sealing sleeve equipment in Canada

  • EndSealer - Sleeves

    Link-Pipe EndSealer sleeves have been used to restore the liner end to its proper shape and to permanently seal any infiltration that may seep in from the small space between the liner and the host pipe.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA).

  • Gas Sealer - Sleeve System

    Gas Sealer Sleeve provides long-term seal of leaks in 4' to 54' diameter gas mains. The sleeves are installed internally covering joints, cracks and areas of corrosion.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA).

  • Rice Plidco - Clamp Sleeve

    PLIDCO Clamp+Sleeves can be used to couple pipe, seal pipe leaks and reinforce badly damaged pipe. PLIDCO Clamp+Sleeves are designed to grip the outside wall of a pipe to counteract extraordinary end-pull and unusual axial stresses, often encountered in off-shore installations. PLIDCO Clamp+Sleeves are available in any size, length and working ...

    By Rice Engineering & Operating Ltd. based in Edmonton, ALBERTA (CANADA). from Clamp Sleeve Product line

  • Jacketed Hydro Seal

    Hydro Seal (Jacketed) is an internal repair sleeve designed for potable water mains and pressure pipe to repair leaking joints and holes. All sleeve components are FDA or NSF61 approved.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Jacketed Hydro Seal Product line

  • Straub - Model CLAMP One-Piece - Non-Axial Restraint Pipe Coupling

    Axially flexible repair clamp for pipes of all materials. Diameter 44.0 to 330.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. All diameters and designs available can be obtained from the technical manual.

    By Straub Werke AG Office in Mississauga, ONTARIO (CANADA). from Non-Axial Restraint Pipe Coupling Product line

  • Gas Sealer Seal

    Link-Pipe Inc. has available Gas Sealer Sleeves to seal cast iron and low pressure mains. Gas Sealer Sleeve was jointly developed by Link-Pipe Inc. with Consolidated Edison, KeySpan Energy (prev. Brooklyn Union/Lilco) and NYGAS.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Gas Sealer Seal Product line

  • FluoroSeal - Sleeved Plug Valves

    FluoroSeal Non-Lubricated, Sleeved Plug Valves incorporate state-of-the-art PTFE fluorocarbon seat design. With little required maintenance and trouble-free operation, a high integrity bubble-tight seal is provided both in-line and to atmosphere. The engineered design features contributing to the superiority of our product are described as a ...

    By FluoroSeal Inc. based in Lachine, QUEBEC (CANADA). from Sleeved Plug Valves Product line

  • Straub - Model GRIP-L - Pull Out Resistant Pipe Coupling for All Metal Pipes

    Diameter 26.9 to 711.2 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. Various coupling sizes also available with FPM/FKM sealing sleeves (Temperature range: -20°C to 180°C). Various coupling sizes also available with H-NBR sealing sleeves (Temperature ...

    By Straub Werke AG Office in Mississauga, ONTARIO (CANADA). from Pull Out Resistant Pipe Coupling for All Metal Pipes Product line

  • Jacketed Reinforced Hydro Seal

    Hydro Seal (Jacketed Reinforced) is an internal repair sleeve designed for potable water mains and pressure pipe to repair leaking joints and holes. All sleeve components are FDA or NSF61 approved.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Jacketed Reinforced Hydro Seal Product line

  • Straub - Model Metal-Grip FF - Axial Restraint Pipe Coupling

    For use wherever fire protection is required by law. Diameter 30.0 to 457.2 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. Various coupling sizes also available with H-NBR sealing sleeves (Temperature range: -20°C to 125°C). All diameters and designs ...

    By Straub Werke AG Office in Mississauga, ONTARIO (CANADA). from Axial Restraint Pipe Coupling Product line

  • Straub - Model FLEX 3 - Axially Flexible Pipe Coupling for Pipes of All Materials

    Axially flexible pipe coupling for pipes of all materials. Diameter 219.1 to 4064.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. Various coupling sizes also available with FPM/FKM sealing sleeves (Temperature range: -20°C to 180°C). All diameters and ...

