon as possible in order to analyze the released substances. For that purpose the Sampling ...

By AIRSENSE Analytics GmbH based in Schwerin, GERMANY. from Others Product line

Premium

Fritsch Pulverisette - Model 19 Large/19 - Cutting Mill Combinations

-performance Cyclone separator, it is possible, for example, to process 2 litres of sample material with a particle size of 30 mm in only one single ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Cutting Mills Product line

Premium

Fritsch Pulverisette - Model 19 - Universal Cutting Mill - Variable Speed 50-700 rpm

hard, tough-elastic samples with a maximum feed size of 70 x 80 mm and a throughput of 60 l/h. At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided. One special advantage: Straw, films and ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Cutting Mills Product line

Premium

Metrohm - Model 2.815.0020 - 815 Robotic USB Sample Processor XL (1T/2P)

Robotic USB Sample Processor XL with one workstation and two built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected. Because of the ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

Metrohm - Model 2.941.0010 - 941 Eluent Production Module

The 941 Eluent Production Module enables the automatic production of an eluent. It enables continuous working without manual intervention and guarantees stable retention times. It can be combined with all Metrohm IC instruments and is monitored by MagIC ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

Fritsch Pulverisette - Model 5/2 Classic Line - Planetary Ball Mill

Ideal for comminution with 2 working stations: The Planetary Mill PULVERISETTE 5 classic line, with two working stations delivers fast and reliable, due to the particularly high-energy effect of the grinding balls, loss-free grinding results of hard, medium-hard, soft, brittle, tough and moist materials down to colloidal fineness. Depending on the desired final fineness, can the grinding be ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Planetary Mills Product line

Premium

Fritsch Pulverisette - Model 19 Large - Universal Cutting Mill - Variable Speed 300-3000 rpm

Variable 300 – 3000 rpm for fine comminution of larger amounts: The PULVERISETTE 19 large is our high-speed Universal Cutting Mill with a torque of 30 Nm for the comminution of dry, soft to medium hard samples as well as fibrous materials and plastics with reliable reproducible results with a maximum feed ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Cutting Mills Product line

Premium

Metrohm - Model 2.815.0030 - 815 Robotic USB Sample Processor XL (1T/0P)

Robotic USB Sample Processor XL with one workstation for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to two pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected. ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

Fritsch Pulverisette - Model 11 - Knife Mill

for sample preparation in the fields of foodstuffs or animal feed testing, pharmaceuticals and chemistry and many other ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Knife Mill Product line

Premium

Metrohm - Model 2.815.0120 - 815 Robotic USB Sample Processor XL (2T/4P)

Robotic USB Sample Processor XL with two workstations and four built-in membrane pumps for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to three dosing devices for Liquid Handling tasks can be connected. Because of the ...

By Metrohm AG based in Herisau, SWITZERLAND. from Titration - Sample Preparation for Titration Product line

Premium

Fritsch Pulverisette - Model 14 Premium Line - Variable Speed Rotor Mill

for the particularly fast comminution of soft to medium-hard, brittle as well as fibrous materials and temperature-sensitive samples with an extremely fast sample throughput, which can be further increased by the use of the FRITSCH Cyclone ...

By Fritsch GmbH - Milling and Sizing based in Idar-Oberstein, GERMANY. from Sample Preparation - Milling - Rotor/Beater Mills Product line