sampling container Equipment available in Moldova

Available in Moldova| Near Moldova
1373 Results found

We couldn't find any sampling container equipment in Moldova

Here is a list of results available in Moldova

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: sampling container ×

  • Available in: Europe ×

  • Available in: Moldova ×

Eigenbrodt - Dry Sample Container Unit (DSC)

by Eigenbrodt GmbH & Co. KG     based in Königsmoor, GERMANY

For certain research project it is not only interesting to sample the wet only deposition, but also the dry only deposition at the same place during periods of no precipitation. The DSC-unit allows this type of samples. It maintains open during periods of no rain, and will be closed with the coverlid during rainy periods automatically. The ...

Rotating Carousel for Multiple Sample Containers

by Sentry Equipment Corp     based in Oconomowoc, WISCONSIN (USA)

The Model IC is designed to collect individual or composite samples in multiple containers. Compatible with most Sentry liquid or bulk solids automatic samplers.


Specac - Oil in Water Analysis Kit

by Specac Limited     based in Orpington, UNITED KINGDOM

Specac’s Oil in Water Analysis Kit contains all the necessary FTIR instrument accessories to implement ASTM test method D7066-04 for the analysis of total recoverable oil, grease, or petroleum hydrocarbons in water. The kit comprises of three matched pairs of infrared grade quartz cells supplied in 10, 50, and 100 mm pathlengths and a 3' x ...

Protea - Model SSCM - Self-contained Sampling System Control Module

by Protea Limited     based in Middlewich, UNITED KINGDOM

Self-contained sampling control for use with Protea core gas analysers. The control of the gas sample in any analysis system is critical. From heated sample lines and probes to pump control, the management of the system is important to stop any damage to analytical hardware. For this reason, Protea supplies the Sampling System Control Module ...

Sep-Pak SPE - Sample Extraction Instruments

by Waters Corporation     based in Milford, MASSACHUSETTS (USA)

Sep-Pak products are recognized worldwide and remain the most referenced SPE products for GC/MS, HPLC, and LC/MS analysis, offering a wide variety of chemistries and configurations to complement the 96-well and patented* uElution plate format. Each design configuration offers specific functional benefits, but all contain the same high quality ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

Model QX Series - Fully Automated Gravimetric Sample Preparation

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The ultimate in high quality batch sample preparation. Reduce Errors with Perfect Concentration. To prepare a solution, powder and liquids are dispensed automatically. Gravimetric sample preparation ensures the highest level of reproducibility; errors are reduced  by up to 60 %.

Analytik Jena - Model TOPwave - Sample Preparation System

by Analytik Jena AG     based in Jena, GERMANY

TOPwave – Sample preparation at the highest level. TOPwave is a versatile system offering a variety of digestion vessels, fulfilling all requirements of modern applications. Its innovative design combines highest operating comfort with maximum safety and performance. The different vessel types are made of a high performance fluoropolymer, ...

Motorized Foot Valve Pump

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

Among other items the standard set contains a foot valve pump suitable for two pumping tubes, tube guides, ball valves, polyethylene tube and an aluminium tripod. The revolutionary PowerPack PP1, a borehole sampling system for groundwater and leachate, is light enough to be carried by one person. It’s powerful enough to lift water from 50 m ...

Oil Spill Sampling & Transport Kit

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

This new sampling system developed in conjunction with the U.S. Coast Guard overcomes the problems of collection and transportation of thin oil sheen samples to the laboratory for identification.

Suspended Load Sampler, Delft Bottle Type

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the ...

Peat Sampler

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. 1The sample containing section is sealed off by a plate (fin) that can pivot around the axle ...

Soil Corer for Soils With Volatile Components

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

A compact, multifunctional corer for taking soil samples (possibly containing volatiles). The 16-ml (about 25 g) soil samples are cut from above the ground surface. They can then be packed so that they are protected from sorption (without synthetic materials), leakage and diffusion, and are then refrigerated or frozen. Analysis subsequently takes ...

Peat Profile Sampler - Type Wardenaar

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

Until recently, sampling undisturbed peat profiles in peat lands, was a very difficult activity. Digging and sampling profile pits in most peat lands is difficult (if not impossible) as they would immediately fill with water and the walls would slump. Researching the ecology of peat land environments and the dynamics and stratigraphy of peat ...

Model C - Soil Sample Ring Kits

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

Sample ring kit, model C, for all soils to a depth of up to 2 m. The sample sets with postfix SC, for very hard soils, can be used to take samples in virtually all soils. The samples can be taken on the surface, in auger holes or in profile pits, above as well as under the groundwater level. The closed ring holder in this set is fitted with a ...

Go-Flo - Model 1080 - Water Sampling Bottles

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model ...

Niskin - Model 1010 - Water Sampler

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Non-metallic free-flushing sampling bottles activated by GO Devil messenger (1000-MG) when individually or serially attached to hydrocable. Sequential closure by remote command with model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control option.

Akkerman - Core Sampler, Standard Set

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into ...

Auger Set for Heterogeneous Soils

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

01.11.SO. Augerings and samplings in homegeneous soils (soils with an uniform soil profile), in almost all cases can be executed with one type of auger. For augerings in heterogeneous soils (soils with a layered soil profile), several different auger types will be applied. This has led to the composition of an auger set for heterogeneous soils. ...

Sampling Volatiles: Soil Coring Kit for Chemical Soil Research

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

Soil sampling for the determination of the presence of very volatile components such as benzene, toluene, xylene and chlorinated hydrocarbons should be executed with samplers that prevent the sample from being exposed to air. Preferably the sampling must be done without disturbance of the soilaggregates to prevent mixing with air.

Related Terms for sampling container

Need help finding the right suppliers?

Let the XPRTs do the work for you