Seismological Equipment
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
Stand-alone seismograph, 3 channels modular, 24 bit, 100-3500c/s, Li-Ion batteries. Stand-alone seismograph for seismology and local events monitoring. This unit is designed for recording and automatic storage of every seismic event either on internal SD memory or by sending data to collection centre according to set modalities. It can be ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
Data storage in marine environments has long presented the offshore industry with great difficulties. Recovery of a data storage device from a seabed station requires the equipment housing to be opened, which is often no small task considering how secure deep-sea housings can be. Bad weather offshore can make the task even more challenging, doubly so if the same station needs to be redeployed ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
For any seismic data acquisition work, one of the most precious pieces of information is the exact time. Every OBS needs to be time synchronized so that data can be compared based on timestamps. Precision is paramount. GPS is the most common method of synchronization used today, However, many low-cost GPS receivers lack a pulse-per-second (PPS) signal and their time measurement usually has high ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
Data collection is one of the most essential factors in any subsea operation, if not the most essential. The collection and accurate recording of data must be carried out to a high standard across the lifetime of a project, which can run for months and sometimes ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
K.U.M. had great success from the start with NAMMU. However, the team was soon faced with an interesting challenge: how to develop a new, more compact, short-term OBS system that would carry only the OBS essentials in an even smaller, more cost-effective ...
-
Manufactured by K.U.M. Umwelt- und Meerestechnik Kiel GmbHbased in GERMANY
Up to 50 units can be transported in one 20-foot shipping container. Easy and intuitive programming is offered over a web interface via Wi-Fi – accessible from your laptop or smartphone. No special software is required. Usually a free-falling system, it can also be deployed by ...
-
Distributed by Geospace Survey Services Limitedbased in UNITED KINGDOM
The seismic reflection technique maps the subsurface stratigraphy based on density and velocity contrasts between earth materials. The seismic wave, generated at the ground surface, travels through the earth and is reflected an interfaces where a change in density and velocity occurs. The reflected waves are detected by a geophone array and recorded by a ...
-
Distributed by Geospace Survey Services Limitedbased in UNITED KINGDOM
The refraction method uses seismic waves, introduced into the ground by a weight-drop source, to determine the compressional velocity of earth material. The seismic wave changes direction and speed, or refracted, as it propagates through the earth. When the refracted seismic wave impinges on an interface at a critical incident angle, the energy travels along the interface and sends seismic ...
-
by Sisprobebased in FRANCE
SISPROBE offers a full range of solutions to challenges in the design and deployment of seismic surveys, seismic data acquisition, processing and interpretation, exploration, exploitation, mine safety, seismic risk, environmental impact, long-term monitoring and many other ...
-
Manufactured by Streckeisen GmbHbased in SWITZERLAND
The iconic STS-1 was the very first broadband-seismometer available and it made broadband-seismology possible. Its performance was legendy and only recently it was outperformed with the introduction of STS-6. We don't support STS-1 ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
3 components Seismonitor is designed for seismological, engineering and scientific studies where a passive, low noise, short period triaxial sensor is required. Seismonitor contains three triaxially oriented, GS-1 low frequency seismometers installed in a single deployment ...
-
Manufactured by Kinemetrics Inc.based in USA
The Q330HR digitizer sets a new performance standard in seismological instrumentation, building upon the widely praised ultra-low power Q330 digitizer. The Q330HR breaks the 24-bit performance barrier to extend the capability of instrumentation for advanced research. The Q330HR remains 100% compatible with ...
-
Manufactured by McLane Research Laboratories, Inc.based in USA
McLane Glass flotation, depth-rated to 6,000m, is ideal for moorings and custom instrument design such as ocean-bottom seismology instruments. Flotation modules with 12” borosilicate glass spheres have 10 to 40kg of buoyancy and are protected by polyethylene, high visibility hardhats. Multiple spheres in a modular configuration ...
-
Manufactured by Hpsystem.IT Srlbased in ITALY
for applications in seismology and in the structural field. The sensor is equipped with an efficient Microprocessor which manages both the Analogical to Digital Conversion, as well as the communication form related to data ...
-
Manufactured by Romor Ocean Solutionsbased in CANADA
McLane Glass flotation, depth-rated to 7,000m, is ideal for moorings and custom instrument design such as ocean-bottom seismology instruments. Flotation modules with 12” borosilicate glass spheres have 10 to 40kg of buoyancy and are protected by polyethylene, high visibility ...
-
Manufactured by ISTI - Instrumental Software Technologies, Inc.based in USA
The GEOfba200 (Fig. 1 - 3) is a very low-noise triaxial force-balance accelerometer with a large dynamic range, suitable for seismology, hazard mitigation and civil engineering applications. The instrument has both a flat response to ground acceleration from DC to 215 Hz and a stable phase response within the passband. Output range is ...
-
Manufactured by MoHo s.r.l.based in ITALY
-effective strong-motion accelerometer and velocimeter designed for permanent monitoring of structures and of ground motion. Precise enough to provide information of engineering and seismological interest, cost-effective for being employed in extended networks. September 2019: the new Suricat is on the ...
-
by 1PointFivebased in USA
generations. Geologic sequestration has been in use for decades. The history of intense study and real world application by leading experts in the fields of geology, seismology, fluid characterization, well engineering and reservoir modeling means that today we have a powerful, proven tool with which to capture and store CO2 at scale. ...
-
Manufactured by MoHo s.r.l.based in ITALY
dynamics and sensitivity, permit outstanding signal-to-noise ratios even at the low frequencies of seismological ...
-
based in RUSSIA
Seismic station SGD-SEL for profile survey. Seismic station SGD-SEL is designed for engineering geophysical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you