We couldn't find any sampling pump equipment suppliers or service providers located in District of Columbia

Here is a list of equipment results with suppliers serving District of Columbia

sampling pump equipment available in District of Columbia

  • Premium

    J.U.M. - Model 2825PD - Compact Compressor or Sample Pump

    The 2825PD is a very compact compressor or sample pump. The two pumping modules are made of 316 Stainless Steel with aluminum heads as a compressor or made from 316S stainless steel. The dual head design provides a high medium flow of approx. 25 liter per minute when configured parallel. Both pump modules can also be used as used as individual ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Compact Compressor or Sample Pump Product line

  • Premium

    J.U.M. - Model 2812D - Compact Sample Pump

    The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Compact Sample Pump Product line

  • Premium

    J.U.M. - Model 2812D-HT - Compact, High Temperature Sample Pump

    The 2812D-HT is a very compact, High Temperature Sample Pump. All parts which come in contact with sample are made of 316 stainless steel to withstand corrosive gasses as they can become present in standard stack gas emission. The drive mechanism has been designed for a very smooth, low vibration, continuous and silent operation. The pump heads ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Compact, High Temperature Sample Pump Product line

  • Premium

    ESC - Model Z-XP Series - Portable Pump

    This series builds on the technology of the Z instruments. These instruments use the same electrochemical sensor and design as the Z series, but Z-XP series employ an internal sampling pump instead of diffusion sampling.

    By Environmental Sensors Company based in Boca Raton, FLORIDA (USA). from Portable Pump Product line

  • Sample Pump

    The Sample Pump assembly has a single head, Teflon lined sample pump mounted in a rugged metal enclosure.The Sample Pump Includes 0.5-10.0 LPM flow meter with stainless steel valve, replaceable inline filter, front panel mounted on/off switch and circuit breaker. The inlet and outlet of the Sample Pump have 1/4' SS compression fittings.

    By Clean Air Engineering, Inc. based in Palatine, ILLINOIS (USA). from Sample Pump Product line

  • AirChek - Model 52 - Sample Pump

    The AirChek® 52, 5 to 3000 ml/min, easy-to-use personal sample pump provides up to 12-hour run times for sampling particulates and gases/vapors. The pump is ideal for use with sorbent tubes, filter cassettes, size-selective samplers, and impingers. UL Listed for intrinsic safety

    By SKC Inc. based in Eighty Four, PENNSYLVANIA (USA). from Sample Pump Product line

  • Sampling Pump

    These pumps can be used for the DM density meters and RM refractometers and are suitable for all applications where the samples to be measured are of a similar nature and no intermediate complete drying of the measuring cell is required.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Sampling Pump Product line

  • Model SP200 - Peristaltic Sampling Pump

    Global Water's SP200 variable speed portable peristaltic pump sampler is ideal for removing samples from shallow wells and surface water, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The manually-operated peristaltic pump can backflush the ...

    By Global Water Instrumentation, Inc. - a Xylem brand based in Gold River, CALIFORNIA (USA). from Peristaltic Sampling Pump Product line

  • Gilian - Model 3500 - 3.5LPM, 5000 - 5LPM - Air Sampling Pumps

    The Gilian® 3500 & 5000 are industry leaders in back-pressure performance, reliability and ease-of-use. These pumps offer flow rates up to 3500 & 5000 cc/min respectively. And thanks to several advanced features, these pumps overcome the main causes of sampling errors – saving you time and money. The air flow display holds ...

    By Sensidyne Industrial Health and Safety based in St. Petersburg, FLORIDA (USA). from Air Sampling Pumps Product line

  • GilAir - Model 3, 5 - Air Sampling Pumps

    The GilAir pumps (GilAir-3 & GilAir-5) have one of the largest user bases of any air sampling pump worldwide. These reliable 3 and 5 liter per minute air sampling pumps have automatic constant flow assuring sampling is maintained within +/- 5% of the initial set point. Setting the flow rate on the GilAir-3 & GilAir-5 is ...

