Only show results available in Connecticut? Ok

seismic analysis equipment

  • Vibration and Acceleration Values

    Knowledge of vibration and acceleration values generated by machines, states the health of these. It is one of the typical applications where accelerometers are used. There are many applications where it is needed to determine the vibration and acceleration values. Measurements in aerogenerators, structural tests, seismic analysis, vibration test ...

    By instrutechSOLUTIONS based in Las Rozas de Madrid, SPAIN. from Measurement Sensors Product line

  • Model GS-1 - Low Frequency Seismometer Sensor

    The GS-1 is a high sensitivity, self-generating velocity detector with extremely low natural frequencies. It is an excellent choice for detecting seismic activity for structural analysis, geologic hazards, vibration isolation, etc

    By Geospace Technologies Corporation based in Houston, TEXAS (USA). from Sensors Product line

  • Refraction Seismology

    Refraction seismology investigates refracted wave seismic velocities. The analysis is based on precise measurement of the propagation time between an energy source and vibration captors called geophones. Refraction seismology sections allow us to define the present lithologies as well as their geometry and velocity variations within.

    By Geo2X based in Oulens-sous-Echallens (VD), SWITZERLAND.

  • PASI - Model GEA 3 - 24-Bit Real Data Acquisition Seismograph

    Gea3 is a 24-bit real data acquisition seismograph in a waterproof container. GEA3 is a compact-sized 3-channel seismograph with a 24 bit acquisition board with USB interface for external PC (not included). Suitable for Downhole and Crosshole applications, it’s perfect also for small scale seismic refraction and surface waves analysis.

    By PASI s.r.l. based in Torino, ITALY. from Seismic - Exploration Seismograph Product line

  • PASI - Model 4,5 Hz - Horizontal Geophones

    Horizontal Geophones 4,5 Hz. Ideal for multichannel analysis of surface waves (MASW).

    By PASI s.r.l. based in Torino, ITALY. from Seismic - Horizontal Geophones Product line

  • SunLink - Model RMS - Precision-Modular for Roof Mount Systems

    Precision-Modular RMS is the newest addition to SunLink’s quality engineered Precision RMS roof mount racking family — offering Precision RMS quality at a much lower price point. The aluminum system is available for 60 and 72-cell modules and 10 degree tilt. Precision-Modular RMS’ building-block design is assembled, laid out and ...

    By SunLink Corporation based in Mill Valley, CALIFORNIA (USA). from Roof Mount Systems Product line

  • Earthquake Engineering Service

    BEING PROACTIVE TODAY MITIGATES TOMORROW’S RISKS. Let the engineers and geologists at SAGE help you understand and mitigate the seismic risks in your infrastructure portfolio. Whether you’re building a new structure in a highly seismic environment such as California, evaluating the probability of failure of an existing dam in the ...

    By SAGE Engineers, Inc. based in Roseville, CALIFORNIA (USA).

  • Model cGMP - Pharma Reactors

    Standard or taylor made reactors, according to DIN or ASME regulations, with heating / cooling systems, and customized agitators for the typical sanitary, antiseptic and sterile processes

    By E. Bachiller B, S.A. based in Parets del Vallés, SPAIN. from Vessels & Process Equipment Product line

  • Parkline - Blast Resistant Buildings

    Parkline produces what is most commonly referred to as blast resistant buildings, shelters, houses and rooms to withstand or contain the dynamic and concussive forces of blasts and explosions, the extreme heat, flame and smoke created by fires, excessive noise levels, and the blunt force of projectiles that structures are subjected to within ...

    By Parkline, Inc. based in Eleanor, WEST VIRGINIA (USA).

  • PASI - Model ANTEO - Exploration Seismograph

    ANTEO is the expression of a new philosophy for a modular exploration seismograph. The system consists of a single control & display unit (ANTEO CU) that works together one or more special cables (ANTEO AD6-x), each one with no.6x 24 bits A/D converters to be connected to any standard analogue geophone.

