sewage treatment system equipment in Maryland

  • Premium

    PWTech - Model FLOCCSEP - Sewage Treatment System

    The FLOCCSEP process represents a totally new way of managing sewage, resulting in maximum cost savings in conventional equipment and greatly minimized environmental contamination.

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA). from Sewage Treatment System Product line

  • Water Treatment

    Awareness and new regulations require industrial and municipal waste water treatment facilities and their holding lagoons to have a lining system to contain contaminants and prevent the pollution of streams and groundwater.

    By Hallaton, Inc based in Sparks, MARYLAND (USA). from Water Treatment Product line

  • Vortex - Model V-2000 - Low-Pressure Sewer Submersible Grinder Pump System (LPSS )

    The V-2000 is truly a fully submersible grinder pump and all electrical components were moved from the pump housing to the control cabinet except the starter capacitor.

    By Vortex Pump LLC based in Owings, MARYLAND (USA).

  • Combi - Packaged Headworks Systems for Sewage and Septage Receiving

    The Combi is an all-in-one headworks solution that integrates fine screening, screenings dewatering and grit handling in a single, pre-fabricated, stainless steel unit. The system is designed for sewage or septage pretreatment at the wastewater treatment plant. All components are engineered for proper interface, low maintenance, optimal throughput ...

    By Parkson Corporation Distributor in Owings Mills, MARYLAND (USA). from Packaged Headworks Systems for Sewage and Septage Receiving Product line

  • Evapco - Model eco-ATWB-H - Hybrid Closed Circuit Cooler

    Dramatically reduced water consumption: Thanks to EVAPCO’s cutting edge finned coil technology, the eco-Hybrid is the ultimate solution for both HVAC and large tonnage industrial process installations seeking the highest dry bulb switchover temperatures, reduced water usage, high peak-load output, and plume abatement. Available with a ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Hybrid Closed Circuit Cooler Product line

  • Premium

    PWTech - Volute Thickener

    The PWTech Volute Thickener is a fully-automated, virtually maintenance-free unit using the 'dewatering drum' design used for the Volute Dewatering Press. The Volute Thickener is perfect for automated sludge wasting from biological processes and thickening prior to storage, digestion, further dewatering, or transport, giving a solids output from ...

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA). from Volute Thickener Product line

  • Integrated Surge Anoxic Mix System (ISAM)

    The ISAM is a total treatment system incorporating BOD, TSS and nitrogen removal along with sludge reduction in an integrated system. Raw (crude) sewage enters a covered anaerobic reactor for pretreatment, sludge thickening and sludge destruction. Complex organic solids undergo hydrolysis to simpler soluble organics which pass to the surge anoxic ...

    By Fluidyne Corporation Distributor in MARYLAND (USA). from Integrated Surge Anoxic Mix System (ISAM) Product line

  • Model ISAM - Sludge Reduction Systems

    Fluidyne is the first company to commercially design, build and operate SBR technology based on the activated sludge process with over 300 plants operating worldwide. Our intimate process knowledge in biological treatment has led to reducing solid content through biological means. The ISAM sludge reduction system from Fluidyne Can be used as a ...

    By Fluidyne Corporation Distributor in MARYLAND (USA). from Sludge Reduction Systems Product line

  • KEE - Model BioGuard - Grease Digester

    The KEE Grease Digester Solution for clear kitchen drains: For many kitchens within schools, pubs, hotels and restaurants, the build up of fat, oil and grease (FOG) is an everyday occurrence, during food preparation and dish washing. It can lead to a mixture of problems, most of which can result in hygiene issues, unhappy customers and lost ...

    By KEE Process Limited Office in MARYLAND (USA).

  • Evapco - Model eco-ATWB-E - Closed Circuit Cooler

    Thanks to EVAPCO's commitment to product development, the eco-ATWB-E line of coolers stands as one of the most water and energy efficient units in the industry. Featuring two water distribution systems and the Ellipti-fin® Cooling Coil, the eco-ATWB-E design allows for three modes of operation: 100% wet, 100% dry, or a hybrid wet/dry mode for ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Closed Circuit Cooler Product line

  • Hydro-Grit - High Efficiency Grit Vortex System

    Fluidyne’s Hydro-Grit grit vortex system removes sand and inorganic material before the wastewater treatment process. Historically one of our most popular and effective products, the high efficiency Hydro-Grit offers the same advantages as the standard Hydro-Grit with improved grit removal efficiencies. Performance data through the ...

    By Fluidyne Corporation Distributor in MARYLAND (USA). from High Efficiency Grit Vortex System Product line

  • Evapco - Model eco-LRWB - Closed Circuit Cooler

    The eco-LRWB’s Ellipti-fin Cooling Coil features CrossCool Internal Tube Enhancement, increasing the internal heat transfer coefficient of the coil and thus the cooling capacity of the unit. The eco-LRWB utilize spirally finned elliptical tubes to increase both wet and dry capacity, and are the ideal solution for indoor applications, ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Closed Circuit Cooler Product line

  • Evapco - Model eco-LSWE - Closed Circuit Cooler

    The eco-LSWE’s Ellipti-fin Cooling Coil features CrossCool Internal Tube Enhancement, increasing the internal heat transfer coefficient of the coil and thus the cooling capacity of the unit. The eco-LSWE utilize spirally finned elliptical tubes to increase both wet and dry capacity, and are the ideal solution for indoor applications, ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Closed Circuit Cooler Product line

  • Acoustic Bubble Spectrometer(ABS )

    The Acoustic, Bubble Spectrometer is a commercially available acoustics based device that measures bubble size distributions and void fraction of bubbles in liquids. The initial efforts to develop the technology were funded by Small Business Innovation Research (SBIR) awards from the National Science Foundation. Continued developments were funded ...

    By Dynaflow, Inc. based in Jessup, MARYLAND (USA).

  • Evapco - Model eco-ATWB - Closed Circuit Cooler

    The eco-ATWB dramatically reduces water and energy consumption by increasing the unit's efficiency in both the evaporative and dry cooling modes of operation. The eco-ATWB’s Ellipti-fin Cooling Coil now features CrossCool Internal Tube Enhancement, increasing the internal heat transfer coefficient of the coil and thus the cooling capacity of ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Closed Circuit Cooler Product line

  • Evapco - Model ATC-DC - Evaporative Condenser

    Thanks to EVAPCO’s cutting edge finned coil technology, the ATC-DC is the ultimate solution for food process and large tonnage industrial process installations seeking the highest dry bulb switchover temperatures, reduced water usage, high peak-load output, and plume abatement. The ultimate in wet/dry performance, every ATC-DC model has been ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Evaporative Condenser Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you