sampling chamber equipment in Japan

  • SPECTRO - Sample Introduction Systems

    The modular mounted sample introduction systems enable easy access and offer the possibility to customize components for specific applications. Some of the selections include; concentric glass nebulizers, cross flow nebulizers, ML nebulizers and parallel path PTFE nebulizers. Spray chambers include; Scott type glass and HF resistant chambers, ...

  • SPECTRO MIDEX M

    The SPECTRO MIDEX M is a multi-purpose X-ray micro fluorescence analysis (XRMF) system for non-destructive analysis of very small samples in solid or liquid form. It is especially suitable for point analysis, line scan, and mapping. For determining the exact measurement position in the spaciously dimensioned sample chamber, there is an integrated ...

    By SPECTRO Analytical Instruments - AMETEK, Inc Office in Tokyo, JAPAN. from SPECTRO MIDEX M Product line

  • Model UVHM-4000 - For UV Curing Resin (Outgas While Hardening)

    UVHM-4000 is an outgas collector to trap outgas from ultraviolet curable samples under UV irradiation. UVHM-4000 has a conventional chamber for general outgas sampling as an option.

  • Model C-52 - Sample Chamber

    Wescor's sample chamber, model C-52, can measure the water potential of solutions, small soil or leaf samples, and leaf discs. Due to the solid aluminum housing, the C-52 provides highly accurate water potential measurements without the need for a constant temperature bath. The C-52 must be connected to a Wescor water potential instrument such as ...

    By ELITech Group Distributor in Fukuoka-city, JAPAN. from Sample Chamber Product line

  • Showcase

    Model 04.31 - Delft Bottle Suspended Load Sediment Sampler

    This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the ...

  • Premium

    Model UVP - Incubator

    The UVP Incubator provides precise temperature control and uniformity for the incubation of biological assays, fungal, bacterial cultures, eggs and other samples up to 68 °C. The instrument is equipped with built-in overhead shortwave 254nm UV tubes for sterilization of the incubation chamber between experiments. By utilizing the germicidal ...

    By Analytik Jena AG Office in Yokohama, Kanagawa, JAPAN. from Incubator Product line

  • Premium

    Model UVP - Hybridizer Oven

    The UVP Hybridizer Oven provides uniform temperature and rotation controls for thorough mixing of materials. UVP Hybridizer Oven is ideal for Southern, Northern, and Western blots; in situ hybridization; and binding nucleic acids to nitrocellulose or nylon-reinforced transfer membranes or other media. Precise microprocessor rotation speed and ...

    By Analytik Jena AG Office in Yokohama, Kanagawa, JAPAN. from Hybridizer Oven Product line

  • Premium

    Biometra - Model Horizon - Agarose Gel Electrophoresis Systems

    Agarose Gel Electrophoresis Systems in Three Standard Sizes. The well-established Biometra Horizon® Family includes three different chamber sizes. All of them excel in their compact user-friendly construction. The safety interlock lid prevents an electrical connection until the lid is properly in place. Gel casting works very fast with ...

    By Analytik Jena AG Office in Yokohama, Kanagawa, JAPAN. from Agarose Gel Electrophoresis Systems Product line

  • Premium

    AMS - Bottom Dredges

    Easily sample most types of bottom surfaces. Constructed from stainless steel and powder-coated carbon steel for corrosion resistance. The top of the sampling chamber is screened to allow water flow during deployment and reduce the frontal shock wave that may displace sediment as the dredge contacts the sample surface. A two-way spring-loaded ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Tokyo, JAPAN. from Bottom Dredges Product line

  • Premium

    Specac Selector - Diffuse Reflectance Environmental Chamber Plus Spares

    Specac offers an Environmental Chamber designed for use with the Selector™ Diffuse Reflectance Accessory. This Environmental Chamber extends the sampling capabilities of the Selector™ by allowing the study of a diffusely reflecting sample at temperatures up to 800°C and pressures from vacuum (0.001 Torr) to 500 psi. Solid or powder ...

    By Specac Limited Distributor in Tokyo, JAPAN. from Diffuse Reflectance Environmental Chamber Plus Spares Product line

  • Premium

    NISKIN-X - Model 1010X - External Spring Water Sampler

    1010X External Spring Water Sampling Bottles Now you can have the simplicity and reliability of a Niskin water sampler and have a completely unobstructed sample chamber. The new Niskin X utilizes stainless steel external spring closures. The Niskin X Water Sampler can be activated by the GO Devil Messenger (1000-MG) when individually or serially ...

    By General Oceanics Inc. Distributor in Tokyo, JAPAN. from External Spring Water Sampler Product line

  • Premium

    Tekran - Model 1110 - Synchronized Two Port Sampling System

    The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

    By Tekran Instruments Corporation Distributor in Ibaraki-ken, JAPAN. from Synchronized Two Port Sampling System Product line

  • Premium

    AMS - Soggy Bottom Sampler System

    Stops caving sediment!Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling depth, the inner rods ...

  • Premium

    Russian Peat Borer

    The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Tokyo, JAPAN.

  • Premium

    AMS - Gouge Auger

    Designed for sampling wet clay and peat! The AMS gouge auger is designed for collection of undisturbed samples from very soft and preferably very wet soils with minimal disturbance of soft cohesive layers. Constructed from a long, tapered stainless steel, semi-cylindrical chamber, which is pushed into the soil, twisted and recovered to display a ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Tokyo, JAPAN. from Gouge Auger Product line

  • Premium

    AMS - Russian Sediment/Peat Borer Complete Kit

    The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal ...

  • Freezer/Mill - Model 6875D - Dual Chamber Cryogenic Grinder

    The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding of tough and/or temperature sensitive samples. The mill cools samples to cryogenic temperatures, then pulverizes them by magnetically shuttling a ...

    By SPEX SamplePrep, LLC Distributor in JAPAN. from Dual Chamber Cryogenic Grinder Product line

  • Model LP-27 - Leaf Press

    This leaf press was designed at the University of Minnesota.  The liquid sample is extracted directly to a filter paper disc.  The disc can then be inserted into a Wescor Vapor Pressure Osmometer or a C-52 Sample Chamber for determination of the osmotic potential. Using this press simplifies the liquid extraction process and reduces ...

    By ELITech Group Distributor in Fukuoka-city, JAPAN. from Leaf Press Product line

  • Model L-51 and L-51A - Hygrometer

    The L-51 Leaf Hygrometer is designed for in situ measurement of leaf water potential, using either the wet bulb or dew point method of data readout.  L-51A has a special chamber configuration for use with grass.  The all-metal thermocouple mounting system is similar to that used in the C-52 Sample Chamber.  Given isothermal ...

    By ELITech Group Distributor in Fukuoka-city, JAPAN. from Hygrometer Product line

  • SWAN - Analyzer AMI Silica for Complete Monitoring System

    Complete monitoring system for the automatic, continuous measurement of silica in water steam cycles. Measuring range: 1 to 5'000ppb. Based on colorimetric measurement principle. Complete system including: measurement and control electronics, photometer with integrated reaction chamber, flow indicator, reagent dosing system and reagent containers. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you