Only show results available in Connecticut? Ok

silo vent filter equipment

  • Silo venting Filters

    SILO top ventors are cylindrically shaped filter system for venting of pneumatically filled silos. Its stainless steel body contains vertically mounted, POLYPLEAT filter elements. The air jet cleaning system is integrated in the hinged weather protection cover. Dust separated from the air flow by special POLYPLEAT filter elements drops back ...

    By Jeddah Filters based in jeddah, SAUDI ARABIA.

  • Model D 171, 163 & D 209 - Silo Venting Filter

    Silo Venting Filters are specifically designed to vent silos fed with powdered products primarily from road tankers. Capable of filtering the product from the air during the conveying period and the air surge at the end of the cycle. The filter is self maintaining returning product back into the silo via an automatic reverse pulse compressed air ...

    By Dustcheck Limited based in Fenton, UNITED KINGDOM. from Silo Venting Filter Product line

  • Silo Vent Filter Receiver

    This PNEUMATI-CON Silo Vent is essentially the upper section of a filter receiver that can be mounted atop an existing silo or other large vessel, into which material can be conveyed.

    By Flexicon Corporation based in Bethlehem, PENNSYLVANIA (USA). from Silo Vent Filter Receiver Product line

  • Silo Filter Vents

    Silo Filter Vents are used to vent silos into which material is conveyed. As the material fills the silo, it displaces air, which must be vented without loss of product. Product collected on the filter bags is returned to the silo by shaking the bags after filling has been completed. Silo Filter Vents are available in two series

    By Griffin Filters LLC based in Liverpool, NEW YORK (USA). from Silo Filter Vents Product line

  • Cartridge Silo Vents

    Designed to maximize efficiency while minimizing maintenance, Griffin’s Cartridge Silo Filter Vents are a compact solution for a wide-range of dust collection applications. Our ultra-efficient cartridges capture 99+% particulate emissions down to 1 micron from the silo while our powerful pulse jet system keeps the filters performing at their ...

    By Griffin Filters LLC based in Liverpool, NEW YORK (USA). from Cartridge Silo Vents Product line

  • Model N - Silo Collector

    Silo collector series N is primarily designed for dedusting of silos and bunkers that are used for the storage of bulk solids (cement, grain, ash, lime, clinker, food products etc.).  Silo collectors for silo dust suppression are massive cylinder shaped pressure-resistant boxes. Silo venting filters are not equipped with a fan in ...

    By Hennlich Engineering s.r.o. based in Litomerice, CZECH REPUBLIC. from Silo Collector Product line

  • Bin Vent Filters

    CAMCORP's Bin Vent Filters have all of the features and benefits of the Pulse-Jet Baghouses or Cartridge Filters but they do not typically incorporate a hopper. They are designed to mount directly onto a piece of equipment that needs venting such as storage silos, mixers, work bins, belt conveyors, etc.

    By CAMCORP, Inc. based in Lenexa, KANSAS (USA). from Bin Vent Filters Product line

  • Beltech - Bin Vents

    The Beltech line of silo bin vent dust collectors is an efficient, low maintenance medium-pressure pulse cartridge style dust collection system, manufactured to your exact specifications. This bin vent design utilizes the state of the art technologies in filter design, cleaning system, compressed air efficiency and filter installation and ...

    By Beltech Engineering & Associates Inc. based in Burlington, ONTARIO (CANADA). from Bin Vents Product line

  • Model SPJ-BV - Bin Vent Collector

    Scientific Dust Collectors’ Supersonic Pulse Jet Bin Vent (SPJ-BV) Collector is designed specifically for storage tanks, silos, work bins, and material receivers. It employs the patented supersonic nozzle cleaning system which allows the collector to operate at higher air-to-cloth ratios, lower pressure drops, and provide longer filter life. ...

    By Pennvint based in Union, NEW JERSEY (USA). from Bin Vent Collector Product line

  • FLEXTO - Model P80 - Filter Unit

    The Herding FLEXTOP80 is used for the venting of silos and storage tanks. The housing consists of a rugged, cylindrical steel structure. A horizontal slotted plate divides the housing into a lower raw gas compartment and an upper clean gas compartment. Located inside the clean gas compartment is a cleaning unit. Air leaves the clean gas ...

    By Herding GmbH Filtertechnik based in Amberg, GERMANY. from Filter Unit Product line

  • Bin Vent / Dust Collector

    Cyclonaire brand bin vents and dust collectors provide excellent filtration at destination points such as bins, hoppers, and silos. Installation is quick and easy with flanged outlet for dust discharge. Automatic timers clean the filter media with pulse jet reverse flow air; dropping retained material back into the process. Wide array of sizes ...

    By Cyclonaire Corporation based in York, NEBRASKA (USA). from Bin Vent / Dust Collector Product line

  • Model Pulse Jet - Roof Access Bin Vents Unit

    For applications requiring 59 to 1033 ft2 of cloth area per unit with 21', 41', 56' long filters. LIBERATOR PVR bin vents bring pleated filter technology to container venting and dust recovery. LIBERATOR PVR bin vents provide additional filter surface area in a compact design for high efficient applications involving storage bins, silos, or ...

    By Schust Engineering, Inc. based in Auburn, INDIANA (USA). from Roof Access Bin Vents Unit Product line

  • Scientific Dust Collectors - Model SPJ-BV - Supersonic Pulse Jet Bin Vent Collector

    Scientific Dust Collectors' Supersonic Pulse Jet Bin Vent (SPJ-BV) Collector is designed specifically for storage tanks, silos, work bins, and material receivers. It employs the patented supersonic nozzle cleaning system which allows the collector to operate at higher air-to-cloth ratios, lower pressure drops, and provide longer filter life. We ...

    By Scientific Dust Collectors based in Alsip, ILLINOIS (USA). from Supersonic Pulse Jet Bin Vent Collector Product line

  • Pulse Jet - Model PVB - Bottom Access Bag Filters

    For applications requiring 17 to 432 ft2 of cloth area per unit with 3', 4', 6', or 8' long filter bags. LIBERATOR PVB models feature bottom access design, ensuring safe filter maintenance from silo-top elevation. PVB bin vents incorporate a hinged access door with easy-grip zinc-plated handles allowing tool-less entry. Our OEM venturi design ...

    By Schust Engineering, Inc. based in Auburn, INDIANA (USA). from Bottom Access Bag Filters Product line

  • Pneumatic Conveying Systems

    IAC engineers have over 200 years experience designing pneumatic conveying, dust collection, and bulk material storage systems for a wide variety of industries. IAC’s experience in all these required areas makes us the perfect Original Equipment Manufacturer partner for your project.IAC can provide design assistance, Blower Packages, Bin ...

    By Industrial Accessories Company based in Mission, KANSAS (USA).

  • Modupulse Dust Collectors

    DCS Modupulse range of reverse pulse jet dust collectors are providing efficient collection of dust in every state of Australia in applications as diverse as small silo vents and laboratory systems to large scale systems in foundries and timber industry plants. With our extended surface filters, we can produce an economical solution without ...

    By Dust Collection Services Pty Ltd based in Narangba, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you