Only show results in Connecticut? Ok

sludge dewatering process equipment

  • Premium

    Andritz PowerDrum - Model PDR - Drum Thickeners for Sludge Thickening

    With more than 30 years of experience in the development and manufacturing of drum thickeners, ANDRITZ SEPARATION has acquired unmatched expertise in this technology. The PowerDrum (PDR) is considered to be an easy and efficient sludge thickening solution prior to the dewatering process and can deal with biological sludge throughputs ranging from ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Screens, Drains, and Presses Product line

  • Premium

    Hydroflux Industrial - Complete Dewatering Systems

    Hydroflux Industrial not only supply dewatering equipment such as Belt Presses, Screw Presses, Filter Presses and Centrifuges but we have the skills and experience to design and construct an entire dewatering plant. In order to effectively manage and dewater sludge generated form industrial wastewater processes, a number of steps are required. ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux Industrial - Sludge Dewatering Product line

  • Cequesta - Model ASP - Automated Sludge Press

    The ASP (Automated Sludge Press) is a powerful wastewater treatment system able to treat many types of industrial wastewater or sludge in one single operation unit. Sludge dewatering treatment is, in simple terms: removing excess liquid from the sludge at minimum expenses and achieving the highest level of dryness. Dealing with ...

    By Cequesta Water based in Gan Yavne, ISRAEL.

  • Vitone MR. SLUDGE - Skid Unit

    The Suite of Mr. Sludge is a plug-and-play sludge-dewatering plant which takes just the room of a standard container. Once delivered, you do not have to take it out, since it has been pre-assembled inside the container before leaving our factory and it works from inside.  The container is fully-equipped with any device or facility required ...

    By Vitone Eco S.r.l. based in Bitonto, ITALY. from Other Products - Mr. Sludge Product line

  • Solid Cationic Flocculant

    The ECOPOL CS series is polyacrylamide based solid polymers with high molecular weight and different charge densities. These cationic polyelectrolytes act as floc formation accelerators, generally in flotation systems, and as water-sludge separation agents, also improving sludge dewatering processes in centrifuges and band filters. 

    By Servyeco based in Alcora, SPAIN. from Chemicals for Waste Water Product line

  • Wastewater Treatment Plant

    The NUOERFLOC range of polymers and flocculants are widely used in the treatment of wastewater from both municipal and industrial wastewater treatment plants.Municipal Wastewater Treatment Our products is used in all solid-liquid settlement, separation and sludge dewatering processes (centrifuge, belt press)in municipal wastewater treatment. ...

    By Dongying Nuoer Chemical CO.,LTD based in Qingdao, CHINA.

  • Belt Presses

    Belt presses are presented as the best solution for sludge dewatering processes with continuous and high flow rates required systems. Low initial investment compared to other dewatering equipment costs and low operating costs of belt presses is emerging as advantageous. AESP series of belt presses are produced in four different sizes for the ...

    By AES aritma based in Istanbul, TURKEY.

  • Current Water - Model AmmEL-HC - Higher Concentrations Ammonia Removal System

    An advanced technology that is well suited for treatment of municipal and industrial wastewater, storm water as well as contaminated groundwater. Municipal wastewater treatment plants can employ AmmEL-HC after sludge dewatering processes to prevent ammonia toxicity to the activated sludge process. It is an excellent complimentary system for ...

    By Current Water Technologies Inc. (CWTI) based in Guelph, ONTARIO (CANADA).

  • Premium

    Flottweg - Model OSE - Decanter Centrifuge

    The Flottweg OSE Decanter. Optimal Sludge Dewatering of Primary and Excess Sludge; The decomposition process in a sewage treatment facility continually generates biological sludge. To ensure a stable decomposition process in the biological cleaning stage, this biological sludge must be removed. The removed biological sludge is called surplus ...

    By Flottweg SE based in Vilsbiburg, GERMANY. from Decanter Product line

  • PolyCat - Batch Polymer Systems

    Use Batch type polymer blending and injection system for the preparation of liquid polymer to aid in the flocculation of sludge in the dewatering process. The batch tank method allows for the time necessary to “uncoil” the long chain polymer molecules making them more effective in reacting with sludge solid particles.

