Sludge Disposal Equipment
-
Manufactured by Albax Incbased in USA
These heavy-duty, 1 cubic yard bags hold the equivalent of 3 to 4 barrels of F006 sludge – giving you a significant cost savings over barrels. UN approved, the Albax sludge disposal bag is a closed-bottom, duffel top, woven polypropylene bag, with a separate, inner polyethylene liner (3mil or 6mil) as a moisture ...
-
Manufactured by ELIQUO WATER GROUP GmbHbased in GERMANY
Disposing of sewage sludge is expensive. In addition to the energy costs, it generates the largest portion of operating costs. As a result, the goal must be to reduce the amount of sludge to the greatest extend possible. In addition sludge represents a major energy resource. Digestion alone only makes use of this potential to a ...
-
based in SPAIN
Disposal of surplus activated sludge is becoming a major environmental and economical problem within the European Union. Transposition of the Urban Wastewater Treatment Directive (91/271/EEC) and, in some cases, further development by EU-member countries of the Sewage Sludge (86/278/EEC) and Landfill of Waste (99/31/EC) Directives, ...
-
Manufactured by Miranda Water Treatment Systemsbased in TURKEY
Suspended solids in wastewater are removed in biological treatment modules and sludge collected at the bottom of the modules should be removed periodically. Sludge disposal vane serves to remove this sludge to prevent the odor production and accumulation of the sludge. Only one vane is used for each ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
into water at certain working pressure. In the process, pressurized water is saturated with dissolved air and is discharged into a flotation vessel. The microscopic air bubbles produced by released air attach to suspended solids and float them to the surface, forming a sludge blanket. A scoop removes the thickened sludge. Finally, it complete ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
into water at certain working pressure. In the process, pressurized water is saturated with dissolved air and is discharged into a flotation vessel. The microscopic air bubbles produced by released air attach to suspended solids and float them to the surface, forming a sludge blanket. A scoop removes the thickened sludge. Finally, it complete ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The centrifuge for dewatering sewage sludge. The transportation and disposal of the sewage sludge accounts for a large proportion sewage treatment plant costs. The lower the sludge volume, the lower the cost of transportation and disposal. High-performance in sludge dewatering is the decisive ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
GWT specialized electrocoagulation water treatment systems have several advantages versus conventional chemical coagulation for drinking water applications. One of the foremost problems faced by the present world is accessibility to clean & safe drinking water. According to the World Health Organization (WHO), nearly 1.1 billion people do not have access to a clean drinking water source. With ...
-
Manufactured by East India Equipments Pvt Ltd.based in INDIA
We also offer conventional effluent treatment plants with Activated Sludge Process, where it is economical compared to chemical oxidation. Usually when organic load is higher and biodegradable, and when sludge disposal is not an issue, these systems are ...
-
Manufactured by Convertobased in USA
Bottom: This Sludge Applicator is not yet mounted and depicts the broadcasting mechanism. This equipment is used much like a Ram e Jec sludge disposal specialist. There is one big difference. Whereas the hydraulic ram blade pushes out the load in the Ram e Jec, the sludge applicator adds a rotating beater bar assembly that ...
-
Manufactured by Aqua-Zyme Disposal Systems, Inc.based in USA
Aqua-Zyme’s Debris Filter is designed to help remove trash, rags and any other unwanted debris from entering your storage tanks and your sludge disposal equipment. The filter is easy to clean, with a three-part fiberglass removable screen. The filter has several cleaning ports for easy access to remove any clogs that might occur. You ...
-
by Aqanabased in NETHERLANDS
very limited time frame. By upgrading to anaerobic treatment you can multiply your treatment capacity. Sludge disposal is brought to a minimum. Instead of consuming huge amounts of energy, the DACS will produce significant energy from ...
-
Manufactured by Claro Incbased in CANADA
Claro Big Bubble Gun Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This ...
-
Manufactured by Hoffland Environmental, Inc. (HEI)based in USA
The use of an HEI sludge dryer provides up to a 4 to 1 reduction of sludge volume. This results in a dramatic reduction of sludge disposal and handling costs and provides a rapid payback period. HEI manufactures batch process. The batch process dryers use steam, gas, or electric heat sources. ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
plant determines the method of sludge disposal. The sludge that accumulates at the bottom can either be scraped into the sludge funnel or be pumped to the pipeline of the central structure by suction pipes. Numerous options can be proposed for both methods. The selection of scraper bridge type is another major issue and the ...
-
Manufactured by Minergy Corporation Limitedbased in UNITED KINGDOM
Minergy Corp. Develops Innovative Technology: Wastewater treatment systems, both industrial and municipal, produce large quantities of sludge that require disposal. Unfortunately, sludge disposal poses significant environmental liabilities, logistical problems and economic ...
-
Manufactured by AAQUA N.V.based in BELGIUM
drain valves for sludge ...
-
Manufactured by Kontek Process Water Managementbased in CANADA
Evaporate up to two-thirds of your disposal costs with the original under-the-press sludge dryer. ConRec continues to be a leading sludge dryer brand for one reason: consistent results that yield higher profits. Built to last with corrosion-resistant materials, you can depend on your ConRec sludge dryer to perform for many ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you