Only show results available in Michigan? Ok

scrubber cyclone equipment

  • Premium

    CECO Peerless - Multi-Cyclone Scrubber Centrifugal Separator

    A centrifugal separator uses centrifugal, gravitational, and inertial forces to separate solutions, gas mixtures, or other matter that can be physically parted. Centrifugal separation occurs when a mixture in the machine's chamber is spun very quickly, and heavy materials typically settle differently than lighter ones.

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Separation-Filtration Technologies Product line

  • Premium

    ANDRITZ - Model VDC - Fluid Bed Drying-Cooling System

    Drying and cooling takes place in the product chamber by convective heat and mass transfer only, between the fluidization gas and the product. Two different designs are supplied, as single or as double mass vibrating system depending on the fluid bed size. This type of fluid bed is used for food and feed as well as for chemical products, mainly ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Thermal Systems - Drying Systems Product line

  • Premium

    ANDRITZ - Pulp Flash Drying Plants

    ANDRITZ supplies single equipment for pulp flash drying lines, as well as turnkey plants. A market pulp flash drying plant usually starts at the high density storage tower directly after the bleaching plant of the fiberline. The pulp flash drying plant comprises screening/cleaning, dewatering, fluffing, drying, baling, and finishing operations.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Premium

    ANDRITZ - Model DDC - Fluid Bed Drying-Cooling System

    Drying and cooling take place in the product chamber, only by convective heat and mass transfer between the fluidization gas and the product. Two different designs are available, for normal and high temperature applications.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Belt, Drum, and Fluid Bed Dryers Product line

  • Premium

    ANDRITZ - Model HDC - Fluid Bed Drying-Cooling System

    Drying and cooling combined in a single unit. This type of fluid bed is used for polymers and other temperature-sensitive products, especially of small particle size, mainly for high line capacities. It is characterized by the stationary design of the fluid bed without rotating and vibrating parts, resulting in higher operating availability and ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Belt, Drum, and Fluid Bed Dryers Product line

  • NAPP - Model NAPP/WTP/506 - Wet Scrubbers for Air Pollution and Cyclones To Control Air Pollution

    Air Pollution Control devicesThe following items are commonly used as pollution control devices in industry and transportation. They can either destroy contaminants or remove them from an exhaust stream before it is emitted into the atmosphere.Particulate controlMechanical collectors (dust cyclones, multicyclones)ScrubbersBaffle spray ...

    By National Anti Pollution Projects based in Gurgaon, INDIA.

  • Anderson - Multi Cyclone Separators

    ANDERSON's Muti Cyclone Scrubber is an attractive alternative to our Hi-eF type centrifugal separators.

    By Clark-Reliance Corporation based in Strongsville, OHIO (USA). from Anderson Separators Product line

  • Process Water And Exhaust Purification System

    The mineral wool industry needs individual exhaust cleaning systems with perfect integration of the process water system. This exhaust cleaning systems are strongly related to the environmental limits of harmful substances and the requests of the internal process. PVAG water systems is able to engineer a system of wet scrubber, cyclone, venturi, ...

    By PVAG water systems GmbH based in Jülich, GERMANY.

  • Cyclone Scrubber Solutions

    Cyclone scrubbers can be used as part of an incineration system as a dust particle removal system. A cyclone scrubber must be specifically designed to meet the specific needs of the waste stream and the off gas produced to ensure optimum operation. A cyclone functions through a process called vortex separation, when the rotational effects and ...

    By Addfield Environmental Systems Ltd. based in Staffordshire, UNITED KINGDOM. from Filtration Product line

  • Venturi Scrubbers and Cyclonic Scrubbers

    Venturi scrubbers use high energy impaction of liquid droplets to remove particulate from contaminated air streams. Water or other liquors are directed towards a constriction, or “throat,” where the atomized liquid scrubs the particulate from the air and transfers it to the scrubber liquid droplets. This type of technology is a part of ...

