Scum Baffle Equipment
-
Manufactured by HST Systemtechnik GmbH & Co. KGbased in GERMANY
The state-of-the-art standard-solution for keeping floating materials as a follow-on solution to the fixed baffle, ideal for an upgrade. The baffle is used for holding floating materials at discharge equipment and thus ensures that the discharge of paper, hygiene articles, waste and other floating materials is reduced and prevented as ...
-
Manufactured by NEFCO - part of North American Filtration Family of Companiesbased in USA
Weirs and scum baffles are the ever-present nuts and bolts of the treatment plant, where the versatility and durability of fiberglass make it the material of choice for this ...
-
Manufactured by Fiberglass Fabricators, Inc.based in USA
FFI manufactures high quality matched-die-molded weirs and scum baffles per ANSI/AWWA F102-07. While this type of equipment is often seen as a commodity within the water and wastewater industries, there are some low quality products and inefficient designs on the market that can result in significant repair/replacement costs. Our ...
-
Manufactured by Edgengbased in USA
EDGENG produces wide range of Weirs and Scum baffles for Water and Waste water treatment facilities. Weir Plates - Also referred as weir plates, finger weirs, and serpentine weirs. All our Weir products areclassified for water & waste water treatment facilities (NSF 61 Potable Water Applications). We supply Custom Molded Products, including ...
-
Manufactured by Access Industrial, Inc.based in CANADA
Weirs in water and wastewater treatment plants are used to regulate the inflow of water into launders or troughs. They control inflow with their elevation. The weirs are available with rectangular and V-shaped notches. Both are used to regulate the flow rate. Access Industrial makes weirs out of FRP. They are supplied as a kit. They come complete with 316 stainless steel anchors, FRP washers and ...
-
Manufactured by BIOGEST AGbased in GERMANY
Floating scum baffle for solid retention of floating matters at stormwater overflows and CSO outlets. The vertical or radial floating baffles are suitable for strongly fluctuating water levels or high overflow levels as if moves with the water level up and down. The baffle will be produced in solid stainless ...
-
Manufactured by Enduro Compositesbased in USA
Performing basic tasks for treatment operations, weirs and scum baffles must be high strength and corrosion resistant materials able to withstand harsh conditions. Delivering long, high quality service, fiberglass weirs and scum baffles, manufactured by Enduro Composites, are ideal, cost effective materials for these ...
-
Manufactured by Glass-Steel, Inc.based in USA
General: All flow control weir shall be produced from fiberglass reinforced isophthalic polyester resins. Weirs may be v-notched, square notched, straight flat edge, or straight beveled edge. V-Notch weirs shall have evenly spaced notches throughout the length of the weir except at the splice joint. Scum baffles, scum baffle ...
-
Manufactured by NEFCO - part of North American Filtration Family of Companiesbased in USA
Stronger than Ever: NEFCO offers complete Effluent Trough Systems that include weirs, scum baffles, drop boxes and stainless steel, galvanized steel or FRP trough supports, as well as one-of-a-kind troughs for unique treatment plant applications. ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo® Submerged Effluent Launder (SEL) uses a simple, innovative design that eliminates the need for launder covers or algae cleaning systems, weir, scum baffle and density current baffle. The 5-in-1 design replaces the need to operate and maintain multiple components minimizing equipment and maintenance costs and significantly ...
-
Manufactured by Smith & Loveless Inc.based in USA
Your local Smith & Loveless Representative and the Smith & Loveless Retrofit Team can assist you, no matter who the original equipment provider. You can decide to retrofit something as simple as a skimmer arm to an all new skimmer system, clarifier drive, effluent weir, scum baffle for your clarifier. They’ll work with you ...
-
Manufactured by Glass-Steel, Inc.based in USA
to cover only the trough areas on the clarifiers, circular or rectangular. Clarifier partial covers generally have integral scum baffles, which are partially submerged to seal off the trough ...
-
Manufactured by H+R Environmental ENG`G. Co., Ltd.based in TAIWAN
baffle, overflow weir, scum skimmer, scum box and ...
-
Manufactured by Glass-Steel, Inc.based in USA
to cover only the trough areas on the clarifiers, circular or rectangular. Clarifier partial covers generally have integral scum baffles, which are partially submerged to seal off the trough ...
-
Manufactured by Reliablebased in UNITED KINGDOM
Relinea’s Diffusion Drums are available in diameters up to 10m and a variety of depths. Deeper units would be made up of multiple tiers, bolted together. GRP Diffusion Drums can come with incorporated steel hangers and stiffening ribs. Scum doors and baffles can also be ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The CoverSweep launder covers eliminate problems associated with excess algal growth in clarifier launders. The CoverSweep system is a series of interlocking fibreglass or stainless steel hatches allowing access to the entire trough if required, yet all the while blocking 100% of sunlight across the launder trough, effluent weirs and scum ...
-
Manufactured by Northcoast Valve & Gate, Inc.based in USA
Slip Tubes: The valve slip tube shall be of seamless brass, stainless steel or PVC with a minimum wall thickness of 1/8' to prevent corrosion and to ensure proper operation at all times and arranged to slide inside of the sludge draw-off pipe as shown on the drawings. The valve shall have two V-notched weirs located 180 degrees ...
-
Manufactured by Molded Fiber Glass Water Treatment Products (MFG)based in USA
Weir plates are used to control the flow of water into the launder or trough. Our fiberglass weir plates are match metal die molded and fabricated with a flat crest, V-notch or square notch. Sizes up to 20’ long and four feet high ...
-
Manufactured by Danish Wastewater Equipment A/S (DWE)based in DENMARK
The adjustable overflow weir model KD 34 is designed for controlling the inlet volume in inlet structures and distributor structures. It may also be used in outlet structures and in sand traps to control the water level and in grease traps to remove grease from the surface of the water. The adjustable overflow weir is placed between two side plates. Rubber sealing strips ensure that the weir fits ...
-
Manufactured by Luoyang Longzhong Heavy Machinery Co., Ltd.based in CHINA
water is discharged from the overflow weir around the upper end of the tank. The overflow port is provided with a scum filter device and a baffle to ensure the effluent water quality, the underflow concentration is up to 70%, and the treatment capacity is 3-8 times higher than that of the conventional concentrator. Capacity 50t ~ 300t per ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you