Separation Systems equipment in New York

  • Premium

    Eldan - Model WST - Water Separation System

    The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

    By Eldan Recycling A/S Office in Sanborn, N.Y., NEW YORK (USA). from Material Separation Product line

  • WENDT/TITECH Finder - Metal Separation Systems

    WENDT/TITECH finders have been the industry standard in metal recovery technology since their introduction to the North American marketplace in 2001. Our strong focus on research and development has maintained this leadership position. Yesterday's 1-bit metal sensors have evolved from two possible states (metal or no metal) into today's ...

    By WENDT CORPORATION based in Buffalo, NEW YORK (USA). from TOMRA Separators Product line

  • WENDT - Downstream Separators Systems

    The ferrous downstream system is designed to separate and recover shredded steel. For the best results, a combination of large axial pole drum magnets and air classification are used. We also offer systems utilizing a series of drum magnets if lesser quality shred is acceptable.

    By WENDT CORPORATION based in Buffalo, NEW YORK (USA). from Other Product line

  • Model CBRNE - Detection and Separation Automatic System

    Our CBRNE (Chemical, Biological, Radiological, Nuclear, and Explosive) Detection System protects critical national infrastructure – electricity generators, water treatment, oil fields, gas pipelines, port facilities and tunnels – by detecting accidental or deliberate safety and security related incidents involving pollutants, toxins, ...

    By CNIguard Ltd. Office in NEW YORK (USA).

  • Premium

    Hilliard HILCO Hilcosep - Coalescer Separator

    The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are available.

  • Premium

    Eldan - Model UP1500 / UP1750 / FP1500 / FP1750 - Aspirators for Tyre Recycling

    The Eldan Aspirators are used in tyre recycling to separate the textile from the rubber granulates and to classify the rubber granules into three sizes and dust.

    By Eldan Recycling A/S Office in Sanborn, N.Y., NEW YORK (USA). from Material Separation Product line

  • Premium

    Eldan - Drum Wind Screen Separator

    The Drum Wind Screen have been developed to separate crushed complex scrap into: Light fraction and possible cyclone fraction. Heavy fraction. The heavy fraction is classified into coarse and fine particles.

    By Eldan Recycling A/S Office in Sanborn, N.Y., NEW YORK (USA). from Material Separation Product line

  • Premium

    Eldan - Model PC10T / PC15T / PC15 / PC17.5 / PC1000 - Classifiers

    As a basic principle, the Eldan Classifiers use oscillating motion and screens to separate either textile and rubber or metals and the plastic fraction.

    By Eldan Recycling A/S Office in Sanborn, N.Y., NEW YORK (USA). from Material Separation Product line

  • TITECH x-tract - Model XRF - Metal Density Sorting Systems

    The X-Tract XRF is designed to process ferrous shred from an automobile shredding operation and targets free copper and copper meatballs with unsurpassed levels of accuracy and efficiency. This automated sorting process will reduce the copper content in your shredded steel significantly, while simultaneously reducing the need for hand sorting.

    By WENDT CORPORATION based in Buffalo, NEW YORK (USA). from TOMRA Separators Product line

  • Model MSI - Magnetic Separator

    In the process of rolling steel strip, the roll coolant over time will become contaminated with ferrous particles and tramp oil. These contaminants in high enough concentrations can result in increased roll wear and roll changes, reduced production and product quality, increased roll oil and water consumption and decreased coolant life. The ...

    By Filtertech based in Manlius, NEW YORK (USA). from Magnetic Separators Product line

  • Model MMS - Mini Magnetic Separator

    In the processing of ferrous metal working, water, water-based fluids or oils become contaminated with ferrous particles. These contaminants in high enough concentrations result in increased product defects, decreased tool life and fluid life. The Filtertech Model MMS “Mini Mag” Magnetic Separator utilizes a vertical bar design in ...

