Sampling Probe Equipment
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
With SysMoG GH2ASBUSTERS, depth-specific gas sampling is carried out with a SysMoG® probe and a winch (to a depth of 1500 m, 3000 m is under development). The system consists of a borehole probe with a chamber into which the gases (dissolved in the groundwater) diffuse. When the gas pressure in the probe has stabilised, the ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mobile calibration system as transfer standard to determine the correction values for losses along the sampling ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Maximum flue gas temperature: 600°C. Ambient operating temperature: -20°C to +80°C. Protection degree: IP65. Filtration chamber volume: 120 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Set incl. 11 pcs stainless steel sampling probes (3,45- 3,81-4,16-4,57-5,0-5,46-5,92-6,71-7,62-8,69-9,9 mm). Sampling probes can be directly connected into SAC-65 sampling cyclone inlet (R3/8") or IPR-500. Set includes also 11 pcs Cu gaskets 17/21x1.5 ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-300 explosion-proof sampling probe is for the explosion-proof occasions. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Can be operated with temperature controller DR- ...
-
Manufactured by Mulmix S.p.a.based in ITALY
The sampling unit for cereals and other granular material is designed to select from each batch of material a homogeneous sample that can be tasted rapidly and with the highest reliability. The sampling probe is powered by a motor reduction gear 0.37 kw (poles). Overall length: 2015 mm Weight: 18 kg. The oil hydraulic circuit is ...
-
Manufactured by Wuhan Tianyu Intelligent Control Technology Co., Ltd.based in CHINA
The gas sampler is easy to operate, with a built-in micro filter, which is suitable for various probes and joints of different specifications. The heated sampling probe heats and transports the sample gas, which is more and more widely ...
-
based in MALAYSIA
Examples of AP29ECO Sampling Probes techniques are integral test in accumulation chamber, clam shell test, direct point sniffing and scanning. Controlled by the Sensistor ISH2000 Hydrogen Leak Detector, it draws a well-defined sample of air and passes it over the built-in hydrogen sensor. It also handles calibration of your entire leak test ...
-
Manufactured by Soclemabased in FRANCE
The GPHV was designed sampling from high velocity gas streams. The thick walled probe, which is machined from a single piece of stainless steel, has a high natural resonant frequency that allows it to withstand the destructive forces of gases flowing at high velocities. TTiis model must be installed with a depressurized ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our isokinetic probes with an oversheath provide additional support to stabilize the probe during sampling operations. The oversheath also allows the addition of a packing gland to achieve a tight seal between the probe and port. Our oversheath probes measure 2 inches in diameter and are used for Method 5 ...
-
Manufactured by Chou Magnetics Co,Ltdbased in CHINA
ChouMag Magnetic Sampling Probes are used for sample inspection. High intensity magnetic sampling probes are ideal for quality control personnel to quickly and easily carry out product purity inspections on any powder, granulate or liquids for ferrous and lightly magnetic ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: Representative continuous gas sampling in processes containing dust and humidity. Installation in Ex-zone 1, 2 or 21, 22. Hazardous gases. Pressurized processes. Extractive gas analysis. Emission (CEMS) and process Monitoring. Removal of dust from the sample gas. ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most applications up to 1g dust/m3 can be integrated. 180mm filters with a larger filter surface are ...
-
Manufactured by AGT-PSG GmbH & Co.KGbased in GERMANY
Largest filter surface on market; Corrosion resistant, made of stainless steel SS316Ti; Comfortable filter change without any tools; Controlled heating to 180°C; No cold spots; Test gas connection as standard; Protective housing for external mounting; Temperature alarm contact; Optionally ...
-
Manufactured by Universal Analyzers - AMETEK, Incbased in USA
The Model 270S is a Heated Stack Filter Assembly consisting of the filter body mounted in an aluminum protective housing. An optional blowback system is provided to allow a blowback to occur on command from a computer, data logger, PLC or external switch mounted in a safe area. A 125 watt heater is mounted on the outside of the filter cavity. The heater holds the temperature of the filter near ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you