sludge pump Equipment in Italy

  • Jurop - Suction and Liquid/Sludge Pumping Units

    Three configuration steps: Jurop pumps: reliability, duration, versatility. Power transmission: electric motors, diesel or petrol engines, compressed-air motors. Last but not least, mounting frame: stationary or mobile. This is Jurop engine driven pumping unit design; custom made and efficient for any application. There is not a standard unit, as ...

    By Jurop s.p.a. based in Azzano Decimo, ITALY. from Powered Units Product line

  • Showcase

    Intereco - Model Rotoset Series - Dynamic Thickeners

    The unit is complete with vertical cylindrical reactor with impeller for a perfect sludge/polyelectrolite mixing, with a centrifugal filter cloth washing water pump, able to recycle the thickener filtrate, this to avoid water consumption and the increasing of the WWTP hydraulic head. The drum is driven by a motor gear reducer to control rotation ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Premium

    Intereco - Model EM 5 & EM 10 - Manual Polyelectrolite Preparation Unit

    Manual polyelectrohte preparation unit all made in AISI 304 stainless steel with all necessary components mounted on board. The unit is complete with electrical impeller, water feeder, dosing pump with flowmeter, post-dilution device. The solution can be prepared at a concentration ranging between 0.5% and 1% then is diluted at about 0.1% with the ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Premium

    Intereco - Model TF Series - Bet Filter Press

    Four models with capacities from 30 to 85 mc/h of sludge. Municipal and industrial sludges volume reduction. Sludges prethickening before dehydratation with belt filter press. Continous sludges dehydratation with inlet dry solid from 0.5% to 1.5% t.s.s. Filtering belt washing with recycled water without consumption - no increase of Hydraulic load. ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Premium

    Intereco - Automatic Polyelectrolyte Preparation Unit

    Available current models 600 It (two tanks) ( BSB600), 1200 It, 2000 It (three tanks) (BTB 1200 AND BTB 2000) and, under request 3000 It, 4000 It and 5000 It. All models have a simple and reliable functioning. With a bar level controls the polyelectrolite preparation is activated to have always the polyelectrolite tank full. The polyelectrolite ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • SIMPEC - Sludge Treatment System

    Simpecprovides sludge treatment systems coming from waste water treatment processes or from other workmanships.

    By SIMPEC S.r.l. based in Nova Milanese (MB), ITALY. from Sludge Treatment Product line

  • Model CAD - Dynamic Thickener

    The dynamic thickner CAD is a rotating drum machinery, which is able to thicken the sludges not thickened, till arriving to a concentration of 10-12%.The sludge, conditioned with chemical reagents (polyelectrolytes), is introduced in the mixer, equipped with variable rotations stirrers. This mixer is positioned outside the thickner and is used to ...

    By COSME srl based in Torri Di Quartesolo, ITALY. from Sludge Treatment Product line

  • Premium

    Sludge Thickener

    The sludge thickener is a machine fitted with a stake and scraper blade structure connected to the central pin that, by rotating in clockwise direction, make the gases present in the water surface and at the same time it allows conveying the debris (sludge, etc.) into the concrete basin, located in the middle of the tank bottom, from where they ...

    By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY.

  • Model DIAMOND SERIES - Single-Screw Pump

    Screw pump due to the small dimensions of the hight, allow the pumping of the product without pulsation and keep the fluid unaltered without damage it. Accept the presence of solid parts and can be suitable to pump fluid with viscosity up to 1.000.000 cps. Application fields are oil sludge, bilge water and sea water, dirty waste water and sludges, ...

    By Fluid Global Solutions Srl based in La Spezia, ITALY. from Screw Pumps Product line

  • Premium

    Sludge Scraper Bridge

    Sludge scraper bridge: Under the effect of the slow and continuous rotation, the sludge scraper bridge conveys the decanted sludge through the sludge scraper blades to a central tank at the bottom of the basin and hence, extracted through systems like immersion pumps, telescopic valve, spillway, etc. The sludge scraper bridge can also be fitted ...

    By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rotating Settler Product line

  • Model PVA - Archimedean Screw Pump

    The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance which well meet the lifting requirements for water containing sludge, and the automatic flow control which automatically occurs according to ...

    By Sereco S.r.l. based in Noci (BA), ITALY. from Screw Pumps Product line

  • Model VX - Radially Split Single Stage Pump

    Radially split single stage pumps with vortex impeller which allows for certain sizes to handle liquids with suspended solids having a size up to 80% of the nozzle diameters. The packing gland allows the installation of mechanical seals and packing rings of any kind. Upon request, they can be fitted with chambers to cool or heat the casing and/or ...

    By Finder Pompe S.r.l. based in Merate (LC), ITALY. from Process Pumps Product line

  • CMO - Model MN/MNT/MN inox/MNT inox Series - Pump

    The MN series pumps belong to the rotating positive-displacement pump category. The MN series has been perfected with the aim of achieving maximum performance in line with such compact dimensions and a highly competitive price. The reduced weight and compact dimensions allow this pump to be used in restricted spaces and in situations that are not ...

    By C.M.O. POMPE s.n.c. based in Orgiano (VI), ITALY.

  • Premium

    Central Drive Sludge Scraper Bridge

    The central drive sludge scraper bridge is a machine fitted with a central shaft with arms and scraper blades that rotate in clockwise direction and thus convey the debris (sludge, etc.) towards the middle of the reinforced concrete tank, from where they are extracted by a system such as immersion pumps, telescopic valve, spillway, etc. On ...

    By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rotating Settler Product line

  • Model R series - Cast Iron and Bronze Wobble Pumps

    R series have compact and linear design, it has a good price-performance ratio and not pulsating flow without jeopardize the physic, chemical and organoleptic characteristics of fluids. The wobble pump is used for many different application, slightly abrasive, viscous or gravel liquids. Are available an bronze version for marine use.

    By Nova Rotors srl based in Sossano VI, ITALY. from Wobble Pumps Product line

  • Model KS - Horizontal Centrifugal Pump

    Horizontal centrifugal pumps, single stage and axial suction with vortex impeller, dismounting support foot allowing setting of discharge flange in 3 different positions.

    By Pompe Rotomec Srl based in Cernusco S/N, ITALY. from Horizzontal Pumps Product line

  • Premium

    Verderflex - Model Dura 45 - Industrial Peristaltic Hose Pump

    The Verderflex Dura 45 is the pathfinder in a new generation of medium flow, industrial hose pumps. A product of intensive engineering investigation, with genuine class-leading performance, the Verderflex Dura 45 combines a close-coupled pump’s compactness with a long coupled pump’s easy serviceability. Additionally, its innovative, ...

  • Premium

    Sludge Scraper Bridge with Controlled Extraction

    The sludge scraper bridge with controlled extraction is installed on a sedimentation tank with flat and/or inclined bottom. The inlet of the water to be treated and the sludge extraction occur coaxially towards the centre of the tank, through two pipes.

    By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Rotating Settler Product line

  • Premium

    Verderflex - Dura 55 Peristaltic Industrial Hose Pumps

    The Verderflex Dura 55 is the class leader for this size of peristaltic pump, significantly outperforming its competitors in both continuous and intermittent duty applications. 

  • Model T – LT - Progressive Cavity Pump with Bridge Breaker System

    Execution as type “T”-LT” but with a “bridge breaker” system to transfer products which have the tendency to bridge above the infeed screw (e.g. dewatered sludges from belt press). Capacity up to 260 m3/h – Pressure up to 24/30 bar.

    By Bellin S.p.a based in ORGIANO, ITALY. from Progressive Cavity Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you