We couldn't find any separation systems equipment suppliers or service providers located in Kosovo

Here is a list of equipment results with suppliers serving Kosovo

Separation Systems equipment available in Kosovo

  • Premium

    Eldan - Model WST - Water Separation System

    The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Material Separation Product line

  • Premium

    Bypass Separator System

    Our bypass separators provide the ideal solution for low risk floods – when there is little possibility of a combined heavy rainfall and large spillage.

    By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Fuel/Oil Separators Product line

  • Premium

    Ad Rem - Plastic Separator System

    Each year, millions of tons of plastics end up in landfill. Not only is this damaging for the environment, you also throw away a valuable commodity.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM. from Recycling Systems Product line

  • Showcase

    TiPSS - Model CPI - Corrugated Plate Interceptor

    The CPI is the basic TiPSS unit mainly used for oil-water separation. The CPI holds modular-counter-current-flow plate packs executed in GRP or Stainless Steel. The CPI basin can be executed in concrete or steel. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The ...

  • Premium

    Flottweg Tricanter - Three-Phase Liquid-Solid Separation System

    In three-phase separation, it is possible to separated two liquid phases from one solid phase at the same time. The Flottweg Tricanter is the perfect partner for separating these three phases. The different densities of the (immiscible) liquids and the solid mean that all three phases can be discharged simultaneously using the Tricanter. This is ...

    By Flottweg SE based in Vilsbiburg, GERMANY. from Others Product line

  • Premium

    Redoma - Model ESS Series - Electrostatic Separation System - Up to 1750 kg/h

    REDOMA supplies fully automatic systems consisting of an Electrostatic Separator, a storage bin with a variable speed screw conveyor, together with infeed and outfeed transport equipment and a dedusting system. You can easily add this separation line to your existing cable recycling plant. Extremely little manpower is needed for this operation.

    By Redoma Recycling AB based in Malmö, SWEDEN.

  • Separator - Model ConSep 2000 system - ConSep Conveyor

    The ConSep® conveyor-separator provides outstanding chip removal and coolant cleaning for your machine tool. With the capability to handle nearly any chip type and material, while providing coolant cleanliness to 50 micron nominal, ConSep systems are well suited for general purpose machining. Tank cleanout periods can be extended from monthly ...

    By Mayfran International based in Cleveland, OHIO (USA). from Separator Conveyors Product line

  • Separator - Model ConSep 2000II system - ConSep® conveyor

    The ConSep® conveyor-separator provides outstanding chip removal and coolant cleaning for your machine tool. With the capability to handle nearly any chip type and material, while providing coolant cleanliness to 50 micron nominal, ConSep systems are well suited for general purpose machining. Tank cleanout periods can be extended from monthly ...

    By Mayfran International based in Cleveland, OHIO (USA). from Separator Conveyors Product line

  • Guillotines - Separation System

    Guillotines of great robustness, built with structure of columns and automatic operation. Putting the full charge over a conveyor belt feeds the guillotine. It automatically detects the load and lower the blade to cut. The cut section of plastic falls onto a conveyor that leads her to the crivado trommel. At the same time plastic bullet is fed ...

    By Plasmaq, LDA based in Carreira d`Água, PORTUGAL. from Equipment - Separation Product line

  • Separation System

    Separation SystemFor the preparation of alternative fuels, the separation of contaminants is very important. The separation has to be efficient and completely. Be sides of mechanical separation, the deposition of metals (ferritic and non ferritic) is sometimes necessary to produce the required fuel quality. Hess conveying offers the ...

    By Agenis GmbH based in Sinsheim, GERMANY. from Separating Technology Product line

  • Sepcom - Screw Presses Separation System

    Unique screw - Screw Presses with a unique polymer screw that ensures long life. The separation of slurry has a number of advantages in agriculture.

    By Højgaards Maskinfabrik based in Lemvig, DENMARK. from Separator Product line

  • Model 86/240GR02 - Separation Systems

    Feed by means of positive displacement pump; capacity 750 liters/hour; with run dry protection(PT-100) and control panel. Gravity return. On frame with pump underneath tank.

    By Suparator Systems Europe b.v. based in Vlijmen, NETHERLANDS. from Standard 86-Series Configurations Product line

  • InterSep - Separation Systems

    The InterSep high performance separation system is designed and manufactured to separate particulate contaminants from natural gas and vapor streams. Preventing fouling and corrosion in dry gas streams, coal seam gas and fuel gas, for example, is critical to protect pipelines, valves and other gas processing equipment.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Model CRT - Separation System

    Our range of CRT separators, features more sophisticated CRT separators based on diamond cutting disc technology, as well as smaller manual or automatic ‘Hot Band’ solutions. The customer’s choice on cutting method is mainly dependent on the capacity requirements. The hotband solution is recommended for small scale recycling, ...

    By MRT System International AB based in Karlskrona, SWEDEN. from CRT Recycling Product line

  • EVTN - Model 2000 - Separator System

    Nominal Flow of 20 to 60 GPM. Design Pressure/Temperature 250 psi/250F. Construction Materials 316 SS. 3 Hp, 3 Phase, 60 Hz, Explosion-proof Motors. Design Rotational Speed 6000 RPM. Maximum 'G' Force of 1000. Skid Produced Water Test Results to Meet Customers Discharge Requirements

    By Enviro Voraxialtechnology, INC. (EVTN) based in Fort Lauderdale,, FLORIDA (USA). from Voraxial Product line

  • Binder+Co CRITERION - Separating System

    CRITERION is the system for separating different types of plastic. Also in developing CRITERION, Binder+Co approached the challenge from the view point of the user. The needs of our customers for a compact multi-stream solution led to the conception of CRITERION.

    By Binder+Co AG based in GLEISDORF, AUSTRIA. from Sorting Product line

  • TerraSaline - Model 3.5 / 7.0 - Separation System

    The TerraSaline 3.5 (7.0) is used for the concentration of liquids with low biology until ZLD. The extraction of solids can be done manually or automatically. The request for more water to be treated can be easily answered with the usage of additional TerraSaline.

    By Terrawater GmbH based in Kiel, GERMANY. from TerraSaline Product line

  • EVTN - Model 8000 - Separator System

    Separates solids and oil from water at a rate of up to 170,000 barrels a day. The uniqueness of the Voraxial® Separator is its ability to separate contaminants, such as oil and sand, from large volumes of liquids and without any pressure drop, enabling it to be utilized in many different applications, both offshore and onshore.

    By Enviro Voraxialtechnology, INC. (EVTN) based in Fort Lauderdale,, FLORIDA (USA). from Voraxial Product line

  • Suparator - Model Series 84 - Separation Systems

    The series 84 are the logical next step up from the 86 series. The special Suparator construction is incorporated as a module that is fitted in tanks of different size and shape. The 84 series are meant for more demanding applications and processing of larger volumes of aqueous media. Special constructions like slanted bottoms for sludge ...

    By Suparator Systems Europe b.v. based in Vlijmen, NETHERLANDS.

  • Model 89/040GR01 - Separation Systems

    Feed by means of positive displacement pump; capacity 250 liters/hour. Gravity return. On frame with pump underneath tank.

    By Suparator Systems Europe b.v. based in Vlijmen, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you