    By Filtertech based in Manlius, NEW YORK (USA). from Magnetic Separators Product line

  • Betamesh for Stainless Steel Filter Mesh

    This stainless steel filter mesh offers high flow rates and advanced dirt removal capabilities. These meshes are used for oil and fuel systems, mainly where advanced dirt removal capabilities and high flow rates are required, for the protection of steering and injection jets as well as friction bearings.

    By G. Bopp & Co. AG Office in Wappingers Falls, NEW YORK (USA). from Screen Printing Filtration and Separation Product line

  • Eddy - Model HMECS-1500 - Current Separator

    Flexible use – mobile. 3 stocking piling conveyors that can be raised and lowered to maximise production. High throughput. Heavy duty abrasion resistant belts. Energy efficient motors. Sealed shell bearings. Low maintenance. Easily integrated with existing systems

    By EcoHog Ltd Office in Malverne, NEW YORK (USA).

  • Emtrol - Fourth Stage Separators

    Fourth stage cyclones are applied in the underflow from a third stage and are used to collect solids that have already been separated in the third stage.  Solids separated in the third stage are transported to the fourth stage using a small percentage of the flue gas as the median for transportation of the catalyst, which is controlled by an ...

    By Emtrol LLC - a CECO Environmental Company based in Islandia, NEW YORK (USA).

  • SIGMATEC - Dealcoholization Systems

    SIGMATECDealcoholization-System for wine or beer. Another successful development byAPI Schmidt-Brettenis the SIGMATECprocess, designed for the dealcoholization of beer and wine. This new procedure using continuous vacuum rectification, ensures a gentle removal of alcohol.

    By API Schmidt-Bretten GmbH & Co. KG Office in Buffalo, NEW YORK (USA). from Thermal Systems Product line

  • CompactSpec - Model II - UV-VIS-NIR Spectrometer Systems

    The CompactSpec II is a fast, robust UV-VIS-NIR spectrometer systems in a stainless steel housing (IP54) with an integrated industrial PC and touchscreen TFT monitor.

    By tec5USA, Inc. based in Plainview, NEW YORK (USA). from Spectrometer Systems Product line

  • Optech - Waveform Recorder

    The Waveform Recorder provides waveform capture capability for all ALTM models. Benefits include true ground detection, increased return density, improved target separation distances, and improved classification results. Available as a small strap-on peripheral, the Waveform Recorder is shipped and installed in the field directly by clients ...

    By Teledyne Optech Incorporated Office in Henrietta, NEW YORK (USA). from Airborne Survey - Lidar System Product line

  • MiniWAVE - Microwave Digestion System

    MiniWAVE - A new category of Microwave Digestion; MiniWAVE is a top-loading, compact axisymmetric Microwave Digestion System consisting of a Touch Screen Controller and up to 4 Digestion Modules connected via USB cables. Each Module is able to digest up to 6 samples simultaneously in 75 ml Quartz or 75 ml Teflon® vessels. Modules can be ...

    By SCP SCIENCE Office in Champlain, NEW YORK (USA). from Microwave Digestion Systems Product line

  • AC and DC Duct Canister Fans

    This combination ventilation fan and duct storage unit is constructed of rugged polyethylene. Ideal for use as a one piece ventilation package. Duct canister is securely attached to a lightweight Air System fan. Axial Canister Fans are available in AC or DC, with 6’, 15’, or 25’ of duct installed. The DC fan can be ordered with ...

    By CG Industrial Safety based in Peekskill, NEW YORK (USA). from Confined Space - Ventilation Systems Product line

  • Oil/Water Separators with Deep Sump Basin

    The Deep Sump Basin (DSB) is a complete packaged system consisting of the  Deep Sump Basin with Integral Grit and Pump Lift Chambers, Influent Pump Package  and Model HTC Rectangular Aboveground Oil/Water Separator. The system is designed  to remove free-floating oil, grease and settleable oily-coated solids from a vehicle  ...

    By Highland Tank & Manufacturing Company, Inc. Office in Watervliet,, NEW YORK (USA). from Oil/Sand Interceptors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you