Only show results available in Connecticut? Ok

slide gate equipment

  • Model PE - Slide Gate

    Simple and Effective Design. Long lasting UHMW  polyethylene guides and seals. Economical. Our most widely utilized gate.

    By Custom Conveyor Corporation (CCC) based in Rogers, MINNESOTA (USA). from Gates Product line

  • Model Secure-Trac - Slide Gates

    Secure-Trac® internal roller chain link cantilever slide gates combine the highest quality workmanship and material to assure years of maintenance free service. Fully enclosed rollers eliminate 'pinch points: found on your conventional steel cantilever gates.

    By Oldcastle, Inc. based in Atlanta, GEORGIA (US) (USA).

  • Miller - Slide Gate

    Roller bearing suspended - no track to jam - for easier opening, especially when loaded. Option: Crank Side Gate system is also available if desired.

    By Miller Hoppers based in Edmonton, ALBERTA (CANADA). from Miller Hoppers, Bins & Steel Floors Product line

  • Slide Gate

    Slide gates are used as locking, metering and safety components below dosing and in process engineering systems of the bulk material technology. Our slide gate series(engineered at Kreisel) is made for extreme and complicated operating conditions. The specific design of the KREISEL slide gates is based on the system-specific operating conditions ...

    By KREISEL GmbH & Co. KG based in Krauschwitz, GERMANY. from Other Products Product line

  • WACO - Slide Gates

    WACO slide gates are used extensively within treatment plants to control the flow of water into tanks or through channels and troughs. Standard gates feature 1/4 in. thick aluminum slide plates and handwheel or electric motor operators. Poly-Glide ultra high molecular weight (UHMW) polymer bearing bars integrated into the extruded frames minimize ...

    By WACO Products, Inc. based in Baltimore, MARYLAND (USA). from Environmental Products Product line

  • Model 11 - Slide Gate

    Slide Gate with elastomer seals. Dimensions Square or rectangular openings from 200mm to 3048 mm 8' to 120'. Materials Stainless steel (304 or 316 )Galvanized or painted Aluminum.

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Slide Gates Product line

  • Slide Gates

    Slide Gates consist of a flat structurally reinforced gate leaf with polymer bearing surfaces and perimeter seals for operation vertically within a gate frame. Slide gates may be operated with hydraulic cylinders or a screw stem system using manual gearboxes or electric actuators.

    By Steel-Fab, Inc. based in Fitchburg, MASSACHUSETTS (USA). from Gates Product line

  • Slide Gates

    Slide gates are flow control devices that consist of a frame, slide and operating mechanism. Slide gates are provided with seals along the sides and across the invert of the opening and they are typically used to stop flow, control flow or control level in a basin or a channel. Slide gates offered by RWG are outfitted with durable UHMWPE ...

    By RW Gate Company based in Troy, NEW YORK (USA).

  • Model SL - Slide Gates

    JPT SL slide gates are directly compatible with the JPT chain conveyors. The square gate has a flange mounting, and the circular structure has a std gravity pipe connexion. The JPT SL slide gates are available as motor driven or pneumatics operated with an SMC cylinder. The slide plate is bearing supported  onto the slide gate structure with ...

    By JPT-Industria Oy based in Ilmajoki, FINLAND.

  • Model 5 - Slide Gate

    Slide Gates With Elastomer EPDM Seals. Dimensions  Square or rectangular openings from 200mm to 1800 mm8' to 72'. MaterialsStainless steel (304 or 316) Galvanized or painted Aluminum.

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Slide Gates Product line

  • Model 10 - Slide Gate

    Dimensions Square or rectangular openings from 200mm to 1600 mm 8' to 62'. Materials Stainless steel (304 or 316) Galvanized or painted Aluminum.

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Slide Gates Product line

  • Model Type 2 - Slide Gate

    Slide Gate Type II: Type II is a wedge-shaped slide gate with a 4-sided seal from NBR. Type II has 4 pcs. of adjustable wedges. Type II is produced with inside measure = B up to 2,000 mm and in heights = H up to 2,000 mm. Pressure from the front and rear 6 mVs. The gate frame is either bolted directly onto concrete or onto a concreted-in frame ...

    By Gerhardt Christensen A/S based in Storvorde, DENMARK. from Slide Gates Product line

  • AgrosysEurope - Model AS0010200 - Sliding Gates

    Ideal product for sheep. The products come in different shapes and dimensions. Check out particular products, technical specification and our competitive prices.

    By AgrosysEurope based in Dalby, DENMARK. from Sheep Sliding Gates Product line

  • Slide Gate

    A slide gate is the simplest type of flat gate. It consists basically of a gate leaf that slides along guides embedded or fastened to the concrete. Slide gates may be made of timber, stainless steel or carbon steel.

    By Mecan-Hydro based in Granby, QUEBEC (CANADA). from Gates & Operating systems - Gates Product line

  • FFI - Slide Gates

    Fiberglass Fabricators manufactures slide gates and stop logs for a wide variety of wastewater management applications. Ranging in size from 12 inches square to 10+ feet, FFI has the ability to fit the requirements of a wide range of gate applications. As a custom fabricator, FFI can accommodate the unique requirements of both new constructions ...

    By Fiberglass Fabricators, Inc. based in Smithfield, RHODE ISLAND (USA). from Municipal Products Product line

  • Slide Gates

    Slide gates are used to control the discharge of bulk materials from hoppers, bins, silos or conveyors. Slide Gates consist of a rigid frame mounted to the bottom of a storage device or conveyor. A slide plate is located inside the frame that either opens or closes against the flow of material. The slide plate can be moved by manual, pneumatic, ...

    By KWS Manufacturing Company Ltd. based in Burleson, TEXAS (USA). from Other Products Product line

  • Waterman - Model A-200 - Aluminum Slide Gate

    Waterman aluminum gates are especially suitable for corrosion resistant, rust-proof demands. Aluminum gates have optimum sealing against leakage using UHMW-PE sliding and seating surfaces. Waterman can provide aluminum gates in different sizes for circular, square and rectangular openings to suit customer’s application.

    By Waterman Industries of Egypt based in Cairo, EGYPT.

  • Roller Slide Gate

    Rollers/cam followers standard. Neoprene rubber seals OR UHMWP seals. Rack & Pinion or Acme thread stem design. Rack & Pinion with side mount electric actuators reduce the gate footprint allowing the gates to be placed closer together than an Acme thread rising stem design (which takes 3x gate length).

    By Custom Conveyor Corporation (CCC) based in Rogers, MINNESOTA (USA). from Gates Product line

  • Slide Gate Drives

    Andco actuators are 1 ph/120v and come with; {2) built-in limit switches, face flange mounting bracket and explosion Proof enclosure.

    By Premier Components Incorporated based in Alma, MICHIGAN (USA). from Mill Accessories Product line

  • YPAB - Slide Gate Dampers

    Dampers for on-off or regulating of air and flue gases in tough industrial environments with a lot of dust.

    By Yrjas Dampers AB based in NYLAND, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you