Geotomographie Seismic Equipment
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Vibrator Source ElViS III is used to generate P- or S-wave sweep signals. It can be used for shallow seismic surveys. The source consists of a moving mass driven by a cascaded linear motor. The source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. The ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The vibrator source Elvis VII is used to generate P- or S-wave sweep signals. The source consists of a moving mass driven by a cascaded linear motor. The source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. The source is most suitable for reflection ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Landstreamer LS-24 is used to record P-, S- or surface waves. The landstreamer is suitable for MASW or reflection seismic applications, especially on paved ground. It consists of several horizontally or vertically oriented sensors mounted on sledges which are attached to a robust belt. The belt can be hooked to a vehicle and moved ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Impulse Generator IPG5000 (formerly named IPG1005) is the high voltage supply to the seismic borehole sources BIS-SH and SBS42. This generator is applicable for seismic tomography and crosshole tests in depths greater than 60 m. The energy is stored in a large capacitor bank, which discharges through a mechanical switch. The ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The wireless trigger unit WTU1 is used to replace trigger cables if e.g. roads or rivers prevent a continuous seismic measurement. î¢e wireless trigger unit WTU1 works with nearly all impulse sources including sledge hammers. The wireless trigger unit WTU1 consists of two boxes which include the sender and the receiver unit. ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The borehole source BIS-SH-DS generates horizontally polarized shear waves (SH) and compressional waves (P). The seismic signals are highly repeatable. The source works in dry or water filled boreholes and can be used in vertical or horizontal boreholes. Energy released by the IPG800 discharges through a system of coupled coils. They ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
to analyze due to the easy recognition of the first arriving seismic waves. Sparker pulses are released through manual or automatic triggering of the impulse generator (IPG5000) controlled by the remote control unit (RCU). The seismic signals are highly repeatable. ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The Impulse Generator IPG800 is the high voltage supply to the seismic borehole source BIS-SH-DS. This generator can be mainly used for crosshole test for shallow geotechnical investigations, mostly in depths until around 60 m. The energy is stored in capacitors, which discharge through a mechanical switch. The lightweight IPG800 is ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The borehole geophone BGK5 is used to receive P- and S-waves in dry or water-filled boreholes. The geophone can be mainly applied for crosshole tests using the BIS-SH-DS seismic source and the generator IPG800 and downhole tests with e.g. a Sledge Hammer. This borehole geophone BGK5 consists of four horizontal sensors, separated by ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
or automatic triggering of the impulse generator (IPG5000) controlled by the remote control unit (RCU). The seismic signals are highly repeatable. ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
to the easy recognition of the first arriving seismic waves.The BHC5 reciever consists cable drum, hydrophones moulded on cable and battery box for pre-amplication. Accessories, such as a cable spooler device for cable on drums and a clamping device supports a proper positioning and clamping the cable during ...
-
Manufactured by Geotomographie GmbHbased in GERMANY
The BGK1000 is manufactured by Hinz Messtechnik GmbH and exclusively distributed by Geotomographie. It is a digital borehole geophone used to receive P- and S-waves in dry and water filled boreholes and applicable for downhole tests also for greater depths. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you