We couldn't find any slide gate equipment suppliers or service providers located in North Korea

Here is a list of equipment results with suppliers serving North Korea

slide gate equipment available in North Korea

  • Premium

    GPE - Model LA156-723 / 3315-10061 / RLA156-538 - ECLM Sensors

    GPE provides a variety of sensor heads for the Series 2100 Measurement System. The easy-to-install sensor heads continuously monitor the level and automatically communicate to the GPE electrohydraulic control system, which modulates a tundish slide gate or stopper rod to maintain a desired value.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from ECLM Sensors Product line

  • Jet-Flow Gates

    Jet-flow gates are similar to high pressure bonneted slide gates and are used as regulating gates under free or submerged discharge conditions. The combination of a circular seat ring and floating seal ring upstream of the gate leaf concentrate the discharge flow into a jet with minimal cavitation or vibration. Jet Flow Gates are typically ...

    By Steel-Fab, Inc. based in Fitchburg, MASSACHUSETTS (USA).

  • Undertailgate Chip Spreader

    The Concord undertailgate chip spreader is a simple method to evenly spread aggregate up to 10 feet wide and can be easily transferred between trucks, with an adjustable sliding full width main door and individual 12 inch wide cutoff gates, a Concord chip spreader allows material output to be adjusted for not only quantity, but also location.

    By Concord Road Equipment Mfg. Inc based in Painesville, OHIO (USA). from Undertailgate Chip Spreader Product line

  • Accupanther - Model AP01 - Slide Gate Valve Devices

    Slide Gate Valve Devices for buried slide valves an above floor hydrants. Voltage: Accu 20 V

    By elomat GmbH based in Sasbach, GERMANY. from Slide Gate Valve Devices Product line

  • Handymat - Model 230 VAC/ HY01 - Slide Gate Valve Devices

    VAC/ HY01 - Slide Gate Valve Devices for hand wheels and buried slide gate valve. voltage: 230 V. Power: 1200 W

    By elomat GmbH based in Sasbach, GERMANY. from Slide Gate Valve Devices Product line

  • Slide Gate with Control

    Slide gate with control produced by our company is designed for control (Open/Closed) of downflow transport routes, or for discharging loose materials (products), from containers, conveyors, and silos in feed mills and grain silos. The slide gate is not intended for feeding materials! The Machine is designed for integration into ...

    By Strebl Energy Pte Ltd based in SINGAPORE. from Slide Gate with Control Product line

  • Deimos Ultra - Model BT A - Motors for Sliding Gates

    Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration. Range of operators for sliding gates weighing up to 600 Kg. Maximum leaf speed up to 16 m/min. Newly designed magnetic limit switch for quicker installation; precise and perfectly integrated with architecture of site. Residential use. Control unit designed for ...

    By Bft based in Stockport, UNITED KINGDOM. from Motors for Sliding Gates Product line

  • Dry Hopper Container

    Dispense measured amounts of dry products with ease and accuracy. Our patent-pending, Powder-Saver dry hopper container stores dry products in a proprietary hopper and dispenses the powders in accurate, measured amounts through a slide gate valve. Precise batches and shots put an end to material waste. The hopper cone is designed at the ideal ...

    By MODRoto based in Madison, INDIANA (USA).

  • Golden Harvest - Model GH-40 & GH-44, GH-46 - Aluminum & Stainless Steel Slide Gates

    Golden Harvest Inc. Fabricated Slide Gates are the industry standard for price and performance. UHMW seating faces in guide grooves and neoprene face seals provide for low leakage solutions at modest head levels. The resilient P-bulb seal design provides for a low leakage closure.

    By Golden Harvest, Inc. based in Burlington, WASHINGTON (USA). from Aluminum & Stainless Steel Slide Gates Product line

  • Model CC Series - Channel Penstock

    Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.Used for on-off or control applications in open channels.Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads.Actuator: ...

