self-priming centrifugal pump equipment near Australasia

  • Model MKP-Bio - Magnetic Drive Centrifugal Pump for Sterile Processes

    Designed to EHEDG recommendations. Sterile, no dead areas, CIP- and SIP-able. Wetted parts: surface finish Ra ≤0.8, internal corners rounded with radius of R3, surfaces inclined >3°. Compact design. Vertical configuration, fully self-draining through the suction port (no flush, drain or vent connections). Available in various grades of ...

    By CP Pumpen AG Distributor in Seven Hills, AUSTRALIA. from Magnetic Drive Centrifugal Pump for Sterile Processes Product line

  • Model IN-VB - Staged Centrifugal Pumps

    Staged centrifugal pumps from the IN-VB(-S) range are multistage, vertical centrifugal pumps in an IN-LINE design. The non-self-priming centrifugal pumps distinguish themselves through a high rate of efficiency as well as durability. Wetted parts are made from stainless steel AISI 304 or AISI 316 L. The ≥ 0.75 kW three-phase motors correspond to ...

    By SPECK Pumpen Verkaufsgesellschaft GmbH Office in A-New South Wales, AUSTRALIA. from Staged Centrifugal Pumps Product line

  • Booster Pump Units

    Booster units from the Aquacell range contain a non-self-priming, staged centrifugal pump. The fully automatic booster units are compact, have a low noise level and are supplied wired ready for connection and with the pipes in place. All units come with a fully automatic pump control.

    By SPECK Pumpen Verkaufsgesellschaft GmbH Office in A-New South Wales, AUSTRALIA. from Booster Pump Units Product line

  • Shakti Pumps - Open Well Pumps

    Openwell submersible pumps are replacing centrifugal pumps at number of places because of some of the inherent advantages, such as:-No separate foundation is required.Cooling is much better & hence longer life.Convenient to move from place to place.Features: Designed for underwater application- no need of priming and foot valve.Easy installation ...

    By Shakti Pumps (I) Ltd Office in Sydney, AUSTRALIA.

  • Shakti - Vertical Multistage Centrifugal Pumps

    The SCR Pumps are non-self-priming, vertical multistage centrifugal pumps. The in-line design enables the pumps to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. This provides a more compact pump design and pipe-work. Visit the page for more ...

    By Shakti Pumps (I) Ltd Office in Sydney, AUSTRALIA.

  • Shakti - Pressure Booster Pumps

    SH pumps are designed specially for small domestic and industrial applications. This type of pumps generally used with pressure control for maintaining constant water pressure. SH pumps are non-self priming, horizontal, multistage centrifugal pumps. SH pump used with pressure tank and pressure switch for pressure control, ensuring constant ...

    By Shakti Pumps (I) Ltd Office in Sydney, AUSTRALIA.

  • Model CTS series - Self-Priming Centrifugal Pumps

    CTS is an open impeller self-priming centrifugal pump, manufactured from AISI 316L stainless steel.The self-priming feature allows to use the pump in applications where standard CT pumps do not prove useful. The CTS pump is capable of creating up to 4,5 m of suction lift.

    By Tapflo AB Distributor in Brisbane, AUSTRALIA. from Self-Priming Centrifugal Pumps Product line

  • Model GPE, GPM - Self Priming Centrifugal Pumps

    HOMA self priming centrifugal pumps are the ideal solution for many applications in house and garden. High performance, silent operation and low weight easy handling are the main advantages of these units. By installation of the automatic pump control HPS 2  (see HOMA accessory program) on the discharge of the electric motor driven pumps, the ...

    By HOMA Pumps Office in Tingalpa, AUSTRALIA. from Self Priming Centrifugal Pumps Product line

  • Model P3O87 - Self-Priming Centrifugal Trash Pumps

    With up to 2.75 inch solids handling capability. These pumps offer unrivalled reliability through the use of high quality ductile iron castings and 17-4PH stainless steel shafts. Bare shaft, frame mounted, self-priming, heavy duty,solids handling pump

    By Pioneer Pump - Franklin Electric Co., Inc. Office in Sunshine West, AUSTRALIA. from Self-Priming Centrifugal Trash Pumps Product line

  • Prime - Model PP44S8 - End Suction Centrifugal Pump

    The PP44S8 is a high flow, ruggedized pump designed to operate over a broad range of performance while delivering outstanding suction lift. The rugged construction and modular design provide proven reliability and flexibility in the most demanding applications. Bare Shaft, Frame Mounted, Fully Automatic Dry Priming, Vacuum Assisted, Run Dry, Heavy ...

