sludge pump Equipment in Arizona

49 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Portable Sludge Pump – Biosolids Transfer Pump

by WeDoTanks.com LLC     based in Sahuarita, ARIZONA (USA)

Years of experience in the field of Wastewater Treatment led HTI to develop their own exclusive portable sludge / biosolids transfer pump, and now it is available to you. These biosolids transfer pumps are portable - able to be hauled on a trailer with a 3/4-ton pickup truck. This portable sludge pump features a high-volume agitation rate, and is ...

Air Diaphragm Pumps

by BakerCorp     Office in Laveen, ARIZONA (USA)

Ideal Usage: Sludge and slurries, flood control and dewatering situations associated with refineries. Applications where compressed air is available.

Sludge Heating Systems

by WesTech Engineering, Inc.     Distributor in ARIZONA (USA)

WesTech offers sludge heating solutions for nearly any anaerobic digestion application. From mesophilic to thermophilic, WesTech's versatility and experience ensure that our sludge heating equipment will provide years of dependable service. We can provide heat exchangers to be piped into existing hot water systems or a complete boiler/ heat ...

Model AD - Floating Weir Permanently Open Pump Discharge System

by Aquaturbo Systems, Inc.     based in Springdale, ARIZONA (USA)

Discharges subsurface laminar layer of clean water without disturbing the sludge blanket or floatables. Gravity and pump options are available with mechanical actuation to close the weir during aeration and mixing phases preventing wastewater or activated sludge entering the discharge pipe.

Townley - Submersible Slurry Pumps

by Townley Engineering & Manufacturing Co., Inc     Office in Eloy, ARIZONA (USA)

The Townley Submersible Slurry Pumps are designed to dewater the most abrasive sumps and ponds found in mining and coal fired power plants. The MSP pump line uses a modular platform approach, where standard motors and wet-ends can be paired to match the customer’s voltage, flow and head requirements. Designed with North American motors and ...

Model Q-PRESS - Screw Press

by Huber SE     Distributor in ARIZONA (USA)

The Q-PRESS is a screw press with a conical screw shaft and cylindrical sieves consisting of three treatment zones: inlet and drive zone, three-part thickening and dewatering zone, and press zone with pneumatic counter-pressure cone. In the first part of the thickening and dewatering zone the supernatant is quickly removed by the feed pump via a ...

STRAINPRESS - Sludgecleaner

by Huber SE     Distributor in ARIZONA (USA)

The STRAINPRESS® is a horizontal pipe-shaped coarse material separator which consists of inlet and driving zone, screening and press zone and finally a discharge section with a conical pressure regulating device. The coarse material is separated continuously under pressure and periodical cleaning of the screening zone by backwashing is not ...

Model MD 24-42 F - Mobile DAF Pilot System

by Piedmont Technical Services, Inc.     based in Scottsdale, ARIZONA (USA)

THE P-Tec Mobile Daf Pilot System Complete with the following: mixed equalization tank, daf feed pump, flowmeter, flocculator, daf system, sludge collection tank, sludge pump, pH Controls and Pumps, coagulant pump, polymer mix tanks with mixers, polymer pumps, electrical control panel, jartesting lab.

Model KOS S - Tube Piston Pump

by Putzmeister Solid Pumps GmbH     Distributor in ARIZONA (USA)

In the KOS series the intake and delivery cylinders are connected by an S-tube. This permits the material to be pumped straight through without interruptions or mechanical obstacles and without any valves. Foreign substances in the material can therefore be conveyed without problems up to a maximum particle size of 50 % of the delivery material. ...

Model EKO - Single Piston Pump

by Putzmeister Solid Pumps GmbH     Distributor in ARIZONA (USA)

The EKO series is designed for the most extreme pumping tasks. The open filling hoppers enable a feeding of the pump with extremely dry material with a high content of foreign substances. The hydraulic driven piston also moves materials which have been regarded as not-pumpable, such as highly dewatered paper sludges.

Model AD GRAVITY - Floating Weir Decanter Systems

by Aquaturbo Systems, Inc.     based in Springdale, ARIZONA (USA)

Discharges subsurface laminar layer of clean water without disturbing the sludge blanket or floatables. Gravity and pump options are available with mechanical actuation to close the weir during aeration and mixing phases preventing wastewater or activated sludge entering the discharge pipe.

Phase Separators / Turbo Roll-Off Boxes

by BakerCorp     Office in Laveen, ARIZONA (USA)

Separating and dewatering sludges, slurries and waste streams. Liquid drains through or can be pumped from the installed filter media panels and out of the container via discharge ports

Model HSP - Seat Valve Piston Pump

by Putzmeister Solid Pumps GmbH     Distributor in ARIZONA (USA)

The HSP series is used for pasty and highly viscous material with a low content of foreign bodies and small particle sizes (Precise sealing of the valves achieves extremely high pumping pressures. The installation principle of the hydraulic and pumping pistons corresponds to the Putzmeister KOS and KOV series. This ensures the maximum reliability ...

Medium Pressure Submersible Chopper Pump DG-I

by Landia     Distributor in ARIZONA (USA)

Submersible pump with cast iron casing. 14 motor sizes from 0.55 to 30 kW. Pump diameters from 50 to 150 mm. Capacity up to approx. 475 m³/hour. Horizontal or vertical installation (shown here with vertical support leg).

High Pressure Submersible Chopper Pump DGR-I

by Landia     Distributor in ARIZONA (USA)

Submersible pump, all in acid-proof stainless steel. Two motor sizes, 15 and 18.5 kW. Pump diameter 80 mm. Capacity up to approx. 140 m³/hour. Horizontal or vertical installation (shown here with horizontal support leg).

Medium Pressure Submersible Chopper Pump DGR-I

by Landia     Distributor in ARIZONA (USA)

Submersible pump, all in acid-proof stainless steel. Six motor sizes from 3.0 to 18.5 Kw. Pump diameters from 80 to 105 mm. Capacity up to approx. 330 m³/hour. Horizontal or vertical installation (shown here with vertical support leg).

High-Pressure Submersible Chopper Pump DG-I

by Landia     Distributor in ARIZONA (USA)

Submersible pump with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Pump diameters from 50 to 80 mm. Capacity up to approx. 220 m³/hour. Horizontal or vertical installation (shown here with horizontal support leg).

Screw Pump

by Lakeside Equipment Corporation     Distributor in ARIZONA (USA)

Lakeside Screw Pumps are an efficient means of lifting large quantities of water or wastewater at low heads. For municipal wastewater treatment plants, screw pumps offer a variety of applications, ranging from return activated sludge to stormwater pumping. These pumps are widely accepted by engineers because of their proven design and trouble-free ...

Medium Pressure Chopper Pump For Dry Installation MPTK-I

by Landia     Distributor in ARIZONA (USA)

Dry-installed pump for industrial purposes, fitted with cast iron casing. 14 motor sizes from 0.55 to 30 kW. Capacity up to approx. 475 m³/hour. Horizontal or vertical installation (fixed) (shown here with horizontal support leg). Supplied without knife system (Available with standard- or extended knife system). Can be used as booster for ...

Landia - Model MPFR-I - Medium Pressure Long-Shaft Fish Chopper Pump

by Landia     Distributor in ARIZONA (USA)

Long-shaft pump for industrial purposes with all submersible parts in acid-proof stainless steel (used in the food- and fishing industry). Four motor sizes from 15 to 30 kW. Pipe diameter 5'. Tank depth up to 4.0 metres. Capacity up to approx. 380 m³/hour. Vertical installation (shown here with accessories: floor plate and bottom mixer).

Need help finding the right suppliers?

Let the XPRTs do the work for you