    By Straub Werke AG Office in Mississauga, ONTARIO (CANADA). from Axially Flexible Pipe Coupling for Pipes of All Materials Product line

  • Straub - Model FLEX 4 - Non-Axial Restraint Pipe Coupling

    Wide pipe coupling for the restoration and repair of metal pipes in the upper pressure and diameter range. Diameter 323.9 to 4064.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM sealing sleeves are used by default. All diameters and designs available plus accessories (strip inserts, stiffening rings, ...

    By Straub Werke AG Office in Mississauga, ONTARIO (CANADA). from Non-Axial Restraint Pipe Coupling Product line

  • Straub - Model Combi-Grip - Axial Restraint Pipe Coupling

    Pull out resistant pipe coupling for transitions from plastic to metal piping. Diameter 38.0/40.0 to 159.0/160.0 mm. The temperature ranges indicated are based on the use of EPDM sealing sleeves. EPDM and NBR sealing sleeves are used by default. All diameters and designs available plus accessories (strip inserts, stiffening rings, fitting pliers, ...

    By Straub Werke AG Office in Mississauga, ONTARIO (CANADA). from Axial Restraint Pipe Coupling Product line

  • Fugesco - Seal Air Control Panel

    The seal air control panel is designed to regulate the air pressure into the inflatable seal.  Air is injected into the inflatable seal, that inflates and seals against the stationary shaft/ sleeve while mechanical seals are being serviced, thereby eliminating the necessity to dewater the turbine. After service is completed, before unit ...

    By Fugesco Inc. based in Pointe-Claire, QUEBEC (CANADA).

  • Model 1900 Series - Close Coupled In Line Pumps

    The Taco 1900 Series Close-Coupled In-Line Pumps are designed to be energy efficient and fit anywhere in the piping layout. The 1900 Series is self supported by the piping and can be installed horizontally or vertically. The pump and sealed ball bearing motor are maintenance free. Rear pull-out design and standard motor simplify servicing and a ...

    By Taco Inc Office in Milton, ONTARIO (CANADA). from Close Coupled In Line Pumps Product line

  • Slurry Flanged Knife Gate Valve (SKF)

    Slurry Flanged Knife Gate Valve (SKF)is designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept and it contains only three service parts: ring sleeves, upper seal and the valve gate

    By Flowrox Oy Distributor in QUEBEC (CANADA). from Slurry Flanged Knife Gate Valve (SKF) Product line

  • Slurry Wafer Knife Gate Valve (SKW)

    Slurry Wafer Knife Gate Valve (SKW) is designed for heavy duty purposes to isolate flow, even in the most demanding process conditions. The complete valve is built around an ease of maintenance concept and it contains only three service parts: ring sleeves, upper seal and the valve gate

    By Flowrox Oy Distributor in QUEBEC (CANADA). from Slurry Wafer Knife Gate Valve (SKW) Product line

  • Model 24″ to 144″ - Collapsible Mainline Packers for Pipe

    The Collapsible Mainline Packers, for pipe 24″ & up, can be dismantled for introduction through accesses as small as 21” in diameter and easily re-assembled. A soft natural rubber sleeve, covering the two end bladders, secured to the supporting shell, provides a non-stick surface and a superior seal against rough surfaces.

    By Logiball Inc. based in Quebec, QUEBEC (CANADA). from Collapsible Mainline Packers for Pipe Product line

  • Model BSE - Belt Driven Agitator

    PMSL’s expertise in reliability and efficiency, with a belt drive. Goodyear Eagle PD belt transmission - herringbone belt drive provides positive engagement for maximum efficiency, Lubricated for life deep groove ball bearings - long life, no maintenance, PMSL positive shutoff - no leaks, easy seal maintenance, Multiple seal options - ...

    By Philadelphia Mixing Solutions, Ltd Distributor in ONTARIO (CANADA). from Belt Driven Agitator Product line

  • Model CMP - Elliptical Mainline Packer

    The Elliptical Mainline Injection Packers are custom made for the exact pipe dimensions & the available access. A soft natural rubber sleeve, covering the two end bladders, provides a non-stick surface and a superior seal against rough surfaces.  The Elliptical packer is equiped with a localized sensor & two chemical ports protected ...

    By Logiball Inc. based in Quebec, QUEBEC (CANADA). from Elliptical Mainline Packer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you