    By ParkProcess, a subsidiary of ParkUSA based in Houston, TEXAS (USA). from Chemical Treatment Product line

  • Model AS-DEHYDRATOR - Sludge Thickening & Dewatering Processes

    The spiral dehydrator is used for the thickening and subsequent dewatering of sludge. The equipment is small and lightweight and can work in automatic operation with minimal maintenance requirements. The device guarantees the thickening of activated sludge to at least 18% of dry matter, for sludge from municipal WWTPs.

    By ASIO, spol. s r.o. based in Brno, CZECH REPUBLIC. from Municipal Wastewater Treatment Plants - Sludge Management Product line

  • Salsnes - Stand-Alone Dewatering Unit

    To save space and money, the enclosed SF systems contain an integrated sludge thickening and dewatering process. Typical dewatering results are 20–30% DM. For larger installations, a stand-alone dewatering unit is available (shown below) to dewater sludge from multiple filters. It applies higher pressure to produce even drier sludge (20 ...

  • In-Line Mixer Valve

    Spirofil-Averinox optimizes also wastewater treatment systems. If your dewatering installation (sieve belt press, plate filter press, dewatering table, etc.) does not operate optimally, this may lead to excessive / not optimal sludge production (sludge is the wet residue produced during wastewater treatment). We are able to analyse your wastewater ...

    By Spirofil BV based in Haarlem, NETHERLANDS.

  • ECOPOL - Model AL series - Liquid Lineal Cationic Flocculant

    The ECOPOL AL series is polyacrylamide based liquid emulsified polymers with high molecular weight and different charge densities. These cationic polyelectrolytes act as accelerators in floc formation, generally in flotation systems, and as agents for separation of water from sludge, improving dewatering processes such as centrifuges and band ...

    By Servyeco based in Alcora, SPAIN. from Chemicals for Waste Water Product line

  • Wastewater Treatment Plant

    Physical / Chemical Processes. Biological Processes: Activated Sludge ~ Extended Aeration, Aerated Lagoon, Trickling Filter, Sequencing Batch Reactor. Anaerobic - UASB Process. Sludge Dewatering System.

    By PT. Envitech Perkasa based in Jakarta, INDONESIA.

  • Hi-Pass - Static Sludge Mixer

    The KOMAX Hi-Pass Sludge Mixer is designed to effectively mix polymer solution into sludge flows prior to dewatering process. Polymer savings in excess of 25% can be achieved. Features of this unit include:

    By Komax Systems, Inc. based in Huntington Beach, CALIFORNIA (USA). from Other Products Product line

  • EKOFINN - Polymer Units

    EKOFINN supplies different technologies for sludge dewatering. For all applications there are different POLYDILUTION polymer units available to prepare polyelectrolyte on site. The polymer is required for the dewatering process as it binds sludge particles to larger conglomerates called floccs. Polymer is supplied either as powder, liquid or ...

    By EKOFINN Energie- & Wassertechnik GmbH based in Tecklenburg-LeedenLotte, GERMANY. from Sludge Dewatering Product line

  • WTP - Shaftless Screw Conveyors

    Shaftless screw conveyors, an enclosed conveying system designed without internal shafts or bearings to eliminate wrapping and plugging, are the equipment of choice for handling wet, coarse, sticky and stringy materials: wastewater screenings, dewatered sludge, grit, food processing and pulp and paper wastes. Choose from standard equipment designs ...

    By WTP Equipment Corp. based in Brampton, ONTARIO (CANADA).

  • Poliflock - Flocculants - Water Soluble Synthetic Acrylamide Polymer

    Company Ekotakas sells Poliflock brand flocculants. Poliflock flocculants are cationic, anionic, non-ionic. Our flocculants can be used in variuous processes: Sludge dewatering, secondary sludge sedimentation improvement, waste water treatment, drinking water treatment. Flocculants - water soluble synthetic acrylamide polymers and coopolymers of ...

    By Ekotakas UAB based in Kaunas, LITHUANIA. from Materials for Effluent Treatment Product line

  • Hidroambiente - Wastewater Treatment Plants (WWTPs)

    Our designs range from conventional Wastewater Treatment Plants (WWTPs) to more innovative layouts including SBR, MBR or EDR technologies. We boast many re-vamping references in large WWTPs through the integration of thermal sludge drying systems, large mechanical dewatering processes, auxiliary cogeneration plants, tertiary treatments for water ...

    By Hidroambiente based in Las Arenas, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you