Sealing System Equipment In Europe
-
Manufactured by Amex Sanivarbased in GERMANY
The AMEX-10 liner end seal comprises of an elastic rubber seal and high-strength stainless steel tension band (technique according to AMEX-10 MONO seal). The sealing seal can bridge differences in the diameter between liner and old pipe or between different pipe diameters. There is an extra and specially ...
-
Manufactured by Geochemie GmbHbased in GERMANY
The TUBOGEL flooding process is a two-component –sealing system, which Geochemie Sanierungssysteme GmbH successfully uses since several years for sewer rehabilitation without digging. This method guarantees reliable and long-lasting sealing of pipe systems even if they are inaccessible or deeply angled, and expensive ...
-
Manufactured by Amex Sanivarbased in GERMANY
. The VARIO system always ends with a MONO seal in widths between 260 mm and 500 mm. The possibility of combination with all components of the AMEX-10 leads to a high flexibility in ...
-
Manufactured by Amex Sanivarbased in GERMANY
The AMEX SPEED is a seal cast made from corrosion free stainless steel (quality 1.4404). The outside is covered form-locked by an elastic EPDM rubber seal. The AMEX SPEED is pressed onto the inner pipe wall purely mechanical by an air operated packer. The built in locking device guarantees a permanent expanded position of the stainless steel ...
-
Manufactured by PXL Industriesbased in FRANCE
PXL SEALS specializes in sealing systems for energy markets where performance, downtime, technical and economic considerations play a large ...
-
Manufactured by Amex Sanivarbased in GERMANY
The AMEX-10 MONO seal is made of an elastic rubber seal and high-strength stainless steel tension bands in the respective steel quality (1.4404/1.4571 for sewage, 1.4307 for potable water, 1.4462 for sea water). The sealing function is manually realised by application of radial tension forces via the tension ...
-
Manufactured by Trelleborg Pipe Seals Duisburg GmbHbased in GERMANY
The most widely used flexible connector in sanitary sewer applications throughout the world. Most widely used flexible connector. Patented “Waveband” technology. No proprietary installation ...
-
Manufactured by Trelleborg Pipe Seals Duisburg GmbHbased in GERMANY
The new 206 Series Connector is designed with an Allen Head Wedge Bolt for easier installation of the connector into the ...
-
Manufactured by DS Dichtungstechnik GmbHbased in GERMANY
DS BL-T is a sealing ring made from elastomers with dense structure for the DS BL-T plug-in socket, a connection for concrete pipes and reinforced concrete pipes according to DIN EN 1916 and DIN V 1201, whereby the seal is firmly embedded in the socket during manufacture of the ...
-
Manufactured by Unisense A/Sbased in DENMARK
Sealed system to measure O2, H2, H2S, N2O, NO, pH, Redox, and temperature metabolism. The MicroRespiration System is an excellent tool to measure minute analyte changes in closed chambers. This could be respiration rates of phyloplankton, H2S production in macrophages, or pH changes in bacterial ...
-
Manufactured by Lampe GmbHbased in GERMANY
LAMPE KAS Sewer Sealing Systems – "The Better Gate Valve" for Hazardous Liquid Control and Fire-Fighting Water Retention. The pneumatic alternative to mechanical slide valves, gate valves and butterfly valves for environmental protection and retention of fire-fighting ...
-
Manufactured by Trelleborg Pipe Seals Duisburg GmbHbased in GERMANY
The 706 Series Connector acts as the inner mandrel - eliminating the need to go inside the manhole after forming is ...
-
Manufactured by John Crane Corporatebased in USA
Gas Seal System for Non-contacting Gas Seal and Separation Seals for Turbo Compressors. Expertise in the design, production and installation of gas seals is complemented by the ability to provide a comprehensive range of John Crane gas seal support, monitoring and control ...
-
Manufactured by DS Dichtungstechnik GmbHbased in GERMANY
DS BL-R is a sealing ring made from elastomers with dense structure for the DS BL-R plug-in socket, a connection for concrete pipes and reinforced concrete pipes according to DIN EN 1916 and DIN V 1201, whereby the seal is firmly embedded in the socket during manufacture of the pipe. ...
-
Manufactured by Trelleborg Pipe Seals Duisburg GmbHbased in GERMANY
Trelleborg 582 Din-Lock (metric) seal is a combined lip and compression sealing system that is positioned in the socket by the pipe manufacturer after the bell has been formed. The unique design has a flexible thermoplastic elastomer sealing element bonded to a polypropylene retaining ring which holds the seal ...
-
Manufactured by Viking Johnsonbased in UNITED KINGDOM
AquaFast’s unique pressure sealing system offers a simple and reliable solution to connecting polyethylene & PVC pipe. In addition, an enhanced gripping mechanism offers end load restraint, resisting pipe pull out. No special skills or tools are required making installation effortless and quicker than other ...
-
Manufactured by Rosemount Measurement Division - Emerson Process Managementbased in USA
The Rosemount 1199 Seal System provides reliable, remote measurement of process pressure and protects the transmitter diaphragm from hot and cold, corrosive, or viscous processes. Rosemount seal systems are designed for reliability in even the toughest applications. Rosemount 1199 diaphragm seals can be attached ...
-
Manufactured by Trelleborg Forsheda Pipe Sealsbased in NETHERLANDS
The Forsheda 582 Din-Lock™ seal is a combined lip and compression sealing system that is positioned in the socket by the pipe manufacturer after the bell has been formed. The unique design has a flexible thermoplastic elastomer sealing element bonded to a polypropylene retaining ring which holds the seal ...
-
Manufactured by PXL Industriesbased in FRANCE
Original installation, rebuild and maintenance Wo bring experience end profe to the following : Advice, Expertise, Study, Design, Manufacturing, Distribution, Installation ...
-
Manufactured by DS Dichtungstechnik GmbHbased in GERMANY
DS BS 2000 is a sealing ring made of elastomers with dense structure for the plug-in socket for manhole rings made from concrete and reinforced concrete with standard spigot end according to DIN V 4034-1. The sealing means is firmly fixed to the socket during manufacture of the chamber components. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you