scraper bridge Equipment | Environmental XPRT

Vandezande - Scraper Bridges

A scraper bridge is a mechanical construction that is an integral part of a waste water treatment installation. It can be used for transferring precipitated particles to a sludge collector pit or alternatively for depositing floating substances into a scum removal container. There are two types ...

By Vandezande bvba based in Diksmuide, BELGIUM.

Scraper Bridges

We manufacture longitudinal and Rundräumer for various applications, such as secondary clarifiers and sand ...

By Rotaria Energy and Environmental Engineering GmbH based in Ostseebad Rerik, GERMANY. from Components Product line

Model KD15R - Suction Scraper Bridge

Suction scraper bridge type KD 15R for rectangular tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as ...

By Danish Wastewater Equipment A/S (DWE) based in Vejle, DENMARK. from Clarifiers Product line

Travelling Scraper Bridge

Travelling scraper bridge is made to be installed in a rectangular tank. It is suitable to remove grit and ...

By C.M. Sterluti s.r.l. based in San Pietro Vecchio (VI), ITALY. from Products Product line

Jacopa - Clarifier Scraper Bridges

Jacopa’s expertise in sedimentation has produced an extensive range of clarifiers inclusive of, half bridge types (and possibly the largest in the UK installed at Beckton STW, Thames Water). Our standard range of scraper bridges are suitable for tank diameters from 5m up to 45m, in 1m increments. ...

By Jacopa Limited based in West Midlands, UNITED KINGDOM. from Clarification and Sedimentation Product line

Peripheral Scraper Bridge

Peripheral scraper bridge is made to be installed in a circular basin of sedimentation and consists of a pivoting girder fixed at one end on the central column of the tank, and at the other end on a traction carriage. The girder is made of cold bent thick steel and reinforced with welded ...

By C.M. Sterluti s.r.l. based in San Pietro Vecchio (VI), ITALY. from Products Product line

Friulana Costrucioni - Sludge Scraper Bridge

Sludge scraper bridge: Under the effect of the slow and continuous rotation, the sludge scraper bridge conveys the decanted sludge through the sludge scraper blades to a central tank at the bottom of the basin and hence, extracted through systems like immersion pumps, telescopic valve, spillway, etc. The ...

By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rotating Settler Product line

Model KD 15C - Suction Scraper Bridge

Suction scraper bridge type KD 15C is available for circular primary and secondary tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as ...

By Danish Wastewater Equipment A/S (DWE) based in Vejle, DENMARK. from Clarifiers Product line

Coskun - Grit and Grease Scraper Bridges

thefoam on the surface by passing it to the skim removal funnel. The accumulated sludge can be removed withsuction pumps. The bridge feature differs according to the size and geometry ofthe pool. Hot-dip galvanize or AISI 304-316 stainless steel can be used tomanufacture the scraper bridges Scrapers can work ...

By Coşkun Arıtma Sistemleri based in Gebze-Kocaeli, TURKEY. from Mechanical Equipment Manifacturing Product line

Circular Tank Scraper Bridges

Range of robust, rotating scraper systems for installation in primary and secondary settlement tanks. Diameters of up to 40 metres, supplied in half, two-thirds or full-span ...

By Manufactured Equipment, Products & Solutions (MEPS) based in Lancashire, UNITED KINGDOM.

Friulana Costrucioni - Chain Sludge Scraper Bridge

The chain sludge scraper bridge consists of a support structure anchored at the two sides of the tank that support four shafts and the chains, which are fixed to vanes that scrape the bottom and collect the suspended solids. In particular, the four shafts are arranged in rhomboidal section and fixed to the ...

By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rectangular Settler Product line

Friulana Costrucioni - Central Drive Sludge Scraper Bridge

The central drive sludge scraper bridge is a machine fitted with a central shaft with arms and scraper blades that rotate in clockwise direction and thus convey the debris (sludge, etc.) towards the middle of the reinforced concrete tank, from where they are extracted by a system such as immersion pumps, ...

By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rotating Settler Product line

Friulana Costrucioni - Sludge Scraper Bridge with Controlled Extraction

The sludge scraper bridge with controlled extraction is installed on a sedimentation tank with flat and/or inclined bottom. The inlet of the water to be treated and the sludge extraction occur coaxially towards the centre of the tank, through two ...

By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rotating Settler Product line

Model EM17 - Peripheral Drive Scraper Bridge for Circular Tank

The water coming out of the diffusion drum to the sedimentation zone must have a very low kinetic energy in order to guarantee a good separation and settling of the solids. Moreover, the bottom scrapers must have a continuous and logarythmic profile in order to successfully convey the sludge into the central ...

By Ecomacchine S.p.A. based in Grugliasco, ITALY. from Circular Clarifiers Product line

Revolving Bridge Scrapers/ Fixed Bridge Sludge Thickener

The purpose of the scraper; on the surface of the circular foam settling tank and collecting the sludge accumulated in the ...

By BAŞTÜRK MÜHENDİSLİK based in Serdivan, TURKEY.

Passavant - Single or Double Longitudinal Grit Chamber Scraper Bridge and Oil Separator

Single or double longitudinal grit chamber scraper bridge and oil separatora for coarse materials interception channel width: 400÷4.000 ...

By Passavant Impianti Spa based in Novate Milanese (MI), ITALY. from Water Treatment Product line

Rotating Scraper – Half Bridge Type

Full Bridge Rotating Scraper (Clarifier) is designed and used in all sedimentation tanks (primary & secondary sedimentation). In general manner it is mainly used to treat domestic and industrial effluent containing heavy wastes that could rapidly settle and that the slurry can be removed as it is ...

By Tech Universal (UK) Ltd based in Cardiff, UNITED KINGDOM. from Domestic Sewage Product line

Rotating Scraper – Full Bridge Type

Full Bridge Rotating Scraper (Clarifier) is designed and used in all sedimentation tanks (primary & secondary sedimentation). In general manner it is mainly used to treat domestic and industrial effluent containing heavy wastes that could rapidly settle and that the slurry can be removed as it is ...

By Tech Universal (UK) Ltd based in Cardiff, UNITED KINGDOM. from Domestic Sewage Product line

TEMSER - Travelling Bridge Scraper

Travelling Bridges are highly efficient scrapers on grit and grease removal. Bridge operation is Fully Automated with PLC facilities on Local Control for longitudinal bridge movement and independent operation of Grit and Grease scraping arms. Optional Submerged Grit Pump is ...

By TEMSER based in Kad köy, TURKEY. from Scrapers Product line

Tuke & Bell - Rotating Bridge Scrapers

The Tuke & Bell Rotating Bridge Scraper consists of an access bridge with an open-mesh walkway, mounted onto a central rotating bearing. The bridge supports an arrangement of helical scraper blades or alternatively a trailing scraper chain that conveys settled sludge to a central hopper for ...

By Tuke & Bell Ltd based in Wednesbury, UNITED KINGDOM. from Circular Settling Tank Equipment Product line

Subscribe to our eBulletins