sequential sampling equipment

The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression, and conductivity detection enables fully automatic determination of anions or cations in solutions with low ion concentration.

By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography - MISP Product line

The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression and conductivity detection enables fully automatic determination of anions and cations in solutions with low ion concentration.

By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography - MISP Product line

The 940 Professional IC Vario ONE/SeS/Prep 3 is the intelligent IC instrument with sequential suppression in combination with Metrohm Inline Sample Preparation, e.g., Inline Neutralization or Inline Cation Removal. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...

By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography - MISP Product line

The 940 Professional IC Vario ONE/SeS/Prep 1 is the intelligent IC instrument with sequential suppression in combination with Metrohm Inline Sample Preparation, e.g., Inline Ultrafiltration or Inline Dialysis. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection methods.

By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography - MISP Product line

PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory analysis. Complies with EN 12341.

By ENVEA based in Poissy, FRANCE. from Air Quality Monitoring - Particulates Samplers and Analyzers Product line

The 940 Professional IC Vario ONE/SeS/Prep 2 is the intelligent IC instrument with sequential suppression in combination with Metrohm Inline Sample Preparation, e.g., Inline Matrix Elimination or Inline Calibration. An 800 Dosino can be used for the regeneration of the suppressor. The instrument can be used with any separation and detection ...

By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography - MISP Product line

The Thermo Scientific Aquilos 2 Cryo-FIB is the latest generation of our cryo-DualBeam system. It is dedicated to the preparation of thin, electron-transparent lamellas for high-resolution cryo-electron tomography or MicroED of micro-crystals. 

By Thermo Fisher Scientific, LIMS & Laboratory Software based in Philadelphia, PENNSYLVANIA (USA).

contrAA 800 D is the incredibly flexible all-round talent with an application range unrivaled in AAS. Thanks to its automatic atomizer change contrAA 800 D combines flame-, hydride-/HydrEA- and graphite furnace technique, including solid AA, with all technological advantages of the High-Resolution Continuum Source atomic absorption spectrometry in ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Analytical Instrumentation - Atomic Absorption Spectrometry Product line

contrAA 800 F is the compact High-Resolution Continuum Source atomic absorption spectrometer for flame and hydride technique. It provides fast-sequential and simultaneous multi-element analysis using flame technique in a flexible working range, from traces up to high concentrations. Coupling with the hydride technique enables the determination of ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Analytical Instrumentation - Atomic Absorption Spectrometry Product line

The contrAA 800 G combines the high precision of the transverse heated graphite furnace with all advantages of the High-Resolution Continuum Source Atomic Absorption Spectrometry (HR-CS AAS).

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Analytical Instrumentation - Atomic Absorption Spectrometry Product line

Robust heat-flux differential scanning calorimeters, the DSC-60 Plus series finds applications in research and development and quality control environments for characterization of polymers, pharmaceuticals, foods, etc. The DSC-60 Plus series provides high sensitivity, low noise, and a very stable baseline across the temperature range of -140 to ...

By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA). from Thermal Analysis Instruments Product line

Metrohm has reinvented volumetric Karl Fischer titration: Discover OMNIS. OMNIS is Metrohm’s new, fully integrated solution for water content determination with volumetric Karl Fischer titration. Determining water in samples has never been more convenient, safer, and easier.

By Metrohm AG based in Herisau, SWITZERLAND. from Karl Fischer Titration Product line

Control system for time or volume controlled gas sampling. Control system for the automated collection of gases and particles on adsorption tubes, wash-bottles, or filters. Application areas include emission/immission measurements, TLV value monitoring, landfill gas sampling.

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Gas Sample Collector Product line

This unit consists of 4 parallel reactors with independent gas and liquid feeds. Each reactor features four gas feeds and 1 liquid feed with vaporizer. The reactor tubes can hold up to one gram of catalyst and are stainless steel with operating temperatures and pressures up to 600°C and 30 atmospheres, respectively. All reactor effluents are ...

By Altamira Instruments based in Pittsburgh, PA, PENNSYLVANIA (USA).

This speciation sampler was conceived from the ground up as a sequential sampling platform. Both the four- and 12-channel versions of the device provide sequential sampling capabilities. Four-channel samplers can be upgraded at a later date to the 12-channel configuration.

By Thermo Scientific - LC/MS GC GC/MS based in MASSACHUSETTS (USA). from Air Quality and Water Analysis Product line

The Cerex FT5000C and FT5000CRM are multi-gas FTIR analyzers suitable for continuous emissions monitoring, process monitoring, RATA, Quad J and Quad Z compliance monitoring, and ambient air monitoring applications.

By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA). from Fixed Mount Point Analyzers Product line

Teledyne Leeman Labs offers the UP266MACRO, a large beam, 266 nm, UV Nd-YAG laser ablation system specifically designed for ICP-OES and ICP-MS solid sampling analysis. This general purpose, expandable, laser ablation device incorporates a 30 µm to 750 µm aperture imaged beam delivery system. The control software offers a wide variety of ablation ...

By Teledyne Leeman Labs based in Hudson, NEW HAMPSHIRE (USA). from Spectrometers Product line

The PMx sequential samplers Mod. Giano and Gemini were designed and realized by Dado lab to be more practical, easier to transport and with user friendly interface compared to other available solutions. The common heart to both models is the multi-purpose core unit (MPC) which manages the sequential sampling on a single or double channels.

By Dado Lab SRL based in Cinisello B., ITALY. from Ambient Air Samplers Product line

The sampler CF20 SQ offers the possibility to carry out a sequential sampling on 16 channels, each of which programmable indifferently in low or high flows. This possibility allows the operator to sample dust and gas in a single cycle.

By Aquaria Srl based in Lacchiarella, ITALY. from ACTIVE - Outdoor Samplers Product line

A753 addWAVE Series 4 is a powerful universal data logger that provides high analog resolution, many different I/O channels, lots of memory and extreme flexibility and expandability. It is nonetheless very easy to use and install, and has maintained the low-power approach of previous generations, perfectly capable of operating off our little solar ...

By OTT HydroMet based in Kempten, GERMANY. from Adcon - RTUs Product line