    By Pioneer Pump - Franklin Electric Co., Inc. Office in Sunshine West, AUSTRALIA. from End Suction Centrifugal Pump Product line

  • CEH

    The type CEH (low NPSH) pumps, are a combination of our normal self-priming side channel pumps with the addition of an initial centrifugal stage. The pump construction utilizes the long proven multi-stage design with the suction horizontal into the eye of the impeller and vertical discharge. The inlet stage is a centrifugal stage; with a full ...

    By SIHI Pumps Americas liquid & vacuum pumps Office in Bayswater North, AUSTRALIA.

  • Tidy Planet DEHYDRA - Food Waste Processing Station

    The food wastes are added to the hopper by the operator, the integrated food waste disposer shreds the food waste into tiny particles, the foods with a flow of water are pumped to the Dehydra Hydro Extractor, where through centrifugal action, the WasteStation forces out the excess liquid from the macerated waste. This “grey water” is ...

    By Tidy Planet Limited Distributor in Kilda, AUSTRALIA. from Food Waste Processing Station Product line

  • Vossche - Horizontal Multistage Centrifugal Pump

    Horizontal multistage centrifugal pump is produced using advanced technology in the world. It is non-self priming, and can be divided into two types which are sectional type and cylinder type. Horizontal motor and mechanical seal are used. Based on the high efficiency, reliable quality, wide application range and energy saving performance, our ...

    By Vossche Office in SINGAPORE. from Horizontal Multistage Centrifugal Pump Product line

  • Model BGP20CX - Gasoline High Pressure

    Pump Type : General Purpose, Centrifugal, Self-priming, Liter per Minute (L/M) : 700, Inlet Diameter (inch/mm) : 2'/50, Outlet Diameter (inch/mm) : 2'/50, Suction Head (m) : 8, Total Head Lift (m) : 28, Engine Model : BG200, Power Output (HP) : 6.5, Engine Type : Gasoline, Air-cooled, Single Cylinder, 4-Stroke,OHV, BorexStroke(mm) : 68x45 , ...

    By Fujian Best Industrial Co. Ltd based in Fuzhou, CHINA.

  • Model Series TMR G2 - Magnetic Drive Centrifugal Pump

    Designed for medium to high pump capacities with magnetic self-alignment system.

    By Lutz Pumpen GmbH Office in Guangzhou, CHINA. from Magnetic Drive Centrifugal Pump Product line

  • Model TPOW - Volute Type Split Casing Double Suction Pump

    TPOW series single-stage double-suction split volute centrifugal pump is produced by our company based on importing the advanced technology from Germany in accordance with the market demand. By using the original and modified impeller and cutting, the pump boasts a full and wide range of spectrum and high service efficiency. The water pump can ...

    By Zhejiang Pacific Pump Manufacture Co., Ltd based in Wenzhou, CHINA.

  • sanitary pump

    Sanitary pump Model: sanitary centrifugal pump, sanitary self-priming pump. . . Operation: manual, pneumatic, electric Specification:DJ1.5-14---DJ50-36 , applied to the stainless steel pipeline system Quantity ton/h: 1.5-50 meter/water column:14-36 Electric power: 0.5-11 Entry/Exit: 40/25--80/65 Material quality:SUS304, SUS316L Standard:ISO, DIN, ...


  • Vertical Multistage Pump

    Vertical multistage centrifugal pump contains several seriesT such as BL(T)2T BL(T)4, BL(T)8T BL(T)16, BL(T)20, BL(T)32; BL(T)45 as well as BL(T)90 series, and is manufactured using progressive technology in the world. These products are non-self priming type, and the standard vertical motor and mechanical seal are adopted.

    By Shimge Pump Industry Group Co.,Ltd. based in Wenling City, CHINA. from Vertical Multistage Pump Product line

  • Self-primming Horizontal Multi-stage Pumps-SBM

    Technical Features SBM series self-primming horizontal multi-stage centrifugal pumps, the pump casing, impeller, inlet/outlet section of pumps, shaft are made of stainless steel, mechanical seals, with features of  exchangeable components, stable quality, small size, light weight, corrosion resisting, high efficiency, long working life, ...

  • Model HDP Series - Diesel Engine Trash Pump-HDP

    Features: Max. Solid Size: 30mm Self-priming centrifugal pumps which made of high pressure aluminum alloy casting Heavy duty full frame protection 3 inch suction and discharge ports Large Capacity Fuel Tank Available (optional) 

    By Hengtai International Co Limited based in Ningbo City, CHINA. from Diesel Engine Trash Pump-HDP Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you