    By Orbinox based in Anoeta, SPAIN. from Channel Penstock Product line

  • Slide Gate Refractories

    VESUVIUS is the largest producer of slide gate refractories worldwide offering an extensive range of ceramic and carbon bonded slide gate refractory materials for a wide range of applications.

    By Vesuvius plc based in London, UNITED KINGDOM. from Slide Gate Refractories Product line

  • Model BU Series - Bonneted Gates

    Completely enclosed rectangular-port sliding gate for regulating and closing flow through the outlet works of dams. They are designed to be embedded (except the actuator) in concrete after installation. Robust fabricated construction of carbon steel, with high-performance bronze or stainless steel seats.

    By Orbinox based in Anoeta, SPAIN. from Bonneted Gates Product line

  • YPAB - Slide Gate Dampers

    Dampers for on-off or regulating of air and flue gases in tough industrial environments with a lot of dust.

    By YPAB Dampers International AB based in Kramfors, SWEDEN.

  • Rodney Hunt - Bonneted Slide Gates

    Bonneted Slide Gates are fabricated gates for high head (flow rate) dam inlet-outlet and turbine bypass applications. Heads up to 500’ (150M) with a maximum velocity of 115 Ft/Sec (35M/Sec). Carbon or stainless steel construction. Bronze or stainless steel seat. Proven performance in installations throughout the world.

    By Rodney Hunt Company - VAG Valve and Gate Group based in Orange, MASSACHUSETTS (USA).

  • Solids Outloading Systems

    Claro designs and manufactures fully-automated outloading systems for wastewater screenings, grit, sludge, and a wide variety of other materials. Backed by over 25 years of design and applications experience, Claro systems fill material bins or truck trailers evenly, without spillage or splashing, and to precise volumes, levels, or weights all ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids Outloading Systems Product line

  • Horizontal Chain Paddle

    Available in 90- to 400-tons-per-hour capacities, the Horizontal Chain Paddle Conveyor features UHMW paddles, open barrel chain, stainless steel slide gates, stainless steel covers, 3' poly rollers on 36' centers. The system can be used under roof or on top of roof. The Overhead version is available in an over-roof design and in a design for ...

    By Yargus Manufacturing, Inc. based in Marshall, ILLINOIS (USA). from Horizontal Chain Paddle Product line

  • Bonneted Gates

    Bonneted Gates are slide gates in self-contained pressurized steel bodies that embed directly in the dam structure as part of the up and downstream water passage. Accordingly, they do not require gate slots that extend up to the top of the dam. They are typically hydraulically operated with the cylinder mounted to the gate bonnet cover and are ...

    By Steel-Fab, Inc. based in Fitchburg, MASSACHUSETTS (USA). from Bonneted Gates Product line

  • Model C560 - AWWA Heavy Duty Cast Slide Gates

    WATERMAN HEAVY-DUTY CAST IRON SLIDE (SLUICE) GATES are used in applications where safety and reliable performance are essential (dams, tidal environments, water treatment plants) and where outstanding product longevity is desired. Waterman cast gates are preferred for high-head (up to 200′) and high debris (water treatment) environments as ...

    By Waterman Industries based in Exeter, CALIFORNIA (USA). from AWWA Heavy Duty Cast Slide Gates Product line

  • Gate Valve

    BAF Gate valves are designed to meet various applications in the chemical, petrochemical, upstream storage and power industries. BAF design covers wedge type as well as parallel slide gate valves towards the latest international standards and can be supplied in a large variety of ferrous, non ferrous and alloy materials. Packing seal arrangements ...


  • Model KSA-MD 100 - 1500 series - Medium Duty Penstocks

    KWT penstocks are available in various designs and are used  in surface, sewage and process water systems. This sluice gate is a tried and tested penstock model, as it has  been a core product for many years. The KSA-MD sluice gate is a spindle operated and reinforced  sliding plate that shuts off a round or square opening; it moves ...

    By KWT Group/ KWT International based in Biddinghuizen, NETHERLANDS. from Medium Duty Penstocks Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you