Only show results in Virginia? Ok

Shred Systems equipment

  • Premium

    Lindner Komet - Model 1800 / 2200 / 2800 - Stationary Secondary Shredding System

    Set new standards with our Lindner Komet secondary shredder. Whether you are processing municipal or bulky refuse, industrial or commercial waste, textiles, waste paper or other materials – our Komet ensures smooth processes at all times thanks to its robust design, high-precision tools as well as smart features. Benefit from high efficiency ...

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA. from Stationary Secondary Shredding Product line

  • Premium

    Lindner Apollo - Model 700 / 1000 / 1600 - Stationar Universal Shredding System

    With the Apollo series you are ready to recycle almost anything. Tailored to companies with low to medium material volumes, the machine makes it possible to shred diverse product waste down to defined output sizes in a cost-effective way. The combination of superlative machine technology and smart functions guarantees a high degree of operational ...

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA. from Universal Shredder Product line

  • Shredding Systems

    Husmann shredding systems are designed for shredding large amounts of different materials such as wood, paper, files, EDP-lists, cardboard, plastic materials, tinplate, glass, carcasses, general waste and industrial waste. Their outstanding features are sturdy design, easy operation and high performance. The size of the shredded material is ...

    By Husmann Umwelt-Technik GmbH based in Dörpen, GERMANY. from Grinding Systems Product line

  • Bondtech - Shredding Systems

    Serving the Medical Industry with Quality Products. Bondtech engineers have provided solutions to a wide variety of hazardous waste destruction problems; including PCB Contaminated Materials, Radio-active Waste, Chemical Weapons and Medical Waste.

    By Bondtech Corporation based in Somerset, KENTUCKY (USA).

  • Aerosol - Shredding Systems

    Meltog offers a number of pre-existing solutions for the safe destruction, management and sorting of aerosol cans for either indoor or outdoor operation and for either ODS or non ODS applications. All systems comply with ATEX regulations and they can be additionally adapted to comply with localised, specific environmental requirements or site ...

    By Meltog a Division of MMco. Limited based in Leeds, UNITED KINGDOM. from Waste Management Equipment Product line

  • CentriCut - Model N - Shredding Systems

    The use of the CentriCut N range is recommended in complete fine shredding systems. Its energy efficiency is unsurpassed, downtimes are minimal and changing products including cleaning is carried out within minutes. The machines are identically designed to the normal CentriCut® machines, but do not come with a screw feed. The material arrives ...

    By Nuga Systems AG based in Balgach, SWITZERLAND. from Recycling Solutions Product line

  • Ameri-Shred - Model Series 3, 4 or 5 - Double Cut Shredding Systems

    A double cut system utilizes two strip cut shredders. The primary shredder's cutting assembly is specifically designed to optimize throughput while the secondary shredder provides the security of a smaller cut. These flexible systems can be created using series 3, 4 or 5 shredders.

    By Ameri-Shred Corp. based in Alpena, MICHIGAN (USA). from Cross Cut Paper Shredders Product line

  • Taskmaster - Submerged Propellent Shredding Systems

    These systems use several means and specially designed shredders to reduce solid rocket fuel (propellant) in a fully submerged liquid solution and then separate the discharged solids from the liquid bath.

    By Franklin Miller Inc. based in Livingston, NEW JERSEY (USA). from Engineered Systems - Custom Systems Product line

  • Premium

    Erdwich - Two Shaft Ripper

    When processing electronic scrap, the aim is not merely to ensure the highest levels of process reliability and performance, but to salvage components such as capacitors and batteries intact where possible. Here, the the RM 1350/2 coarse shredder really struts its stuff: with the especially slow-running twin-shaft rotor/shredder system, the ...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY. from Shredding Machines Product line

  • Premium

    Erdwich - Coarse Shredder Reisser for Processing of Electronic Waste

    When processing electronic scrap, the aim is not merely to ensure the highest levels of process reliability and performance, but to salvage components such as capacitors and batteries intact where possible. Here, the the RM 1350/2 coarse shredder really struts its stuff: with the especially slow-running twin-shaft rotor/shredder system, the ...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY. from Shredding Machines Product line

  • Premium

    Erdwich - Hammer Mills

    ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials - as preparation for downstream separation systems - in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical ...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY. from Shredding Machines Product line

  • Premium

    Erdwich - Three-Shaft Shredder

    The uniform shredding of coarse materials: that’s the speciality of the ERDWICH three-shaft shredder. ERDWICH has created the three-shaft design especially for these requirements. Entirely free of clogging and jamming – even with solid materials. Clever, huh?. Absolutely: after all, the three cutter shafts and their individual sets of ...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY. from Shredding Machines Product line

  • Model ECO TDS SS-12-RS - Tire Derived Shreds System (TDS)

    Tire-derived shreds (TDS) are the first primary shreds from scrap tires of all sizes. These first cuts are produced as whole tires (or pre-cut pieces) enter and exit from a primary shredder. These shreds are typically 50-150 mm in size but can range in size after the first cut.  Recirculating the first shreds is available for smaller sizes. ...

    By General Recycling GmbH based in Vienna, AUSTRIA. from System Product line

  • Premium

    Erdwich - Two-Shaft Shredder

    Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more?. The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded ...

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY. from Shredding Machines Product line

  • Cardboard Shredding Systems

    Meltog’s waste packaging solutions not only help you comply with current landfill directives but also ensure complete confidential destruction of sensitive documents. Meltog shredding systems have evolved to accommodate the sophisticated needs of clients whilst complying with government legislation.  Furthermore, as shredding cardboard ...

    By Meltog a Division of MMco. Limited based in Leeds, UNITED KINGDOM. from Waste Management Equipment Product line

  • Badger - Mobile Shredding System

    Badger offers a versatile line of products to meet the ever demanding needs of our customers. With machines that are mobile, semi stationary, stationary, diesel or electric, there is a Badger for everyone.

    By Badger Shredding Products,Inc based in Denmark, WISCONSIN (USA).

  • UNTHA - Model RS50/60/100 - Industrial Shredders and Shredding Systems

    Industrial shredders for difficult recycling applications. This industrial shredder has been tried and tested under difficult conditions is characterized by very high reliability, ability to handle non-shreddable extraneous materials as well as a very broad application range. Its sturdy design and the strong, resistant cutting unit is particularly ...

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA. from Industrial Shredders Product line

  • VERTISA Promed - Medical Waste Pre-Shredding System

    Definition of Problem Managing Medical Waste; The toxic waste is a mass of contaminated waste which may contains syringes, needles, paper, plastics, glass, textiles, cultures pathological waste, blood products, sharps, tissues and infectious materials produced by the medical industry in clinics, hospitals, labs and research centers.

    By VERTISA Medical Waste Technology based in Orlando, FLORIDA (USA).

  • Diamond Z - Model SWG1600 - Traditional Stationary Garbage Shredding Systems

    Unlike traditional stationary garbage shredding systems, the SWG 1600 is completely on-site mobile. Track mounted, and self-propelled, the SWG 1600 can be driven on the working face of the landfill. Ground garbage is deposited directly into the landfill cell, where it can be spread by compactors. The heart of the machine is a high speed Hammermill ...

    By Diamond Z based in Caldwell, IDAHO (USA). from Solid Waste Grinders Product line

  • Premium

    Ferrous Metal Scrap Processing

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Industrial Recycling & Shredding Applications Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you