Sealing Sleeve Equipment
-
Manufactured by SuZhou KoSa Environmental Protection Co., Ltd.based in CHINA
Our 810T double-sealed sleeve control valve uses sleeve-oriented, pressure-balanced spool. Compared with 810D series, this series of control valves are sleeve double sealing structure mainly used in the occasion of low leakage requirements, because the two sealing surfaces of double ...
-
Manufactured by Waterline Renewal Technologies.based in USA
The Insignia End Seal Sleeve is a seamlessly molded end seal that provides a large sealing surface guaranteeing a uniform water-tight seal. The Insignia End Seal Sleeve provides the following advantages over other less precise hydrophilic sealing ...
-
Manufactured by Joy Pack India Pvt. Ltdbased in INDIA
Shrink sleeve sealing machine is an electrically enabled Shrink-wrapping machine, is automatic machine, which works at a speed of 30-45 PPM depending on Motor Capacity. It is generally made of mild steel and has a finned heater. Available in the brand Joy Pack India, the shrink sleeve sealing machine require 20 minutes to cool. ...
-
Manufactured by Zhejiang Xinhai Valve Manufacturing Co., Ltd.based in CHINA
Sleeved Plug Valves: API 599, API 6D, PTFE, Soft Sealing, Carbon, Stainless, Alloy Steel, BW, Flanged End, Class 150 300, 1/2 - 14 Inch, or as ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
There are almost no limits to the size and length of inflatable sealing rubber sleeves. Even large calibre boreholes or microtunnels can be isolated with the help of packer systems. For in-situ tests on a large scale, Solexperts Mega-Packer systems are now used up to 1000 mm in ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the ...
-
Manufactured by Straub Werke AGbased in SWITZERLAND
Diameter 26.9 to 711.2 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. Various coupling sizes also available with FPM/FKM sealing sleeves (Temperature range: -20°C to 180°C). Various coupling sizes also ...
-
Manufactured by Straub Werke AGbased in SWITZERLAND
Axially flexible pipe coupling for pipes of all materials. Diameter 219.1 to 4064.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. Various coupling sizes also available with FPM/FKM sealing sleeves (Temperature ...
-
Manufactured by Straub Werke AGbased in SWITZERLAND
For use wherever fire protection is required by law. Diameter 30.0 to 457.2 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. Various coupling sizes also available with H-NBR sealing sleeves (Temperature range: ...
-
Manufactured by Rennsteig Tools, Inc.based in USA
Crimp System Tool for crimping of MiniSeal Splices/Environmental Splices (barrel and a separate, heat-shrinkable, transparent sealing sleeve). This tool is comparable with ...
-
Manufactured by Straub Werke AGbased in SWITZERLAND
Wide pipe coupling for the restoration and repair of metal pipes in the upper pressure and diameter range. Diameter 323.9 to 4064.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM sealing sleeves are used by default. All diameters and designs available plus accessories (strip inserts, ...
-
Manufactured by Straub Werke AGbased in SWITZERLAND
Axially flexible repair clamp for pipes of all materials. Diameter 44.0 to 330.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. All diameters and designs available can be obtained from the technical ...
-
Manufactured by Straub Werke AGbased in SWITZERLAND
Pull out resistant pipe coupling for transitions from plastic to metal piping. Diameter 38.0/40.0 to 159.0/160.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. All diameters and designs available plus accessories (strip inserts, stiffening ...
-
based in INDIA
to the sleeve of the air operated Pinch Valve. This specific, lipped fold pattern in the Air operated Pinch Valves ensures the complete sealing of the product flow. Even large solids are enclosed by the sleeve in the air operated Pinch Valves and are thus tightly sealed. Sleeve materials and connection options. ...
-
Manufactured by Ningbo Donglian Mechanical Seal Co.,Ltd.based in CHINA
A self-contained unit consisting of a sleeve,seal and a gland plate is called cartridge mechanical seal or cartridge seal.The plastic impeller in the cartridge seals rotates to make the fluids move in the same directions and help to prevent temperature from ...
-
Manufactured by JCM Industries, Inc.based in USA
A special repair sleeve for sealing over split or leaking cast iron bells, A/C couplings and welded couplings. Sizes 4" and ...
-
Manufactured by American Vacuum Companybased in USA
specific needs. Custom designs can include materials such as galvanized zinc, and include join sealing, shrink sleeves and inlet valves placed specifically where you need them to best suit your operation. ...
-
Manufactured by Guangdong Sindaron Packing Technology Co., LTDbased in CHINA
Automatic sleeve sealing and shrinking machine GPL-6030AH+GPS-6040 is a automatic PE film shrink packaging machine, which is suitable for the combination of products without bottom support automatically shrink ...
-
Manufactured by Ultra Check, Inc.based in USA
There are several variations of Ultra Check Safe Sleeves and they are all special designed and custom built to the customer's specifications: Our Ladder / Gauge Pole Combination Sleeve/Seals (Ladder Seal) or Ladder Style Safe Sleeve (two-pole) Has an Aluminum or SS Slide Plate with a Buna-N or Viton Well Gasket ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
are the most wear parts for the slurry pumps on the site, Slurry pump spare parts mainly include impellers, liners, seals, shaft sleeves, and bearing assembly etc. A lot of Tobee’s user’s use Slurry pumps in dealing with the OEM, The users are constantly faced with high costs, slow delivery times and bad customer service, so Tobee started to supply ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you