single gas detection Equipment available in Gambia

Available in Gambia| Near Gambia
360 Results found

We couldn't find any single gas detection equipment in Gambia

Here is a list of results available in Gambia

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: single gas detection ×

  • Available in: Africa ×

  • Available in: Gambia ×

Capital Controls ADVANCE - Model Series 1610B - Single Point Gas Detector

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

Capital Controls ADVANCE™ Single Point Gas Detector, Series 1610B provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment. ADVANCE™ gas detectors are ideal for protection of personnel and property wherever chlorine or sulfur dioxide is unloaded, stored or used. Highly sensitive, the detector ...


Compod - Model 100 Series - Programmable Control Module

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Compod is a programmable control module for Sierra Instruments' 100 Series that makes Smart-Trak even smarter. The Compod mounts to any Sierra Smart-Trak Model 100, converting the instrument's internal RS-232 communications into multi-drop RS-485/MODBUS RTU. With MODBUS, multiple instruments can be daisy-chained over a single network. When used ...

ACME - Model CO2-EN Series - Carbon Dioxide Monitor-Controller

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

Single-point sample-draw CO2 monitoring for indoor air quality or industrial applications utilizing infrared sensor technology. Digital readout of PPM CO2 levels, up to 4 relay outputs, analog voltage/current output signal. Different detection ranges available.

ACME - Model CO2-2000 - Carbon Dioxide Detection & Control Unit

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million range (PPM)and is ideal for applications ranging from conference rooms to home gyms. The CO2-2000 is easy to install and support. Measurement output is via a 4-20 mA current loop or a 0-10V interface. Low power consumption makes the CO2-2000 ...

ACME - Model UN-ECH Series - Uniset Stand-Alone Gas Monitor

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

UNISET is a single-point stand-alone gas monitor for a number of toxic and flammable gases as well as oxygen deficiency. It utilizes state-of-the art sensor technology: electrochemical for toxic gases and oxygen; catalytic bead for combustibles. The UNISET has up to four SPDT relay outputs fully user-configurable to operate at different thresholds ...

Protea - Model AtmosFIRi - Multi-component FTIR Gas Analyser for Continuous Measurement

by Protea Limited     based in Middlewich, UNITED KINGDOM

atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use, portable and a very low cost product that provides real-time online measurement suitable for plant systems. Often, gas monitoring applications require high concentration and quick response, and low level detection limits are not necessary. ...

GPro - Model 500 - Oxygen Gas Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The GPro 500 Oxygen TDL is a unique analyzer that fits anywhere in your process thanks to the broadest range of in situ and on-line process adaptions.

ACME - Model TW-ECH - Twinset Stand-Alone Dual Gas Monitor

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The TwinSet is a stand-alone dual-gas detection unit. In its standard configuration the TwinSet wil have (1) built-in CO sensor and (1) remote sensor that can be for any one of the three gases listed, namely, CO, NO2 or Combustible gas (CH4 C3H8). The TwinSet is a 'system-in-a-box' that provides dry contacts for the activation of fans, dampers and ...

ACME - Model REF-IR-ST - Refrigerant Leak Sensor/Controller

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The ACME REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0 to 1000PPM measuring range and operating temperature and ...

GPro - Model 500 - Carbon Monoxide Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The most accurate and reliable instrument for efficient combustion control applications. The GPro 500 CO TDL is the most accurate and reliable instrument for efficient combustion control applications. By allowing trim control operation mode, the excess air limit can be lowered and adapted to changing conditions without jeopardizing safety.

UniSolv - High purity solvents for Organic Trace Analysis

by Merck Millipore     based in Darmstadt, GERMANY

UniSolv® for Organic Trace Analysis - Large retention time range (even low-boiling substances can be reliably detected) - Highest possible purity and minimal signal-to-noise ratio - Best possible batch consistency avoiding analysis repetition, time and cost saving - Specified for GC-Electron Capture Detector (ECD), GC-Flame Ionization Detector ...

Capital Controls ADVANCE - Model Series 1620B - Multipoint Gas Detector

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

Capital Controls ADVANCE Multipoint Gas Detector Series 1620B provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment in up to eight (8) distinct locations. The modular gas detection system consists of a single indicator/receiver and a sensing module for each location (up to eight locations) for ...

INNOVA 1316 - Multi-Gas Monitor

by LumaSense Technologies, Inc.     based in Santa Clara, CALIFORNIA (USA)

The Multi Gas Monitor INNOVA 1316 is the first in a new family of gas analysis instruments for use in a wide variety of industrial applications. The instrument provides an affordable, highly reliable, and very accurate multi-gas solution that can be used in numerous applications e.g.: Fermentation Monitoring, Refrigerant Leak Detection, Landfill ...

Gasmet - Model DX4040 - Portable Ambient Air Analyzer

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet's DX4040 FTIR (Fourier Transform Infrared Spectroscopy) gas analyzer can detect 25 different gases simultaneously with results in just 25 seconds. The DX4040 has a library of measurable gases that can be changed easily through the systems interface. It can also be used for VOCs, TICs, waste anesthetic gases and unknowns. 

BevAlert - Model 8900 - Gas Chromatograph Analyzer

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The BevAlert Model 8900 is a specialized instrument utilized by specialty gas manufacturers and the food and beverage industry to monitor trace volatile organic compounds or total sulfur in CO2 used in carbonated beverages (water, carbonated drinks, beer, etc.) as well as quick frozen foods. The Series 8900 is a multi-purpose gas chromatograph ...

TAPI - Model T803 - CO2/O2 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T803 CO2/O2 analyzer combines the non-dispersive infrared measurement principle within the model T801 and the proven paramagnetic measurement principle within the T802 in to a single analyzer. Both technologies give accurate and reliable results combined with product longevity, providing the best price performance value on the market.

Baseline - Model Series 8900 - Gas Chromatograph Analyzer

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Baseline Series 8900 is a multi-purpose gas chromatograph designed to continuously monitor single or multiple gas components in a wide range of applications. The analyzer is microprocessor based and contains powerful embedded firmware. This makes it an online instrument with GC technology that is virtually transparent to the end user. There ...

SMART - Model MT500 - Gas Detector with Single Channel Transmitter

by Interactive Monitoring Excellence Ltd (IMX)     based in Chiasso, SWITZERLAND

SMART MT500 is the result of OVER HALF CENTURY experience made by Cav.(Sir)Bardoni in Gas Detection Design and Developing of products and applications to protect people and plants against fire and gas hazards.The design and features of MT500 represent 'the state of the art' for Toxic and Combustible/Flammable Gas Detection. More than 20 years of ...

DeTect MERLIN - Detect & Deter Bird Control Radar System

by DeTect, Inc.     based in Panama City, FLORIDA (USA)

The MERLIN detect & deter bird control radar system is the most advanced and proven radar system for continuous monitoring of user-defined bird and wildlife control zones and automatic activation of bird deterrent devices to prevent birds entering restricted areas. The Canadian Association of Petroleum Producers (CAPP) in 2012 presented a ...

NEO Monitors - Model LaserGas™ III SP - Single Path Analyser for Oxygen

by NEO Monitors AS     based in Skedsmokorset, NORWAY

LaserGas III Single Path analyser for oxygen is designed for service in hazardous areas. Based on our third generation LaserGas electronics, the entire instrument is built into compact flameproof enclosures, making it operative in zone 1 and class l division 1 areas. The LaserGas III SP is our most reliable gas sensor with all electronics designed ...

Related Terms for single gas detection

Need help finding the right suppliers?

Let the XPRTs do the work for you