Sludge equipment in Oklahoma

  • SperryMax - Ultimate Filter Press Sludge Drying System

    Sperry's SPERRYMAX(r) Filter Press Sludge Drying System eliminates secondary operations and product variations with repeatable moisture levels from cycle to cycle. Pathogens, air pollutants, and disposal costs are greatly reduced, and rapid heat transfer rates reduce the drying cycle.

    By D. R. Sperry & Company Office in OKLAHOMA (USA). from Sludge Dryers Product line

  • Sperry HydryMax - Continuous Feed Sludge Dryer

    Sperry's HYDRYMAX(r) Sludge Dryers are designed to meet your needs. Waste solids are reduced to a powder dry residue. Complete dehydration results in bulk weight and volume reduction of 75 percent and more. Immediate substantial savings are realized through lower disposal/handling costs. Additional long term benefits can be realized through ...

    By D. R. Sperry & Company Office in OKLAHOMA (USA). from Sludge Dryers Product line

  • SLUDGE TANKS

    World Water Works’ Sludge Tank design provides decant capabilities and storage for sludge prior to hauling or dewatering. Cone bottom fiberglass tanks are the preferred material of construction for purposes of longevity and are used for tank capacities under 10,000 gallons. For tanks greater than 10,000 gallons in capacity, World Water Works ...

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA).

  • Integrated Fixed Film Activated Sludge (IFAS)

    Integrated Fixed Film Activated Sludge (IFAS) process is a state-of-the-art biological process used in treatment of municipal and industrial wastewaters for BOD removal, nitrification and denitrification. The process is a hybrid of suspended growth and fixed-film (attached growth) process and may be viewed as a combination of Act

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA).

  • Cooling Tower Cleaning

    The diagram below shows a sludge removal system to clean the basin of a refinery cooling tower. This prevents fouling problems that can be caused when sludge in the basin is transferred to the cooling water lines and heat exchangers in the process unit.

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Applications our products can be used in Product line

  • Air Diaphragm Pumps

    Ideal Usage: Sludge and slurries, flood control and dewatering situations associated with refineries. Applications where compressed air is available.

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Pumps Product line

  • Model 10K - Roll-Off Tanks

    Wastewater treatment plants, tank cleaning, and sludge projects. Stormwater and leachates. Smaller jobs or where space is a problem.

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Steel Tanks Product line

  • Phase Separators / Turbo Roll-Off Boxes

    Separating and dewatering sludges, slurries and waste streams. Liquid drains through or can be pumped from the installed filter media panels and out of the container via discharge ports

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Roll-Off Boxes Product line

  • Dewatering Roll-Off Boxes

    Freeing water from sludge and slurry. Perfect for non-pumpable dewatering situations. Sewer and other cleanouts. Stainless steel screen with filter cloths for customized needs. Gasketed door for full compression sealing. 

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Roll-Off Boxes Product line

  • 220 Barrel Tanks

    Used for sediment settling for construction projects. Chemical sludge mixing. Feed system for dewatering. Smooth interior wall for easy cleanout. Urethane exterior coating. Skid mounted.

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Specialty Equipment Product line

  • Intermodal Roll-Off Boxes

    Highway, waterway, and railway transport. Large environmental clean-up projects. Stores sludge and solid waste. Most offer 4-wheel maneuverability. Gasketed door with rear door binders for full compression sealing. 

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Roll-Off Boxes Product line

  • SKO - Horizontal Pump with Three Channel Impeller

    The Ruhrpumpen Type SKO is a horizontal centrifugal pump with three-channel impeller for dry installation and universal use, suitable for pumping activated sludge as well as mixed, rain and raw water with upstream screen.

    By RUHRPUMPEN GmbH Office in Tulsa, OKLAHOMA (USA). from Water & Wastewater Product line

  • Model PFS-WM - Wedge Type Flow Meter

    The PFS-WM WedgeType™ excels where others fail, accurately measuring highly viscous, rough, or solids-bearing fluids and slurries, as well as gas or steam. This meter is even ideal for asphalt, tar-sands, tracking fluids, spent water, sludge, cement, and other harsh industrial uses.

    By Primary Flow Signal, Inc. (PFS) Office in Tulsa, OKLAHOMA (USA). from Wedge Type Flow Elements Product line

  • Baker Vacuum Roll-Off Boxes

    Projects using vacuum trucks to move sludge and solids: auto manufacturing, paint booths and paper mills. Keeps vacuum trucks or other air movers operating full time. Gasketed door for full compression sealing. 

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Roll-Off Boxes Product line

  • www/DEWATERING SYSTEMS

    World Water Works manufactures several different dewatering technologies. Depending upon the type of sludge, quantity, oils and grease content, and the desired dryness, one of three different types of dewatering devices will be specified in the equipment list section for optimum performance. The www/Plate and Frame unit provides for consistent ...

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA).

  • Internally-Fed Rotary Screen (IRS)

    The Internally-fed Rotary Screen is designed for versatility and can handle high flows and/or high solids. Typically, the IRS provides the driest solid versus the other www/PRESCREENs. In fact, this system can be used for thickening sludges containing 0.5% - 3% solids to 3% - 15%, depending on the type of sludge. The system operates by feeding the ...

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA). from Screening Product line

  • www/SOLIDIFIER

    The www/SOLIDIFIER is a plate frame filter press. This product offers excellent dewatering, simple operation, and years of reliable service. With full automation capabilities, operator time is limited primarily to press set-up, cake removal, and basic housekeeping. Our product range covers overhead, side-bar and specialized filter press designs. ...

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA).

  • Specialty

    If your needs require the storing or hauling of extremely caustic or acidic materials, there's a Baker solution that is right for you. BakerCorp is the first choice for environmentally sensitive liquid and solid containment challenges, and the broader needs of construction and industrial companies. Baker solutions are cost effective, labor ...

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Specialty Equipment Product line

  • Dissolved Air Flotation - DAF

    Dissolved Air Flotation (DAF) technology is the process where suspended solids, oils & greases, and other impurities are separated from water slurries by a process of dissolving air into water. Micro-bubbles interact with the particles to cause them to float to the surface of a vessel where they are skimmed and separated.

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA).

  • Roll-Off Boxes

    BakerCorp roll-off boxes provide the perfect solution for any solids containment requirement. From Dewatering Boxes to efficient separators, any application that requires the maintenance or transportation of hazardous waste can rely on these flexible boxes. With the widest variety of boxes and separators in the industry, BakerCorp is the company ...

    By BakerCorp Office in Moore, OKLAHOMA (USA). from Baker Roll-Off Boxes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you