Only show results available in Michigan? Ok

sludge handling system equipment

  • Premium

    SedVac - Sediment Removal System

    The SedVac Sediment Dredge System is a sediment removal system designed to clean your clarifier by effectively removing the compression zone layer of sludge. Unlike clog-prone vacuum pipes, the SedVac system can handle high concentrations of sludge and grit and is capable of consistently removing solids of 3% concentration across a wide range of ...

    By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Water and Wastewater Treatment Product line

  • Premium

    Andritz - Sludge Drying Process System

    Economic, compact and safe The ANDRITZ Paddle dryer can be used for dewatering sludge (of various types) in waste water treatment plants. Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Process Lines Product line

  • Premium

    Andritz - Partial Sludge Drying

    Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being incinirated, ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Process Lines Product line

  • Model API - Separator

    Flow rate to 20,000 gpm •  Integrated sludge handling systems •  Can operate in 20øF conditions with tank heating

    By Hudson Industries based in Vienna, OHIO (USA). from OWS/ Oil Water Separators Product line

  • Bio-Sludge Handling System

    The intensive production of Nordic Salmon and other sea food has increased the need for water purification and residue treatment. It has become an industry to treat the water in the fish tanks to minimize water consumption and to reduce the environmental impact. This again has created a demand for aquaculture sludge handling, becoming the next ...

    By Scanship AS based in Tønsberg, NORWAY.

  • DAS Recycler

    DAS RECYCLER is designed to recycle polluted water, removes oil's (free or emulsified), sand, grit, and other pollutants from wastewater without use of expensive filters. The sludge handling system included makes this system a 'closed loop' plant where water can be re-used over and over again. The DAS Recycler can be hooked up to a 'High-Pressure ...

    By DYNAMIC AQUA SCIENCE INDUSTRIA E COMÉRCIO LTDA based in São Paulo, BRAZIL.

  • DEWA - Sludge Thickening and Dewatering

    Sludge generation is an important part of the water and wastewater treatment process, since inadequate sludge handling system can lead to serious environmental problems.

    By Dewaco OY based in LAITILA, FINLAND.

  • DY - Model NEP - Latest Design Belt Filter Press for Waste Sludge Treatment

    During the process of water& wastewater treatment, sludge generation is an important and at times crucial issue to be addressed as inadequate sludge handling system can pose serious environmental implications.

    By Doyen Machinery CO., Ltd based in Foshan City, CHINA. from Belt Filter Press Product line

  • Akar WEt Sludge Handling (AWESH) System

    This is a novel concept introduced for the first time in Northern India by Akar. The system involves handling of sludge without human hand contact. Normally sludge after being dewatered is packed in bags and transported to another site for further drying. However, the sludge from Filter Press is semi dry or rather semi wet. Handling this in bags ...

    By AKAR IMPEX PVT. LTD. based in Noida, INDIA.

  • Ventus - Biofilter System

    The Ventus compact biofilter units are designed to treat medium volume airstreams wherever odorair emissions occur, particularly in wastewater treatment plants, pumping stations, sludge handling units, sewage storage systems where putrefaction potential exist. These filters are developed for our own constructed WWTP-s, of course we are open to ...

    By Pureco Idea Ltd. based in Budapest, HUNGARY.

  • Accel-o-Fac - Zero-to-Low Energy Wastewater Treatment System

    Accel-o-Fac is a zero-to-low energy wastewater treatment system requiring no sludge handling and utilising wind energy. In many cases, there is little in the way of ongoing operating costs.

    By Gurney Environmental Ltd. based in King’s Lynn, UNITED KINGDOM.

  • Model AR - Submersible Aerator

    With fast industrial developments, human life became more materially civilized. On the contrary, gigantic quantities of waste water were brought by the industrial manufacturing. In the meantime, large quantities of household waste water were also resulted from our daily life. All these have affected the living quality and damaged the environmental ...

    By GSD Industrial Co., Ltd. based in CHINA.

  • Londonese - Sludger for De-Oiling Machine

    The concept of the Sludger was to produce a de-oiling machine to handle sludge which was discharged from Pre-coat filter systems. These systems use a powder to increase the filtration capabilities of the filter element. Having installed units manufactured by others we found that the level of cleanliness of the recovered fluid was very poor. This ...

    By Londonese International Trading Co. Ltd based in East Tilbury, UNITED KINGDOM.

  • ABS - Model VSDB - Vacuum De-Watering Bed

    application throughout the world. It accomplishes rapid de-water of most type of municipal waste and water treatment sludge, as well as a variety of industrial sludges. The Vacuum Sludge De-watering Bed System combines the overall simplicity of conventional sand bads with the faster handling of sludge associated with mechanical systems. For most ...

    By ABS Engineering (Hong Kong) Limited based in Shatin, CHINA.

  • Pneumatic Conveying Systems

    Claro offers pneumatic conveyor/pneumatic ejector systems that can transport a wide range of materials of varying characteristics. Design features and advantages: Pneumatic transport of a wide range of materials of varying characteristics wet and dry, thin and viscous, fine and course-grained (up to 65 mm [2 ½'] dia.) with a density of up to 4.0. ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

  • Solids Outloading Systems

    Claro designs and manufactures fully-automated outloading systems for wastewater screenings, grit, sludge, and a wide variety of other materials. Backed by over 25 years of design and applications experience, Claro systems fill material bins or truck trailers evenly, without spillage or splashing, and to precise volumes, levels, or weights all ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

  • NESL - Tanksweeps

    The NESL Tanksweep system is designed for the de-sludging of petroleum & chemical storage tank by the control and circulation of high velocity liquid streams through directable nozzles fitted to the tank shell. Depending on the size of the tank and the product stored up to four sets of tank sweeps might be required with each of them where ...

    By Non Entry Systems Ltd (NESL) based in Swansea, UNITED KINGDOM. from Tank Cleaning and Sludge Handling Equipment Product line

  • Model Type SC - Archimedean Screw Sludge Pumps

    Archimedean screw pumps (are designed for handling highly polluted liquids, sludge, etc., of temperature up to 50 °C. They are of a simple, sturdy design and of a high service reliability, long life, simple operation and high efficiency. They are capable of handling liquids with fairly large and even fibrous admixtures, without  the ...

    By GESS-CZ, s.r.o. based in Hranice, CZECH REPUBLIC.

  • Maximus System

    The dewatering system consists of the Alfa Laval G2-120 decanter centrifuge mounted in our 53' air ride, triple axle semi-trailer. The trailer contains the  sludge conditioning equipment, chemical enhancement system and solids handling equipment.  Control of the system is from a climate controlled room  located at the front of the ...

    By P & H Senesac Inc. based in Milton, VERMONT (USA).

  • Converto - Model RAM E JEC - Horizontal Discharge Systems

    Biosolids are the by-product of any water waste treatment plant.  But sludge hauling doesn't require sludge handling.  The Ram e Jec horizontal discharge system but Converto works with hydraulic power to make manual handling unnecessary.  Load hang ups, common in gravity dependent dump systems, rarely happen with this ...

    By Converto based in Cambridge City, INDIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you