Sample Transport Equipment Near Utah
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using high-resolution ultraviolet (UV) technology in a dual-beam, multiple-wavelength configuration, the 900 is specifically designed to meet the demanding analytical requirements of modern sulfur recovery processes. Capable of measuring up to four species simultaneously, this air demand analyzer is uniquely capable of monitoring off-ratio applications, providing accurate chemical concentration ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Housed in an explosion-proof package, the 932 is a multi-component ultraviolet (UV) photometric gas analyzer which measures up to five gas species at the same time. Hydrogen sulfide (H2S) and sulfur dioxide (SO2) are the primary measured components. The analyzer can also be configured to measure carbonyl sulfide (COS) and/or carbon disulfide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and nitric ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The IPS-4 is a cost-effective, low maintenance photometric spectrometer with the ability to measure up to eight analytes in a gas or liquid phase sample. Available in UV-VIS, NDIR and IR/UV platforms, it provides a fully integrated sample conditioning system for easy maintenance. The IPS-4 has an IP65enclosure and is durable enough for ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using proven ultraviolet (UV) technology, the 930 identifies potential safety risks in sulfur storage locations through simultaneous hydrogen sulfide (H2S) and sulfur dioxide (SO2) measurements. Capable of stable, sensitive measurements ranging from parts-per-million (ppm) to percentage levels, the analyzer offers output alarms for the lower explosive limit of H2S and smoldering fire level of ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Measuring hydrogen sulfide (H2S), the 931 is a rugged, single-ultraviolet (UV) component photometric analyzer with a low-maintenance, no-moving-parts design, housed in an explosion-proof package. It can also be configured for primary measurements of sulfur dioxide (SO2), carbonyl sulfide (COS), carbon disulfide (CS2) or ammonia (NH3), and provided with a thermal conductivity detector (TCD) for ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS 2" flighted auger kit is equipped to drill access holes up to 9' deep. The included 1 1/2" x 6" soil core sampler may then be used to collect soil samples in liners. Additional extensions may be added to obtain deeper depths. Kit Includes Bosch 11245, 5/8" threaded male to SDS Max adapter, 1 1/2" x 6" soil core sampler, slide hammer, ...
-
PremiumManufactured by AMS, Inc.based in USA
The ESS Core N' OneTM disposable soil core sampler is the easiest way to sample and transport 5 grams of undisturbed soil samples for US EPA Method 5035. CNO is both a soil collection and transport container. CNO capsule incorporates an extruding feature; no need for expensive tools. Threaded septa closure insures air tight seal. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas ...
-
PremiumManufactured by ENVEAbased in FRANCE
to eliminate all condensation issues (water interference-free). This also reduces the risk of contamination of the analyzer (low concentrations). The dilution allows sample measurements in highly corrosive, dirty or high concentration conditions. The diluted sample is transported in an unheated sample line to the analyzer. This ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 1409 is a reliable, easy-to-use multipoint sampler for gas sampling of up to 24 different locations. The Innova 1409 is designed to be remotely controlled from a PC using a USB interface in conjunction with an Innova Photoacoustic Gas Monitor to provide a flexible, sensitive, and accurate monitoring ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Sterile surface swabs are an easy way to sample suspect areas for mold contamination. Simply swab the suspect area and submit to a laboratory where the sample will be cultured and the type of mold identified. Each swab comes in an easy to use container for sampling, transport and ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Bio-Tape™ provides a standardized sampling method for the determination of mold, microbial, bioaerosol, and inorganic dust contamination. It provides the ability to quickly take a sample and measure the relative degree of contamination. It is especially useful when sampling valuable or non-transportable materials and is ...
-
Manufactured by Buck Scientific Incbased in USA
The 230ATS Atomic Absorption Spectrometer comes with three powered lamp brackets inside of the instrument and can be upgraded to include D2 background ...
-
Manufactured by Buck Scientific Incbased in USA
The 230ATS Atomic Absorption Spectrometer comes with three powered lamp brackets inside of the instrument and can be upgraded to include D2 background ...
-
Manufactured by Buck Scientific Incbased in USA
Our innovative optical design unlocks the full potential of atomic absorption, providing greater sensitivity and lower detection limits than traditional systems. By maximizing energy throughput, our instruments can measure lower concentrations of key elements like Arsenic and Selenium without expensive EDL ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you