SCADA Equipment In Tennessee
-
Manufactured by High Tide Technologies, LLC.based in USA
The HTT-300 is the most economical HTT unit. It is most commonly used to monitor manholes and lift stations. It is equipped with 4 discrete inputs and 1 optional analog inputs. The typical use for this unit is either a duplex lift station monitor where you can collect starts and run-times for two pump and have two discrete alarms such as High Level and a power fail alarm built in. It is also ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is ...
-
Manufactured by High Tide Technologies, LLC.based in USA
The HTT-4100 is typically used for treatment plant monitoring. The base model comes equipped with 28 discrete inputs, 12 analog inputs, and 8 discrete outputs. Optional modules can be added to increase all three signal types. The HTT-4100 works seamlessly with the High Tide Technologies TelemetryVIEW web ...
-
Manufactured by High Tide Technologies, LLC.based in USA
The HTT-1100 is the most commonly used High Tide Technologies telemetry unit. It is equipped with 8 discrete inputs and 4 analog inputs. Optionally, it can be equipped with an additional 4 analog inputs and/or 4 discrete outputs for control applications. The HTT-1100 also has a built-in power fail monitor and battery backup so that operators can be notified when power is lost and still monitor ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 420-DC or 420-AC provide for a reliable, simple and cost efficient way to automate today’s water systems. A sturdy slow speed 24 VDC motor actuator drive can be installed on a variety of Singer pilots. The motor actuator responds to a 4-20 mA signal, rotating the pilot adjusting screw corresponding to the change in signal. The number of turns is adjustable and may be programmed to suit ...
-
Manufactured by Avantech, Inc.based in USA
Integrating process instruments, PLC s, PC-based control and innovative software can improve and simplify your processes. Our approach to process automation goes beyond normal everyday valves and pumps. By integrating SPC/SQC sampling and inspection systems into the process stream, a process can be continually monitored for variances, ensuring process consistency and plant conditions that are ...
-
Manufactured by High Tide Technologies, LLC.based in USA
The HTT-3100 is equipped for larger pump stations or small treatment plants. It is equipped with 28 discrete inputs, 6 analog inputs, 2 analog outputs, and 8 discrete outputs. The HTT-3100 also has a built-in power fail monitor and battery backup so that operators can be notified when power is lost and still monitor various alarms. The HTT-3100 works seamlessly with the High Tide Technologies ...
-
Manufactured by Mueller Water Productsbased in CANADA
The LCP-TP Level Controller is a single process level controller designed to complement Singer Valve’s Single Solenoid Operated/Override Control Valves and 4-20mA level sensor or High/Low Level Switches. This combination package is ideal for filling any kind of tank that requires filling to a level setpoint, drawing down the tank level to a secondary setpoint and activating the fill cycle ...
-
Manufactured by High Tide Technologies, LLC.based in USA
The HTT-900 is the entry-level sewer lift station or meter monitoring unit. It comes with 12 discrete inputs that can be used to monitor pump run status, alarms, meters and rain gauge pulse counters. The HTT-900 also has a built-in power fail monitor and battery backup so that operators can be notified when power is lost and still monitor various alarms. For lift station monitoring the unit ...
-
Manufactured by Mueller Water Productsbased in CANADA
The MCP-TP Series is a multiple process loop control panel designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the feedback (process variables) transmitters used, which is similar to (but not limited to) combination automatic control valve functions with conventional ...
-
Manufactured by Mueller Water Productsbased in CANADA
The EPC is a single process loop controller designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the process variable (feedback) transmitter used, which includes (but not limited to) common automatic control valve functions with conventional ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SCP-TP Controller is a simplified process controller designed to complement the Dual Solenoid Control Valve. It offers quick and easy configuration for any single process application as well as on/off applications. The SCP-TP is also equipped to be configured to control the Singer 420DC Motor. Range of application is dependent on the process variable (feedback) transmitter used, which ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which ...
-
Manufactured by Primozone Productions ABbased in SWEDEN
The Primozone® System Controller is a sophisticated control unit that allows for safety, monitoring, and control of the complete Primozone ozone water-treatment ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
The PWTech Hybrid Biological Nutrient Removal (HBNR) process is a widely utilized technology for treating wastewater to a very high standard, particularly when stringent nutrients requirements are in force. Combining the performance advantages of continuous flow aerobic/anoxic reactors and the cost-simplicity benefits of sequencing batch reactors (SBRs), the HBNR process offers dependable and ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
Process Wastewater Technologies and Applied Engineering Technologies (AET) have partnered together to develop a fully-automated, patented* treatment shaft process for CSO control systems. The technology provides proper disinfection contact time, vessel flushing, air venting, odor control, surge control, skimming, and settling in a footprint that is less than 15% of a surface storage ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you