    By Sensidyne Industrial Health and Safety based in St. Petersburg, FLORIDA (USA). from Air Sampling Pumps Product line

  • BUCK BioSlide - Model B1020 230VAC - Compact Sampling Pump

    The BUCK BioSlide Model B1020 Sampling Pump is a compact, lightweight 10-20 LPM controlled flow sampling pump for bioaerosol sampling with BUCK Impaction-Gel (also accommodates generic grease slides ). The easy, full-control keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy calibrations without tools, ...

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Compact Sampling Pump Product line

  • Buck BioAire - Model B520 - Bioaerosol Sampling Pump

    The BUCK BioAire Model B520 Bioaerosol Sampling Pump is a compact, lightweight 5-20 LPM controlled flow sampling pump for bioaerosol sampling with Allergenco-D and Air-O-Cell cassettes. The easy, fullcontrol keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy calibrations without tools, or perform ...

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Bioaerosol Sampling Pump Product line

  • Premium

    PurCon IS - Sample Preparation

    Continuous sample preparation directly in the measuring medium - no external pump required. The perfect addition to the TresCon analysis system.

    By WTW - a xylem brand based in Weilheim, GERMANY. from Sample Preparation Product line

  • Premium

    ENVEA - Model MICA 2M - Sample Handling System Used for Pumping and Conditioning

    Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and analysers.

    By ENVEA based in Poissy, FRANCE. from Sample Handling System Used for Pumping and Conditioning Product line

  • Casella - Model Apex2IS Pro - Personal Sampling Pump

    Whatever media you’re using you can be assured that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling pump has outstanding back pressure capability. There are no more worries about ...

    By Casella based in Kempston, UNITED KINGDOM. from Personal Sampling Pump Product line

  • Model TBP-102 - Gas Sampling Pumps

    The compact Gas Sampling Pump incorporates a Hargraves Miniature Dual Head Pump with a maximum vacuum of 25” Hg and open flow of 6 to 11 lpm. The polyethylene terephthalate (PET) pump is constructed with a silicone valve and neoprene diaphragm. Pumps feature direct read rotameter, non-reversible male and female quick connects, stainless ...

    By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM. from Gas Sampling Pumps Product line

  • Fluid Sampling Pumps

    The fluid sampling pump is designed to draw a vacuum of 27 inches of Hg (Mercury). The patented tube coupling device accepts any size sampling tube (with an outside diameter of 3/16” through 5/16”) without changing the fittings. The sampling tube is inserted through the coupling device until the lower end extends below the top of the ...

    By Tomopal, Inc. based in Sacramento, CALIFORNIA (USA). from Fluid Sampling Pumps Product line

  • Model 180 & 1800 - Sample Pump Units

    A pump unit for applications where portability is required. Each unit consists of a Bennett Pump, a tube bundle (choice of length and materials) and a tube bundle reel. The reel is equipped with all controls for operating the pump. The portable units are completely assembled,tested and shipped ready for use.

    By Bennett Sample Pumps Inc based in Amarillo, TEXAS (USA). from Sample Pump Units Product line

  • Buck LinEair - Model 40 LPM, 230 VAC - Air Sampling Pump

    The BUCK LinEair 40 Sample Pump is a 5 - 35 LPM linear piston air sampling pump with long life motor providing impressive power, compact size and ultra quiet operation and low current drain for a wide range of sampling applications. With the BUCK LinEair 40, you can use filters, PUF samplers, sorbent tubes, charcoal cartridges, cascade impactors, ...

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Air Sampling Pump Product line

  • Gastec - Model 100s - Gas Sampling Pump

    Gastec’s standard GV-100 gas sampling pump is lightweight and rugged. It includes a Thermal Ring for measuring ambient temperature; a flow finish indicator for identifying full and partial pump strokes; the Gastec Handbook containing complete detector tube details; and protective, semi-rigid carrying case.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Gas Sampling Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you