We couldn't find any sealing sleeve equipment suppliers or service providers located in Saskatchewan

Here is a list of equipment results with suppliers serving Saskatchewan

sealing sleeve equipment available in Saskatchewan

  • Premium

    Proco - Model Series 450 - Rubber Navy Sleeve Type Connectors

    The Proco Series 450 Rubber Navy Sleeve Type Connectors are constructed of neoprene rubber, and reinforced with impregnated woven nylon. Sealing beads are molded on the interior of the sleeve to provide extra sealing action for the clamping area. Internal reinforcing rings prevent deformation of the connector during surges or temporary negative ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Navy Sleeve Type Connectors Product line

  • Premium

    Procon - Model Series 190-D - Rubber Navy Sleeve Type Pipe Connector

    The Proco Series 190-D Rubber Navy Sleeve Type Pipe Connector is constructed of neoprene rubber, are reinforced with impregnated woven nylon and come with an aluminized glass outer cover (meets Mil-E-15330 Class B specifications). Sealing beads are molded on the interior of the sleeve to provide extra sealing action for the clamping area. Internal ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Navy Sleeve Type Pipe Connector Product line

  • INNERLYNX - Penetration Seals

    INNERLYNX forms a mechanical seal between pipes going through walls, floors, vaults, tanks and pipeline casings. Besides being designed to form a hydrostatic seal of up to 40 PSIG and up to 96 feet of head pressure, INNERLYNX helps absorb vibrations, shocks, and sound waves. Being non-conductive, INNERLYNX electrically insulates the inner carrier ...

    By Advance Products & Systems, Inc. based in Scott, LOUISIANA (USA).

  • EndSealer - Sleeves

    Link-Pipe EndSealer sleeves have been used to restore the liner end to its proper shape and to permanently seal any infiltration that may seep in from the small space between the liner and the host pipe.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA).

  • Gas Sealer - Sleeve System

    Gas Sealer Sleeve provides long-term seal of leaks in 4' to 54' diameter gas mains. The sleeves are installed internally covering joints, cracks and areas of corrosion.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA).

  • Curaflex Nova - Model Uno - Multi Sealing Gasket Insert

    Against pressing water / non-pressing water.gasket insert to seal pipes and cables.for use in pipe sleeves or core bores.Or in existing waterproof concrete walls.High flexibility in the NB 100 and NB 200 range of pipe sleeves / core-bore

    By DOYMA GmbH & Co. based in Oyten, GERMANY. from Multi Sealing Gasket Insert Product line

  • SKF - Speedi-Sleeve

    This thin-walled sleeve [0,28 mm (0.011 in.)], developed by SKF, is simply pushed in position over the worn area, providing a counterface surface that is optimized for radial shaft seals. There is no shaft disassembly or machining involved and costly downtime is minimized. Since the same sized seal as the original can be used, there is ...

    By SKF based in Göteborg, SWEDEN. from Speedi-Sleeve Product line

  • Curaflex Nova - Model Senso - Sealing Gasket Insert

    Against pressing water / non-pressing water to seal flexible pre-insulated pipes and cable ducts for use in pipe sleeves and core bores   waterproof concrete walls  ideal for media pipes in the range NB 75mm to NB 140mm

    By DOYMA GmbH & Co. based in Oyten, GERMANY. from Sealing Gasket Insert Product line

  • Model HVP, KHVP, VVP, PVVP - Screw – Spindle Pumps

    Screw – spindle pumps belong into the group of volumetric pumps. The main working elements of the pump are three screw (helical) spindles (with special profile) and sleeve (casing). Screw spindle pumps can be compared with gear that have big screw length of his teeth or with piston pump which indefinite number of pistons. Pumps are made in ...

    By MZT Pumpi based in Skopje, MACEDONIA. from Screw – Spindle Pumps Product line

  • Sleeve Wrapper for 4-side Seal

    These model machines are custom made system for packaging of products with thick shrink films with all sides sealing. The machine is an automatic machine in process, with automatic conveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the side ...

