Seismic Equipment Available In Bulgaria
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Deep water sub-bottom profiling applications (1Km to 12Km) require an array of 4 to 36 low frequency transducers installed in a hull-mounted sea chest. The HMS-12KM system with the HMS-622 CHIRPceiverTM and hull mounted transducer arrays fills this range of survey requirements. The frequency bands supported by the HMS- 12KM include LF (1KHz-10KHz) and HF (8KHz-23KHz) with a standard 2 channel ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
Manufactured by Zhaofeng Sensor Equipment Co., Ltd.based in CHINA
KCK/KCL/LCK type connectors, power cables, connectors for near surface surveys, ...
-
Manufactured by Ground Hog Incbased in USA
The Ground Hog C-71-SD is a Seismic drill designed to deliver years of reliable service with superior performance. It is modeled after our model C-71-5 which has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance. The heart of the C-71-SD is our time-tested ...
-
Manufactured by ESG Solutions - a Spectris Companybased in CANADA
Seismic sensors detect and measure small ground vibrations caused during mining operations. They can be deployed in various configurations around a zone of interest to provide the best possible detection coverage. ESG offers a range of seismic sensors, including geophones and accelerometers for downhole, uphole and surface installation. ...
-
Distributed by Geomatrix Earth Science Ltdbased in UNITED KINGDOM
The Geode seismic recorder is the next generation of seismic recording systems, combining the best of Geometrics' traditional seismic recorders with the flexibility and convenience of a distributed system. Its ideal for refraction or reflection, MASW, MAM, downhole or VSP - even tomography surveys. Place a Geode module out on the line ...
-
Manufactured by GeoSIG Ltdbased in SWITZERLAND
GeoSwitch is packed with many dominant distinctive features offering approvingly reliable protection for people, critical assets, devices and industrial processes. Delivering highly accurate detection of a strong earthquake or structural vibration with various safe shut down options. GeoSwitch has a broad range of applications such as Industrial Processes, Chemical Processes, Gas Valves, ...
-
Manufactured by Zhaofeng Sensor Equipment Co., Ltd.based in CHINA
Frequency 6Hz to 250Hz, various peak force options, lower frequency ones are ...
-
Manufactured by Studio Prof. Marchetti S.r.l.based in ITALY
The seismic dilatometer is an add-on module that may be combined with the dilatometer or with the CPT for measuring the shear wave velocity Vs (SDMT) and compression wave velocity Vp (SPDMT) ...
-
based in RUSSIA
Seismic station SGD-SEL for profile survey. Seismic station SGD-SEL is designed for engineering geophysical ...
-
Manufactured by GeoVistabased in UNITED KINGDOM
. The motorised clamping arm allows for work in a range of borehole diameters, by ensuring adequate coupling for the seismic signal. The geophones are non-gimbaled, 3 axis devices, allowing for seismic energy to be measured in X and Y horizontal axis and in the vertical Z ...
-
Manufactured by Mamava Inc.based in USA
Seismic anchoring kit available for Original and XL pods (>400 ...
-
Manufactured by Zhaofeng Sensor Equipment Co., Ltd.based in CHINA
Mainly operated in jungle or forest, mini size, controlled by ...
-
Manufactured by ALPHA ACOUSTIKI Ltd.based in GREECE
Machines based on antivibration mounts such as springs, elastic pads etc., during external stimulations (e.g. earthquake, wind, twister etc.) can develop critical displacements. These displacements may stop the operation or even cause serious damage to the machine. Seismic restraints could resist the imposed forces and limit the ...
-
Manufactured by Environmental Mechanics ABbased in SWEDEN
Our seismic add-on can also be run stand-alone but that is not the common procedure. A triaxial accelerometer is used in current version. A digital oscilloscope is used to receive, record and present seismic waves (P and S waves). The add-on can be run together with the Memocone and is activated by a simple change of a switch. The seismic ...
-
Manufactured by Geobit Instrumentsbased in GREECE
This type of sensor has been designed for microseismic events recording during hydraulic fracturing reservoir experiments. The sensor body has been designed in order to house double geophone strings at each axis. The orientation follows the 3-axis principle. This sensor has an external diameter of 50mm allowing it to be installed into small and shallow boreholes, hence reducing the cost of ...
-
Distributed by Geomatrix Earth Science Ltdbased in UNITED KINGDOM
The Geode DZ is a 3D implementation of the highly popular Geode system. The seismic recorder is the next generation of seismic recording systems, combining the best of Geometrics' traditional seismic recorders with the flexibility and convenience of a distributed system. It’s ideal for specialist 3D reflection projects where other systems ...
-
Manufactured by DMT GmbH & Co. KGbased in GERMANY
Summit is a seismic data acquisition system. The modular concept with its different numbers of channels provides the user with an extremely flexible system giving the greatest data quality in a wide range of applications. For further information on SUMMIT as well as technical data refer to our SUMMIT product site at ...
-
Manufactured by Wartsila Corporationbased in FINLAND
Our seismic compressors offer an integrated and compact solution to your high-pressure needs. Wärtsilä Hamworthy seismic compressors feature a low lift concentric valve and generous inter-stage cooling to minimise the amount of absorbed power. This results in very high overall efficiency. Each machinery package includes a choice of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you