    By AirPol based in Ramsey, NEW JERSEY (USA).

  • airprotech - Dry and Wet Dust Removal Systems

    The types are: Venturi scrubbers. Washing columns- scrubbers. Dust removers - cartridges, sleeves, cyclones.

    By Airprotech based in Magenta, ITALY.

  • D.R. Technology - Particulate Control Systems

    Wet Venturi, Cyclonic, Impingement scrubbers as well as combination systems. Designs are specified to minimize pressure drop and maintenance. We also supply Wet Electrostatic Precipitators for low pressure drop fine particle collection.

    By D.R. Technology, Inc. based in Freehold, NEW JERSEY (USA). from Pollution Control Products Product line

  • Cyclone and Scrubber based System for Coal Fired Furnace

    Ducts & Bends : Ducts and Bends are required to convey flue gases from point of suction to the chimney and connect various equipments like Cyclone, Scrubber, ID Fan and Chimney. Their sizes are based on flue gases volume & temperature. A Damper is usually provided at the suction point.

    By Eros Envirotech Private Ltd. based in Ludhiana, INDIA. from Water Pollution Control Device Product line

  • Model 9000 Series - Mist Removal / Preformed Spray Scrubber

    A major advancement in cyclonic scrubber technology, the Series 9000 Mist Removal | Preformed Spray Scrubber is capable of outperforming venturi scrubbers on an energy cost basis for collection of particulate in the 2 micron and larger size range and simultaneous removal of gaseous pollutants.The Series 9000 Mist | Preformed Spray Scrubber ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Wet Scrubber Product line

  • CycloPlus™ - Cyclone Dry Particulate Collector

    The CycloPlus collector is an advanced cyclone design scrubber that offers high retained solid particulate collection as either a primary particulate device for dust removal or recovery or to act as a precleaning stage ahead of a fabric filter collector or wet scrubber to reduce particulate loadings and to increase fabric filter life or reduce ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Dry Collector Product line

  • Wiser - Scrubbing System

    The system and devices of Wiser-scrubbing have been developed thanks to research and development over a period of more than 25 years across several different industrial sectors. The major technical solutions and components are internationally patented and the Wiser-scrubbing system contains the following devices: cyclone, interface scrubber, ...

    By Wiser Oy Ltd. based in Kerava, FINLAND. from Gas Purifications Product line

  • Model Cyclone S510 - Heavy Duty Floor Scrubber/ Sander

    This is a heavy duty workhorse that not only weighs more, but has a stronger motor to drive and sustain the increased weight. The Cyclone S510 does almost everything that regular scrubbers do, only faster. This is due to the simple principle that more pressure produces better and quicker cleaning results.

    By Klenco (S) Pte Ltd based in Singapore, SINGAPORE.

  • K-CAST - Monolithic Ceramic Lining System

    K-CAST is applied by trowel or by casting to provide a highly flexible solution to a wide variety of abrasion induced problems. The material offers excellent heat resistance as well as good impact and sliding induced abrasion resistance.

    By Kingfisher Industrial based in Cradley Heath, UNITED KINGDOM. from Ceramics Product line

  • Tailor-Made Drying Plants

    COMESSA constantly works to meet the needs of its clients by proposing totally tailor-made equipment meeting the strict demands of their specifications (process environment, compliance with directives and norms, energy optimisation, etc), at the same time observing the constraints of cost, quality and deadline. The scope of our services ranges ...

    By Comessa S.A. based in Strasbourg, FRANCE.

  • Fuel Gas Scrubber

    Scrubber or Knock-out (KO) drum or mist eliminators are used to remove the entrained liquid droplets and slugs from vapor stream. It assists in removing free liquids present with incoming gas and helps prevent overloading of downstream final filter elements. Bigger droplets are primarily collected by means of inertial impaction whereby the target ...

    By Gaumer Process based in Houston, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you