    By PASI s.r.l. based in Torino, ITALY. from Seismic - Exploration Seismograph Product line

  • PASI - Model 3DLG-2 - 3D Land Geophone

    The 3D Land Geophone Mod. 3DLG-2 is the ideal accessory to add to your seismic instrumentation and perform HVSR, MASW and Vibration Analysis. One vertical and two horizontal high-performing sensors - with 2Hz resonance frequency and properly coupled - are mounted in a robust waterproof case, delivered with adjustable feet and inter-changeable ...

    By PASI s.r.l. based in Torino, ITALY. from Seismic - 3D Land Geophone - HVSR - MASW - Holisurface Product line

  • SunLink - Model RMS - Precision for Roof Mount Systems

    The highly engineered Precision RMS makes solar a viable option for a much wider range of rooftops. With two load optimizing substructure options — one that includes feet that can be adjusted to align loads with structural elements of the roof and a second that distributes loads along the length of the long beam — Precision RMS is ...

    By SunLink Corporation based in Mill Valley, CALIFORNIA (USA). from Roof Mount Systems Product line

  • Gabion - Gravity Retaining Walls

    Terra Aqua’s gabion gravity retaining wall systems are monolithic gravity mass structures and follow standard design methods for gravity retaining walls. The following information is provided by Terra Aqua as a design guide to assist Professional Engineers, Government Agencies, Land Developers, and Contractors in the proper design, ...

    By Terra Aqua Inc. based in Fort Smith, ARKANSAS (USA).

  • PASI - Model Gemini 2 Hz - 3D Land Geophone with USB Interface

    Gemini-2 represent PASI  answer to the increasing request for HVSR acquisition: a single waterproof case with integrated a low frequency, high performing 3D-geophone assembly (two versions available, with real 2Hz sensors properly coupled) and a powerfull true 24 bit data acquisition board. Through Gemini USB interface and the related data ...

    By PASI s.r.l. based in Torino, ITALY. from Seismic - 3D Land Geophone - HVSR - MASW - Holisurface Product line

  • Model PMM - Open Circuit Cooling Towers

    PMM series is suggested in big size plants. Every unit is designed according to the technical data of the relevant project. All models are made of factory pre-assembled modules and components. The particular design of PMM series grants a quick and inexpensive installation, besides the possibility of adjusting/designing the unit to fit the existing ...

    By MITA S.r.l. based in Siziano (PV), ITALY. from Open Circuit Cooling Towers Product line

  • Pressure Vessels and Tanks

    Joseph Oat has been manufacturing pressure vessels and tanks longer than any other company in the United States. Our experience and expertise in the design and manufacturing of pressure vessels and tanks in all sizes and for a myriad of applications is well documented. From small precision vessels to huge equipment weighing up to 200 tons,

    By Joseph Oat Corporation based in Camden, NEW JERSEY (USA).

  • Diemme - Filtration Thickeners

    Diemme Filtration’s High Rate thickeners are an advanced product derived from our extensive experience in solid/liquid separation applications, such as mining, chemical, waste water and more, coupled with our technical research to continuously improve and optimize sedimentation in filtration plants.

    By Aqseptence Group GmbH based in Aarbergen, GERMANY. from Diemme Filtration Product line

  • Freedom Data PC - Nondestructive Testing Platforms System

    The Freedom Data PC represents the ultimate professional, versatile, battery powered NDT Platform, as it can be utilized for evaluation of structures/infrastructure and geophysical seismic engineering surveys. A custom module can be added to this platform for the purposes of Structural Health Monitoring, General Purpose Testing, and Data ...

    By Geomorph Instruments based in Nicosia, CYPRUS. from NDT Platforms Product line

  • Tailor Made Pressure Vessels

    Bachiller designs and builds all kinds of tailor made pressure vessels, such as tanks, reactors, collectors, autoclaves etc. according to the main international mechanical design codes, using the ultimate design software and according to the particular specifications of the client.

    By E. Bachiller B, S.A. based in Parets del Vallés, SPAIN. from Vessels & Process Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you