Scientific Data Equipment In Canada
-
Manufactured by Campbell Scientific, Inc.based in USA
The COM220 phone modem enables communications between a computer and a Campbell Scientific data logger over a public switched telephone network. A Hayes-compatible modem is required at the computer site. The COM220 connects to the data logger at the field site. Most Campbell Scientific data loggers are ...
-
Manufactured by Campbell Scientific, Inc.based in USA
to the integrated IP functionality of some Campbell Scientific data loggers. The NL201 can also act as a standard TCP serial server, serial client, Modbus TCP/IP gateway, and TLS proxy server for HTTPS and user-defined-port ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SC105 is a CS I/O to RS-232 adapter used to connect a Campbell Scientific data logger to an RS-232 DCE device. Common DCE devices used with the SC105 include cellular modems, radios, and smart serial sensors. The SC105 is compatible with any data logger that has a CS I/O port. Multiple SC105 interfaces can be connected to a single ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The NR-LITE2, manufactured by Kipp & Zonen and cabled for use with Campbell Scientific data loggers, is a rugged net radiometer that measures the energy balance between incoming short-wave and long-wave infrared radiation relative to surface-reflected short-wave and outgoing long-wave infrared radiation. It is directly connected to a ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TE525, manufactured by Texas Electronics, has a 6 in. orifice and measures rainfall in 0.01 in. increments. It is compatible with all Campbell Scientific data loggers, and it is widely used in environmental monitoring ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The GRANITEâ„¢VOLT 116 is an analog input module that allows you to easily expand your Campbell Scientific data acquisition system. The VOLT 116 has 16 differential or 32 single-ended input channels and four excitation channels. It provides two 12 V ports and two switched 12 V ports for powering your peripherals, as well as four switched 5 V ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AM25T 25-Channel Solid State Multiplexer increases the number of thermocouples that you can measure using a Campbell Scientific data logger. The multiplexer interfaces with the data logger and adds terminals so that you can wire additional thermocouples or other low-level voltage output ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW3 is a Type E thermocouple with a 0.003 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW3 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 255-100, manufactured by Novalynx, determines evaporation rate by measuring the changing water level in your evaporation pan. The evaporation gauge produces a resistance output that Campbell Scientific data loggers can monitor. The 255-200 or another standard National Weather Service Class A evaporation pan must be purchased ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW05 is a Type E thermocouple with a 0.0005 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW05 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TE525WS, manufactured by Texas Electronics, is a tipping bucket rain gage that conforms to the National Weather Service recommendation for an 8 in. funnel orifice. It measures rainfall in 0.01 in. increments. This tipping bucket is compatible with all Campbell Scientific data loggers, and it is widely used in environmental ...
-
Manufactured by MetOcean Telematicsbased in CANADA
The iSPHERE is a unique buoy designed for oil spill tracking. Offered as an alternative to the standard ARGOSPHERE drifter, it uses the bi-directional Iridium® satellite system to communicate and to transmit essential scientific ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TB4, manufactured by Hyquest Solutions, is a high-end tipping bucket rain gage that has an 8 in. orifice and measures rainfall in 0.01 in. increments. It is ideal for locations where intense rainfall events may occur. This tipping bucket is compatible with all Campbell Scientific data loggers, and is used in environmental ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TE525MM, manufactured by Texas Electronics, is a tipping bucket rain gage that monitors rainfall in metric rather than US units. It measures in 0.1 mm increments and has a 24.5 cm funnel. This tipping bucket is compatible with all Campbell Scientific data loggers, and is widely used in environmental monitoring ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW1 is a Type E thermocouple with a 0.001 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW1 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS700, manufactured by HS Hyquest Solutions, is a high-end tipping bucket rain gage with an 8 in. orifice and a heavy-duty cast aluminum base. It measures precipitation in 0.01 in. increments. The CS700 is ideal for locations where intense rainfall events may occur. This tipping bucket is compatible with all Campbell Scientific data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 107 is a rugged, accurate probe that measures temperature of air, soil, or water from -35° to +50°C. It easily interfaces with most Campbell Scientific data loggers and can be used in a variety of applications. The 107 consists of a thermistor encapsulated in an epoxy-filled aluminum housing. The housing protects the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS100 measures barometric pressure for the range of 600 to 1100 hPa (mBar). This range equates to from below sea level (as in a mine) up to 12,000 feet above sea level. Designed for use in environmental applications, the CS100 is compatible with all Campbell Scientific data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The ClariVUE™10 is an ISO 7027 compliant, submersible, side-scatter turbidity sensor. It outputs an SDI-12, digitally processed signal that all modern Campbell Scientific data loggers can measure. The side-scatter turbidity measurement can be used as a surrogate for suspended sediment concentration in aquatic ...
-
Manufactured by Sea-Bird Scientific - Veraltobased in USA
HydroCycle is a wet-chemistry sensor engineered to provide scientifically defensible data that lead to better management ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you