    By Canadian Crystalline based in Chennai,, INDIA. from Sleeve Wrapper for 4-side Seal Product line

  • PSI - Wall Sleeves

    When penetrating steel, cast iron, copper or plastic pipes through walls, ceilings or floors, PSI wall sleeves are the best method to create a perfect hole inside the wall and provide best conditions for a seal to work.

    By PSI Products GmbH based in Mössingen, GERMANY. from Wall Sleeves Product line

  • ZGXH - Model SPV API 01 Hits: 8 - Sleeved Soft Sealing Plug Valves

    Sleeved Plug Valves: API 599, API 6D, PTFE, Soft Sealing, Carbon, Stainless, Alloy Steel, BW, Flanged End, Class 150 300, 1/2 - 14 Inch, or as required.

  • Rice Plidco - Clamp Sleeve

    PLIDCO Clamp+Sleeves can be used to couple pipe, seal pipe leaks and reinforce badly damaged pipe. PLIDCO Clamp+Sleeves are designed to grip the outside wall of a pipe to counteract extraordinary end-pull and unusual axial stresses, often encountered in off-shore installations. PLIDCO Clamp+Sleeves are available in any size, length and working ...

    By Rice Engineering & Operating Ltd. based in Edmonton, ALBERTA (CANADA). from Clamp Sleeve Product line

  • Simsite - Metallic Shaft Sleeves

    There is no reason to use metallic shaft sleeves when you can use SIMSITE Structural Composite Sleeves, which not only protects the shaft, but they are light weight, and seal better against the O-rings of the mechanical seals.

    By Sims Pump Valve Company, Inc. (SIMS) based in Hoboken, NEW JERSEY (USA).

  • Sleeve Wrapper Machine

    These model machines are custom made system for packaging of products with Thick Shrink Films with all sides sealing. The machine is an automatic machine in process, with automatic coveying of the product, sealing, and heat shrinkage. The product to be packed will be sealed in first wrapping unit, and then advance to second stage where the side of ...

    By Canadian Crystalline based in Chennai,, INDIA. from Sleeve Wrapper Machine Product line

  • COMPAKT - Seals Made Sealing System

    The COMPAKT Design Seals Made sealing system is specially engineered to unique construction site challenges. It provides excellent sealing performance in wall openings for gas, water and sewage pipes, and various types of cables. The COMPAKT seal is a pressure-tight system. The COMPAKT Special Design Seals system fits to eccentric pipe dimensions ...

    By GPT, a division of EnPro Industries based in Wheat Ridge,, COLORADO (USA). from Seals Made Sealing System Product line

  • Jacketed Hydro Seal

    Hydro Seal (Jacketed) is an internal repair sleeve designed for potable water mains and pressure pipe to repair leaking joints and holes. All sleeve components are FDA or NSF61 approved.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Jacketed Hydro Seal Product line

  • Model Series 5400 - Sleeved Plug Valves

    J Flow Controls’ sleeved plug valves feature the state-of-the-art in PTFE fluorocarbon seats design. With the structure of double sealing grooves with sealing rings, the high integrity bubble tight seal is provided both inline and to atmosphere. The sleeved plug valve, with working pressure ranges between -20°F and 356°F, are ...

    By J Flow Controls based in Cincinnati, OHIO (USA). from Sleeved Plug Valves Product line

  • High Pressure Sleeve

    High Pressure Sleeves are designed for high pressure ANSI 300 applications up to 720 psi. The High Pressure Sleeve features stronger fabric reinforcement and thicker construction compared to a Standard Sleeve. The face flanges are equipped with integrated o-ring seals to ensure a tight seal under high pressure applications.

    By Red Valve Company based in Carnegie, PENNSYLVANIA (USA). from High Pressure Sleeve Product line

  • Straub - Model CLAMP One-Piece - Non-Axial Restraint Pipe Coupling

    Axially flexible repair clamp for pipes of all materials. Diameter 44.0 to 330.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. All diameters and designs available can be obtained from the technical manual.

    By Straub Werke AG based in Wangs, SWITZERLAND. from Non-Axial Restraint Pipe Coupling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you