Sampling Equipment Equipment Near Nunavut
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Without too much effort the gouges can be extracted from the soil by using rod pullers, which can be provided in different designs. The first gouge can easily be extracted using a rod puller fitted with a rod puller extension system (art. no. 04.18.07.05). If the gouge still is partially stuck in the top soil, then it can be removed using a lifting jack (art. no. 05.07.03) with lever and chain ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
to be (less sensitive to torsion). The tapered cutting head also holds the sample better. For this auger roughly the same applications apply as for the ordinary steel gouge augers. This type of auger is particularly suitable for soil mapping because of its small diameter and the cylindrical cutting ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flap gouge auger for depth specific samplings in dry or wet material, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model E, with heavy duty sample ring holder for sampling in hard soils. Standard set for a depth of 2 m. For soil sample rings Ø 53 mm. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The set is very suitable for in addition to exploratory soil augering and sampling inserting monitoring well pipes for groundwater level measurements and for sampling. This compact set can be carried easily in a station car and is easy to use in the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod. In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Drilling a bore hole is often combined with sampling and describing a profile. If both these activities are not necessary during the drilling procedure then drilling can be executed fast and efficient applying the so-called lost cone drilling method. Eijkelkamp Soil & Water developed a manually controlled set using an electrical ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Winches are used for lifting and hoisting activities in the field. They are fixed to one of the legs or to the frame of a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod. In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Casing tube, synthetic (ABS) with steel screw thread sockets, Ø 125 x 108 mm, length 1 m, left hand, coarse round screw thread. Screw thread closes in 2.25 turns and an o-ring seals it for fine sand, weight 6.7 kg. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm. The bi-partite root auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Handle, normal, 60 cm, bay. (incl. coupling ...
-
Manufactured by In-Situ Environmentalbased in USA
The smarTROLL Multiparameter Low-Flow Kit contains everything you need to conduct low-flow groundwater sampling with the smarTROLL Multiparameter Handheld. Low-Flow Sampling equipment is used to direct the flow of water past the sensors of the smarTROLL instrument during purging and low-flow sample tests. The seal between the ...
-
Manufactured by In-Situ Environmentalbased in USA
12 in. by 12 in. base plate for the smarTROLL MP Handheld Low-Flow system. Includes hardware for mounting the flow cell. The Low-Flow Sampling equipment is used to direct the flow of water past the sensors of the smarTROLL Multiparameter Handheld during purging and low-flow sample tests. The seal between the instrument and the flow cell ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you