Only show results available in Connecticut? Ok

sludge heat exchanger equipment

  • BIO-HTX - Sludge Heat Exchanger

    Napier-Reid has emerged as a leading manufacturer of sludge heat exchangers for municipal and industrial wastewater treatment plants.

    By Napier-Reid Ltd. based in Toronto, ONTARIO (CANADA). from Wastewater Treatment Solutions Product line

  • CSO Lackeby - Sludge Heat Exchanger

    The Lackeby Heat exchanger sludge / sludge unit consists of two heat exchangers sludge / water connected by a closed water circuit. This creates a compact unit that is simple to install and minimises installation volume. The closed water circuit between the heat exchangers eliminates the risk of digested or pasteurised sludge being ...

    By CSO Group Ltd based in Edenbridge, UNITED KINGDOM. from Heat Exchangers Product line

  • Model WCrr - Sludge Heat Exchangers

    Type WCrr heat exchangers are used to heat sewage sludge, process suspended solids and other media with dry matter less than 8%.We offer heat exchangers with housing, one or multi-sectional. Sludge recuperators are produced with autonomous heating systems and external heat transfer water loops. Heat exchanging pipelines are insulated with 5 to ...

    By SiGa-Tech Sp. z o.o. Sp. K. based in Iwanowice, POLAND. from Heat Exchangers & Recuperators Product line

  • Claro - Water-To-Sludge Heat Exchangers

    Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge energy transfer. Claro modular tube-in-shell heat exchangers, large gap heat exchangers, and Big Bubble Gun Mixers with heating jackets can suit a wide variety of applications and footprints.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Heat Exchangers & Energy Recovery Product line

  • Claro Sludge-To-Sludge Heat Exchangers

    Claro designs and manufactures two proprietary heat exchangers that heat, cool, and recover energy by means of sludge-to-sludge energy transfer. Claro twin modular tube-in-shell or large gap heat exchangers can suit a wide variety of applications and footprints. Claro heat exchangers are designed for: optimal heat transfer efficiencies, small, ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Heat Exchangers & Energy Recovery Product line

  • Model WT - Double-Pipe Sludge Heat Exchanger

    Our double-pipe heat exchanger is used to efficiently heat sludge at biogas and waste water treatment plants.Using the counter-flow principle, sludge is heated evenly, and flows back to the process. Our WT is custom-designed, manufactured entirely in stainless steel.

    By Bilgeri EnvironTec GmbH based in Nüziders, AUSTRIA. from Equipment for Anaerobic Digesters Product line

  • Premium

    Muffin Monster - Model 30K & 40K - Sewage Grinders

    Legendary Performance Only A Muffin Monster Sewage Grinder Can Provide. The 30K & 40K In-line Muffin Monster sewage grinders have been providing peace of mind to treatment plant operators and collections managers for over 45 years. Wastewater professionals repeatedly turn to a JWC sewage grinder for the ultimate sludge grinder solution to cut ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Sludge Processing Product line

  • Premium

    Muffin Monster - Model 10K - In-line/Open-channel Grinders

    The 10K In-line Muffin Monster is the perfect fit for many smaller wastewater sludge processing systems. Packed with power, this sludge grinder converts the 2, 3 or 5 hp (1.5, 2.2 or 4 kW) motor into a cutting force ready to keep sewage and sludge flowing through progressive cavity pumps, valves, centrifuges and heat exchangers. Two stacks of ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Municipal Grinders Product line

  • Premium

    Muffin Monster - Model 10K - In-line Sludge Grinder

    Sewage is No Match For This Little Monster Sludge Grinder. The 10K In-line Muffin Monster is the perfect fit for many smaller wastewater sludge processing systems. Packed with power, this sludge grinder converts the 2, 3 or 5 hp (1.5, 2.2 or 4 kW) motor into a cutting force ready to keep sewage and  sludge flowing through progressive cavity ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Sludge Processing Product line

  • Claro Digester Performance Audits

    Claro provides comprehensive audits of anaerobic digestion systems including digester mixing system, gas safety, and sludge heat exchanger performance. Our engineers and designers have extensive experience with all major types of mixing and heating systems.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Premium

