Semiconductor equipment in Australia

  • Premium

    HORIBA - Model LU-A1000 Series - Liquid Auto Refill System

    The LU Series can offer uninterrupted, safe and reliable delivery of the liquid precursor to liquid material baking systems and injection systems, increasing uptime and reducing operator handling and risk of process contamination. Includes a function for automatically implementing a remaining liquid purge sequence. Maintenance efficiency and ...

    By HORIBA Europe GmbH Office in AUSTRALIA. from Semiconductor Product line

  • Model PFIB EFI - Semiconductors

    The world's most advanced DualBeam Plasma FIB platform for semiconductor failure analysis, process development and process control applications

    By North America NanoPort (FEI) Office in Canberra, AUSTRALIA. from Semiconductor Product line

  • Helios NanoLab - Model 460F1 - Semiconductor

    The Helios NanoLab™ 460F1 contains the EasyLift Nanomanipulator to support higher yields for TEM sample lift-out through an intuitive, integrated UI. It also features the MultiChem Gas Delivery System for optimized beam-assisted deposition or etching. Both systems were designed and built based on years of application knowledge and expertise ...

    By North America NanoPort (FEI) Office in Canberra, AUSTRALIA. from Semiconductor Product line

  • Helios - Model PFIB - Semiconductor

    The Helios PFIB is the world's most advanced DualBeam Plasma FIB platform for large area deprocessing to enable electrical fault isolation of advanced process ICs and advanced failure analysis of 3D packages. The Helios PFIB system combines the innovative Helios Elstar™ with UC technology electron column for high-resolution, high-contrast ...

    By North America NanoPort (FEI) Office in Canberra, AUSTRALIA. from Semiconductor Product line

  • Metrios - Model TEM - Semiconductor

    The first TEM dedicated to the semiconductor industry. Advanced logic and memory manufacturing processes are becoming more reliant on fast turnaround of precise structural and analytical data to be able to quickly calibrate tool sets, diagnose yield excursions, and optimize process yields. At technology nodes below 28nm, especially in cases where ...

    By North America NanoPort (FEI) Office in Canberra, AUSTRALIA. from Semiconductor Product line

  • Premium

    ECO PHYSICS - Model M17 - End-Point Control System for CMP Processes

    M17 provides a solution for a wide range of complex problems associated with CMP process control. This has been used successfully in manufacturing and development lines worldwide since 1996. The basic approach to control a CMP process containing a nitride change at the stoplayer is the foundation of this M17 system. M17 has been developed jointly ...

    By ECO PHYSICS AG Distributor in Vic, AUSTRALIA. from Semiconductor Applications Product line

  • Premium

    HORIBA - Model HC-300F - Two-Wire Transmitter

    Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range switching).

  • Premium

    HORIBA - Model HC-200F - Four-Wire Analyzer

    Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range switching).

  • Geokon - Model 3400 - Semiconductor Piezometers

    The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type ...

    By Geokon Inc Distributor in Bayswater, AUSTRALIA. from Piezometers Product line

  • Premium

    HORIBA - Model GA-360E/F360E Series - Trace Gas Monitor

    The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the ...

    By HORIBA Europe GmbH Office in AUSTRALIA. from Process & Environmental - Ambient Monitoring Product line

  • Premium

    HORIBA - Model HT-110 - Online TOC-Analyzer

    The continuous online TOC-Analyzer HT-110 is suitable for the measurement ot total organic carbons in Purified Water (PW), Water For Injection (WFI) and Highly Purified Water (HPW). The unit is operating according to USP 643. It is applicable for pharmaceutical and/or semiconductor manufacturing. The measuring principle is based on UV-Oxidation ...

  • Premium

    Munters - Zeolite Rotor Concentrator/Oxidizer System for VOC Abatement

    Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite ...

    By Munters Zeol Division Office in Brisbane, AUSTRALIA. from Pollution Control & VOC Abatement Product line

  • Piranha - Plasma Conversion System

    Abatement of global warming PFC gases. The semiconductor industry has committed itself to further reduce its emissions of perfluorinated compounds (PFCs), which give rise to the 'greenhouse effect'. Most semiconductor manufacturers have already begun to implement measures to combat PFC emissions, with PFC abatement a key part of an overall ...

    By Cs Clean Systems AG Office in McMahons Point, AUSTRALIA.

  • Environdata - Humidity Sensor

    The RH40 series relative humidity sensor features a field interchangeable tip that requires no field re-calibration. State-of-the-art semiconductor technology is employed, together with a thin film polymer that changes di-electric constant with atmospheric relative humidity.

    By Environdata based in Warwick, AUSTRALIA.

  • Barometric Pressure Sensor

    The WS-MM-DP-925 barometer combines compensated and calibrated silicon pressure sensors with precision signal conditioning circuitry. The on board voltage-reference and reverse voltage protection offers independence from the voltage supply. Only unregulated DC-supply in the range from 7.5 to 24 VDC is required. The WS-MM-DP-925 is for use with ...

    By Amalgamated Instrument Co Pty Ltd based in Hornsby, AUSTRALIA.

  • DispenseJet - Model DJ-2200 - Spray Valve Jet

    Flux application using the DispenseJet DJ-2200 spray valve jet is a superior alternative to dipping and screen printing during assembly operations for flip chips and other semiconductor packages. Jetting offers both speed and accuracy, and eliminates contamination and material waste associated with conventional methods. Jetting allows 100% ...

    By Nordson EFD Office in Sydney, AUSTRALIA.

  • Model RG2/RG4 Series - Incremental Encoder Systems

    RG2 and RG4 incremental encoder systems have a strong reputation established over many years for providing highly-reliable position feedback, even in conditions considered unsuitable for most open, optical linear encoders. They all feature the original Renishaw state-of-the-art filtering optics, with excellent immunity to dust, scratches and light ...

    By Renishaw plc Office in Mulgrave, AUSTRALIA. from Optical Encoders Product line

  • Spectrum II - Model S2-900 - Precision Fluid Dispensing System

    The world-class precision and quality Spectrum™ II system for assembly of mobile electronics, semiconductors, MEMS, and PCBs: Consistent machine quality and reliability with the world's preferred, fully-automated fluid dispensing system. High board density and minimal wet-out distances enabled by market-leading total system wet dispense ...

    By Nordson EFD Office in Sydney, AUSTRALIA. from Fluid Dispensing Systems and Equipment Product line

  • SMD23 Integrated Stepper Motor

    Automated Control Engineering Group (A.C.E.) is now distributing the AMCI SMD23 Size 23 Integrated Stepper Motor Drive. The SMD23 package combines simplified installation in a dynamically matched drive-to-motor package. The SMD23's size 23 stepper motor package has been designed with powerful 3.4 amp stepper drive technology to achieve a space ...

    By Automated Control Engineering Group Pty Ltd based in Cardiff, AUSTRALIA.

  • Premium

    UltraClean - Model UCW3300 - UltrapureWater Mixed Bed Resin

    UltraClean™ UCW3300 mixed bed resin is ready to use, 1:1 chemical equivalent that is highly regenerated in the H+ and OH- forms. UltraClean UCW3300 resins are manufactured by a proprietary process that achieves the high purity for ultra-pure water applications for the micro-electronics and semi-conductor industry (May also be suitable for ...

    By Purolite Corporation Office in Baulkham Hills, AUSTRALIA. from Ultrapure Water Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you