sewage Equipment in Connecticut

35 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Model TP 70 - Electric Submersible Pumps

by HOMA Pumpenfabrik GmbH     Office in Ansonia, CONNECTICUT (USA)

HOMA TP 70 series pumps are suitable for pumping waste water, sewage or effluent. With their 70 mm spherical clearance they are especially able to pump liquids with larger suspended solids like fibres, textiles etc. They are used for various applications in public and private sector, trade and industry.

Model SKB 6, SKB 9 - Packaged Submersible Pump

by HOMA Pumpenfabrik GmbH     Office in Ansonia, CONNECTICUT (USA)

SKB 6 and SKB 9 sumps are pre-assem-bled submersible pump stations, each with an anti-flotation collection sump for the drainage of buildings from below the sewer level. With the minimum of civil work and installation time it is installed, in open ground, outside the building. Installing the SKB 6 or SKB 9 is an effective and economical solution ...

Barracuda - Model GRP 16-50 - Electric Submersible Pumps

by HOMA Pumpenfabrik GmbH     Office in Ansonia, CONNECTICUT (USA)

The installation of conventional sewer systems in areas of low population like small villages, farms or under difficult topographic conditions is often extremely expensive, mainly because of the high cost for large diameter pipework installation. HOMA provides the perfect, economical alternative with Barracuda grinder pump pressure sewage systems. ...

Stancor - Model Avenger Series - Submersible Vortex Pumps

by Stancor Pumps Inc.     based in Monroe, CONNECTICUT (USA)

Features: Non-clogging - No worries about impeller locking. New vortex impeller design minimizes abrasive wear. Impeller clearance needs no adjustment. Virtually maintenance free.

Stancor - Multi-Cut Grinder Submersible Sewage Pumps

by Stancor Pumps Inc.     based in Monroe, CONNECTICUT (USA)

Stancor Multicut submersible grinder pumps are ideally suited for sewage and waste disposal in residential areas of low population. The small bore discharge pipe can be laid to follow the natural contours of the ground.

Low Pressure Water & Wastewater Equipment

by Weston & Sampson Engineers, Inc.     Office in CONNECTICUT (USA)

Barnes Pressure Systems (Prefabricated sewage grinder pumping systems for individual homes and communities. Complete positive displacement and centrifugal pumping systems).

Clearwell Baffle System

by Lamor Corporation Ab     Office in Milford, CONNECTICUT (USA)

ClearwellFloating baffle system is ideal for industrial equipment sewage treatment ponds and pools. Baffle system may be wastewater treatment prior to delivery to the various subsystems in a steel or concrete pool surrounded by a certain path, a certain residence time.

Grease Destroyer

by Roebic Laboratories, Inc.     based in Orange, CONNECTICUT (USA)

GD formulated to control fats, oils and grease from food or your sewage system & pipelines. This product can also be used on hard surfaces such as barbeque grills, utensils, patios, and decks.

Stancor - Model SG Series - Submersible Grinder Pumps

by Stancor Pumps Inc.     based in Monroe, CONNECTICUT (USA)

For residential, industrial and municipal wastewater applications. All solids are reduced to particles allowing the use of small diameter piping connected to the conventional sewage system.

AEROSTRIP - Fine Bubble Diffuser Device

by Aerostrip Corporation     Office in Old Saybrook, CONNECTICUT (USA)

The AEROSTRIP diffuser has been designed as a fine bubble diffuser device with very low energy demand, wich may be safely employed for domestic and industrial sewage treatment worldwide.

Model K-97 - Main Line Cleaner

by Roebic Laboratories, Inc.     based in Orange, CONNECTICUT (USA)

Sewage and other debris tend to accumulate in both sewer lines and in main lines leading to septic tanks. This is a common problem in both old and newer homes, as modern water saving toilets do a poor job of pushing waste out of sewage lines. This troublesome organic build-up can quickly result in clogging problems and back-ups. Roebic's K-97 Main ...

GT-Max Concentrate

by Roebic Laboratories, Inc.     based in Orange, CONNECTICUT (USA)

Designed for all types of sewage and wastewater systems where large amounts of food oils, food residuals and grease occur, and where high flow rates require a highly concentrated product. Apply through floor drain, sink or directly into system manually or by a pump.

ATMOSAIR - Model 500E/500F Series - Self-Contained Stand Alone Units

by AtmosAir Solutions     based in Fairfield, CONNECTICUT (USA)

In duct unit for larger central HVAC systems. Ideal for office buildings, hospitals, schools, nursing homes, childcare facilities, locker rooms, training facilities, stadiums, food processing facilities, manufacturing plants and sewage treatment plants.

Sewer Bypass Pumping

by Griffin Dewatering     Office in Bolton, CONNECTICUT (USA)

As our sewer infrastructure continues to age, rehabilitation is needed to keep it up and running. With Griffin's line of trash handling pumps, contractors can bypass sewage during sewer line repairs - getting tough projects done and keeping the system working for the community that relies on it.

Model SV Series - Non-Clog Electric Submersible Pumps

by BJM Pumps, LLC     based in Old Saybrook, CONNECTICUT (USA)

The SV-pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips & other solids. They are capable of passing solids up to 90% of the outlet diameter.

Water, Stormwater, and Waste Water Pumps

by Weston & Sampson Engineers, Inc.     Office in CONNECTICUT (USA)

Barnes (Sewage, sump, effluent and trash handling pumps. Submersible grinder, cutter and wastewater non-clog pumps). Cornell (Clean water and sewage — vertical, horizontal, close coupled or extended shaft high efficiency pumps. Immersible motors, submersible and dry pit pumps). Crown (Self priming pumps, split case pumps, end suction pumps, single ...

ATMOSAIR - Model 700 Series - Self Contained Stand Alone Unit

by AtmosAir Solutions     based in Fairfield, CONNECTICUT (USA)

The AtmosAir 700 series consists of a locking,wall-mountable enclosure equipped with an ioni-zation system, blower fan, and distribution duct- ing, custom-designed and sized for the applica- tion. The 700 series provides air purification and odor remediation to spaces without an existing HVAC or air distribution system. The 700 series can be used ...

Carbtrol - Air Purification Systems

by Carbtrol Corporation     based in Bridgeport, CONNECTICUT (USA)

CARBTROL offers a full range of air purification systems that include an activated carbon canister with an integral blower. Standard sizes from 90 to 1000 CFM. Units are factory assembled in a complete package. Typical applications include odor control and VOC control from tank vents, sumps, sewage wet wells, fugitive emissions, drum filling ...

ATMOSAIR - Model 800 Series - Self Contained Stand Alone Unit

by AtmosAir Solutions     based in Fairfield, CONNECTICUT (USA)

The AtmosAir 800 series consists of a locking, wall-mountable enclosure equipped with an ioni-zation system, blower fan, and distribution duct- ing, custom-designed and sized for the applica- tion. The 800 series provides air purification and odor emediation to spaces without an existing HVAC or air distribution system. The 800 series can be used ...

Grooved Ductile Iron Pipe

by Fast Fabricators, Inc     based in Bloomfield, CONNECTICUT (USA)

Grooved Ductile Iron Pipe is manufactured for air, water, sewage, oil, and other liquids where owners, specifiers, and contractors express a preference in lieu of flanged fabrication. The joint employs shoulders or grooves fabricated to the pipe to be used in conjunction with a segmented mechanical coupling. The joint may be designed to be ...

Need help finding the right suppliers?

Let the XPRTs do the work for you