    Muffin Monster - Model 30K & 40K - In-Line Sewage Grinder

    The 30K & 40K In-line Muffin Monster sewage grinders have been providing peace of mind to treatment plant operators and collections managers for over 45 years. Wastewater professionals repeatedly turn to a JWC sewage grinder for the ultimate sludge grinder solution to cut down troublesome solids. It is ready for rags that can damage pumps, ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Municipal Grinders Product line

  • AmSperse - Model 4305 - Scale Inhibitor & Dispersant

    AmSperse 4305 provides highly effective control of a broad range of sludge and troublesome foulants that deposit on heat exchanger surfaces and act as a catalyst for foulants and other deposits. In addition to dispersion of foulants and suspended solids, AmSperse 4305 is an excellant general dispersant for suspended solids, sludge, mud, oil, ...

    By AmSolv based in Waxahachie, TEXAS (USA). from Dispersants / Fouling Control Product line

  • Primary Sludge

    Massive encrustations out of hardened fatty deposits in the entire pipe-lines (approx. 300 m). Expensive cleaning accomplished only with high pressure (milling) and modest success. The deposits could not be removed by using 120°C hot water and degreaser.

    By IFT - Institute of Fluid Technologies based in Bremerhaven, GERMANY.

  • Lysotherm - Sludge Digestion Plant

    LysoTherm is a novel, patented system for thermal disintegration of organic sludge, in particular sewage sludge. Its unique design enables the effective, economical and reliable disintegration of sludge, even in smaller treatment plants (from about 30,000 PE). The goal: The improvement in the anaerobic stabilisation (digestion) of organic sludge, ...

    By Eliquo Water Group GmbH based in Bad Homburg v.d.H., GERMANY.

  • Sludge Hygienization / Sludge Pasteurization

    Equipment consists of recuperative exchanger, pasteurization exchanger and pasteurization container.Equipment works with undrained sludge with dry matter content 5 to 8 %.Non-treated sludge is preheated in recuperative exchanger with utilization of heat recovery from pasteurized sludge.Preheated sludge is warmed by heating water on given ...

    By EKOMVO s.r.o. based in Praha, CZECH REPUBLIC. from Sludge Management Product line

  • DMT Sulfurex - Water Treatment Systems

    The expansion of DMT in 2014 with an extra office on the Watercampus in Leeuwarden, enables us to respond to the significant international growth we experience in water-related technologies. Our successfully exported IWOX system, with over 1600 plants worldwide for waste water treatment, and our MemBioRex, Odourex and SBR systems, form the basis ...

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS. from Water Treatment Product line

  • Lysotherm - Thermal Pressure Hydrolysis System

    Proudly we present our own LysoTherm Thermal Pressure Hydrolysis system. LysoTherm is applied for thermal pressure treatment of Waste Acticvated Sludge’s (WAS) produced during the biological treatment of sewage. Lysotherm is a so called continuous TPH system, treating sludge’s of 2-12%ds in various operational configurations with ...

    By ELIQUO Water & Energy B.V. based in Barneveld, NETHERLANDS.

  • VOR - Model LTD Series - Belt Dryer

    Sludge is dried to save sludge hauling and disposal costs, and to use as fertilizer as well as fuel—its caloric value is similar to that of lignite. A further reduction of the sludge weight is possible with help of sludge drying, by evaporating the remaining bound water in the dewatered sludge.

    By Shanghai VOR Separation Technology Co.,Ltd based in Pudong Dist, CHINA.

  • USA-Sludge - Low Temperature Heat Pump Sludge Dryer

    USA Sludge uses an advanced heat pump technology, our low temperature sludge dryer operates at a temperature between 120 – 185 degrees Fahrenheit. Recycling waste heat that is generated in the machine increases efficiency and lowers the energy needed to dry sludge.  Moisture that is trapped inside the cabinet, a by-product of sludge ...

    By USA Sludge based in Phoenix, ARIZONA (USA). from Wastewater and Sludge Treatment System Product line

  • Municipal Application

    Clarifier Scum. Vaughan Pumps handle both primary and secondary clarifier scum without plugging or air binding. The optional recirculator is available for both the Vertical Wet Well or Submersible pumps for large pits, or pits with long retention times, to allow pre-mixing of the stratified scum prior to pumpout. The oil bath bearing system allows ...

    By Vaughan Company., Inc. based in Montesano, WASHINGTON (USA). from Applications Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you