Sludge Oil Equipment Available In Mississippi
-
Manufactured by Atlas Incinerators ApSbased in DENMARK
Atlas Incinerators recommend a 1-tank system since it is much simpler to operate one tank automatically than two tanks manually. By not using a settling tank the crew will save time, not needing to settle water out. Sludge oil mixing tanks are delivered with a circulation pump and a mill pump for agitation and comminution of the tank ...
-
Manufactured by Zhonghan Machinery Equipment (Tianjin) Co., Ltd.based in CHINA
Oil sludge is also called oily sludge, oil sludge sand, ground oil sludge and so on. During the drilling process, the oily sludge brought out by the drilling rig when replacing and extracting the casing is left around the well site. The oily ...
-
Manufactured by Xinxiang Huayin Renewable Energy Equipment co. Ltdbased in CHINA
Input material: oil based drilling mud, oil sludge, crude oil, waste engine oil, asphalt, etc. Output products: 75% Shale sand, 15% combustible gas, 10% fuel oil. Material of reactor: Q345R Boiler plate/SS310/310S+Q345R. Capacity/D:20 Tons to 50 tons. Reactor thickness: 14mm/16mm/18mm. Cooling ...
-
Manufactured by GN SOLIDS CONTROLbased in CHINA
GN Oil Sludge Treatment equipment is to use chemical to wash the oil sludge with heat to temperature of 60-70 C degree. After washing the sludge is pumped to GN solids control equipment to separate into oil, water and solids. The recycled water can be reused in the washing process, and the ...
-
Manufactured by RJ Dewaterintel Environment Co.,Ltd.based in CHINA
Sludge is firstly fed into the Flow Control Tank and then flows down into the Flocculation Tank, where polymer coagulant is added. From there, the flocculated sludge overflows into the dewatering drum where it is filtered and compressed. The entire operation sequence, including sludge feed control, polymer makeup, dosing and ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
Multidisc sludge dewatering screw press is integrated with sludge flocculation tank which efficiently mixes the input sludge with the optimal dose of flocculation. This flocculated sludge then enters the screw body which in the initial stage has more open area to dewater the separated water faster.As screw rotates at a rpm which ...
-
Manufactured by Enrestec Incbased in TAIWAN
and sludge treatment. The finished product is the finished product when the quality of the pyrolysis oil is controlled to the control standard. ...
-
Manufactured by Solids Control Services (SCS)based in UNITED KINGDOM
Waste reduction. Recovery of valuable resources (oil). Cost savings through reduced disposal cost. EU/UK environmental compliance.. EU/UK safety compliance - designed for use in potentially explosive atmospheres. EU/UK health compliance - vapour extraction ...
-
Manufactured by AWAS International GmbHbased in GERMANY
The 3 stage separator for industrial use. The vortex separator AWAS Galaxie Tower combines the classic oil separator, coalescence separator and sludge trap. This solution is for maximum efficiency, safety and saving space – all in one component. Attention: oils will be automatically unloaded, as well as sludge. The compact ...
-
Manufactured by Henan Doing Machinery Equipment Co., Ltd.based in CHINA
Oil sludge has increased during oil/petroleum exploration engineering as our demand for oil/petroleum is getting larger, so does the pollution it brings to our land. If you want to dispose of it, an oil sludge recycling pyrolysis plant may help you a lot. You can also invest in this plant to make ...
-
based in CHINA
There is money in oily waste. Our automated oil recovery system reclaims up to 99.7% of the contained hydrocarbons, turning waste into profit. You save money from minimized discharge costs and make money from valuable oil at the same time. Discover the technology behind the zero oil-waste ...
-
Manufactured by Henan Doing Mechanical Equipment Co., Ltdbased in CHINA
Waste oil sludge thermal desorption unit (TDU), also called pyrolysis plant, is used in contaminated oil sludge and oily soil treatment fields. With the TDU unit, you can get fuel oil from the oil sludge. Henan Doing Company specially designed it to meet different waste raw ...
-
Manufactured by AWAS International GmbHbased in GERMANY
The AWAS Galaxie Tower separates oil and sludge at the same time. Surface oil will be collected via a patented removal system in an oil tank. Sludge and particles will quickly settle at the bottom, from where they can easily be ...
-
Manufactured by Solids Control Services (SCS)based in UNITED KINGDOM
Waste reduction. Cost savings through reduced disposal cost. EU/UK environmental compliance. EU/UK safety compliance - designed for use in potentially explosive atmospheres. EU/UK health compliance - vapour extraction ...
-
Manufactured by Henan Doing Mechanical Equipment Co., Ltdbased in CHINA
Petroleum oil sludge has increased during petroleum oil exploration engineering as our demand for petroleum oil is getting larger, so does the pollution it brings to our land. If you want to dispose of it, an oil sludge recycling pyrolysismachine may help you a lot. You can also invest in this ...
-
Manufactured by Labkotec Oybased in FINLAND
The SET-2000 Oil/Sludge is equipped with two probes, one indicates the oil layer and the other indicates when there is sand or sludge between the sensing elements of the SET/S2 ultrasonic ...
-
Manufactured by NPO Dekanter, LLCbased in RUSSIA
(sludge thickening), a rough separation of liquids with solids separation, fine separation for the final purification of the release of water, hydrocarbons and other ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
The LW decanter separator is suitable for plant oil,( such as palm oil, coconut oil, olive oil separation ,) animal oil(such as fish oil, restaurant garbage ect) fish meal, coal tar dehydration and slag, adapted to the different viscosity and water content in coal tar separation (emulsion), ...
-
Manufactured by ART Engineering, L.L.C. (ART)based in USA
ART provides waste treatment solutions to the petroleum, and petrochemical industries to treat and manage a multitude of hazardous and non-hazardous refinery waste streams. ART utilizes a combination of physical separation proven technologies for processing of Tank Bottom Sludges, Refinery Wastes, Hydrocarbon Residues, Hydrocarbon (oil) ...
-
Manufactured by NPO Dekanter, LLCbased in RUSSIA
BRNSH-10 allows removing water from some liquid oil products, including waterlogged oil fuel and oil sludge. Evaporating is done under vacuum, which allows reaching high efficiency with low costs. Average prime cost of drying 1 ton of oil fuel of M-100 type from 25% to 0.5% of humidity is equal to about 550 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you