We couldn't find any screw pump equipment suppliers or service providers located in Faroe Islands

Here is a list of equipment results with suppliers serving Faroe Islands

screw pump equipment available in Faroe Islands

  • Premium

    ProMinent - Model Spectra - Eccentric Screw Pump

    Capacity range 2.4 – 12,000 l/h, 12 – 3 bar; The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Eccentric Screw Pump Product line

  • Premium

    Landustrie - Screw Pumps

    With a fully automated screw pump selection program the optimum screw pump can be choosen for any particular application.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Screw Pumps Product line

  • Rusch - Model Type RSP - Screw Pump

    Self-priming screw pump, Short design with basic frame and aggregate.

    By Rusch-Pumpen Fabrik GmbH. based in Ruhr, GERMANY. from Screw Pump Product line

  • KRAL - Model Series W - Screw Pumps

    KRAL Screw Pumps for Machine Tool Coolants. For water soluble coolant you will be able to use the advantages of a screw pump. Customer-specific designs are possible.

    By KRAL AG based in Lustenau, AUSTRIA. from Screw Pumps Product line

  • Lamor - Model GTA SS - Screw Pumps

    The newly developed series of GTA pumps manufactured in stainless steel have been especially designed for long-term permanent use on vessels. The stainless steel GTA pumps are surface treated with a mix of of highly protective dirt repellent and hydrophobic coatings to further enhance the superior properties of the acid proof stainless steel ...

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Screw Pumps Product line

  • Model N 50 - Screw Pump

    On of our common model is the N50 pump. This pump has a capacity of 6 – 12 m3/hour. This pump is suitable in a one stage, or two stage model. There can be variation in inlet and outlet diameter. Also the inlet can be made as trough and pumped via a mortar into the eccentric displacement pump. Depending on the viscosity and dry matter of the ...

    By Maris Projects B.V. based in Schijndel, NETHERLANDS. from Screw Pump Product line

  • Model PCXA- Type 3 - Screw Pumps

    3-screw pump, suitable for various types of fluids, ONLY for vertical semi-immersed installation, NO impurities allowed, compliant with regulation API676 IIED.

    By Seim S.r.l. based in Cusago (MI), ITALY. from Screw Pumps Product line

  • Screw Pump

    Its name, the self-priming screw pump of its typical form, which resembles a spindle screw. It is suitable for handling lubricating, non-lubricating or abrasive media.

    By GHS Separationstechnik GmbH based in Landshut, GERMANY. from Screw Pump Product line

  • Leistritz - Model L2NG - Screw Pumps

    Leistritz screw pumps in the L2 range are twin-screw, single-volute, self-priming positive displacement pumps for the low-pressure range. They are used to pump slightly aggressive, slightly abrasive, low to high-viscosity fluids with good to poor lubrication properties.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Screw Pumps Product line

  • Leistritz - Model L2NT - Screw Pumps

    Leistritz screw pumps in the L2 range are twin-screw, single-volute, self-priming positive displacement pumps for the low-pressure range. They are used to pump slightly aggressive, slightly abrasive, low to high-viscosity fluids with good to poor lubrication properties.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Screw Pumps Product line

  • Leistritz - Model L5NG - Screw Pumps

    Leistritz screw pumps in the L5 range are five-screw, single-volute, self-priming displacement pumps for low-pressure duty, suitable for transport of aggressive, light abrasive, low or high-viscosity fluids with good or poor lubricity.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Screw Pumps Product line

  • Model N 10 - N 150 - Screw Pumps

    Beside our standard types like the N50 and N80, we also deliver also many other type of pumps.

    By Maris Projects B.V. based in Schijndel, NETHERLANDS. from Screw Pumps Product line

  • Model PA Type 3 - Screw Pumps

    For hydraulic oils, lubricating oils. Admissible delivery pressure (continuous) = 50 bar at 2900 rpm (30 bar for model PA…0T). Flow rate up to 850 L/min. Motor connection ISO 3019/2. Standard use: Immersed vertical pumps in tanks for filtration and cooling systems or for low pressure auxiliary circuits. Versions available with filter in the ...

    By Seim S.r.l. based in Cusago (MI), ITALY. from Screw Pumps Product line

  • Model N 80 - Screw Pump

    A standard model screwpump, is the N80. This pump has a standard capacity of 7 – 14 m3/hour. This pump is suitable in a one stage, or two stage model. The capacity can be much higher (see graphic attached), but with low capacity, this pump is highly suitable for high viscosity materials. There can be variation in inlet and outlet diameter. ...

    By Maris Projects B.V. based in Schijndel, NETHERLANDS. from Screw Pump Product line

  • Hepta - Model 100, 190-208/380-415 V, 50 Hz - Screw Pumps

    High-performance screw pump with a pumping speed of 110 m3/h. For mains voltage: 190-208/380-415, 50 Hz, 3 ph. Ideal solution for all areas in which oil-free vacuum is required. Lower energy costs thanks to internal compression. For applications in the low and medium vacuum.

    By Vacuum Service based in Roma, ITALY. from Screw Pumps Product line

  • Leistritz - Model L3MG - Screw Pumps

    Leistritz screw pumps in the L3M range are three-spindle, single-volute, self-priming displacement pumps for the medium-pressure range. They are used to transport non-abrasive lubricating fluids.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Screw Pumps Product line

  • Leistritz - Model L3NG - Screw Pumps

    Leistritz screw pumps in the L3N range are three-spindle, single-volute, self-priming displacement pumps for the low-pressure range. They are used to transport non-abrasive lubricating fluids.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Screw Pumps Product line

  • Leistritz - Model L3NX - Screw Pumps

    Leistritz screw pumps in the L3N range are three-spindle, single-volute, self-priming displacement pumps for the low-pressure range. They are used to transport non-abrasive lubricating fluids.

    By LEISTRITZ Pumpen GmbH based in Nürnberg, GERMANY. from Screw Pumps Product line

  • KRAL - Model Series CG - Screw Pumps

    KRAL Screw Pump Series CG. The Highly Efficient Pumps for High Pressures. KRAL CG pumps marry high feed rates and high pressure in a robust design.

    By KRAL AG based in Lustenau, AUSTRIA. from Screw Pumps Product line

  • KRAL - Model Series CL - Screw Pumps

    Also Suitable as a Cartridge Pump for the Larger Series CG. The slim and compact KRAL pump for a variety of industrial applications.

    By KRAL AG based in Lustenau, AUSTRIA. from Screw Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you